Increased fatigue strength of partially stabilised zirconia achieved by shot peening

References

• R. C. Garvie, R. H. Hannink and R. T. Pascoe: ‘Ceramic steel?’, Nature, 1975, 258, 703–704. doi: 10.1038/258703a0
   Web of Science ®Google Scholar
• T. Kawakubo and A. Goto: ‘Static and cyclic fatigue of precracked ceramics at room temperature’, J. Soc. Mater. Sci., Japan, 1988, 37, 939–944. doi: 10.2472/jsms.37.939
   Google Scholar
• V. Zelizko and M. V. Swain: ‘Influence of surface preparation on the rotating flexural fatigue of Mg-PSZ’, J. Mater. Sci., 1988, 23, 1077–1082. doi: 10.1007/BF01154016
   Web of Science ®Google Scholar
• K. Majima, K. Amafuji, H. Nagai and K. Shoji: ‘Fatigue behaviour of Y-PSZ under alternating stresses', J. Mater. Sci. Lett., 1989, 8, 183–185. doi: 10.1007/BF00730719
   Google Scholar
• T. Liu, R. Matt and G. Grathwohl: ‘Static and cyclic fatigue of 2Y-TZP ceramics with natural flaws', J. Eur. Ceram. Soc., 1993, 11, 133–141. doi: 10.1016/0955-2219(93)90044-R
   Google Scholar
• K. Takahashi, T. Amano, K. Ando and F. Takahashi: ‘Improvement of fatigue limit by shot peening for high-strength steel containing a crack-like surface defect’, Int. J. Struct. Integrity, 2011, 2, 281–292. doi: 10.1108/17579861111162888
   Google Scholar
• K. Takahashi, H. Okada and K. Ando: ‘Effects of shot peening on the torsional fatigue limit of high-strength steel containing an artificial surface defect’, Int. J. Struct. Integrity, 2012, 3, 274–284. doi: 10.1108/17579861211264389
   Google Scholar
• M. Nakagawa, K. Takahashi and T. Osada: ‘Improvement in fatigue limit by shot peening for high-strength steel containing crack-like surface defect: influence of surface crack aspect ratio’, ASME 2013 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, PVP 2013, Paris, France, V005T011A025, 7 pages.
   Google Scholar
• J. Yasuda, K. Takahashi and H. Okada: ‘Improvement of fatigue limit by shot peening for high-strength steel containing a crack-like surface defect: influence of stress ratio’, Int. J. Struct. Integrity, 2014, 5, 45–59. doi: 10.1108/IJSI-07-2013-0012
   Google Scholar
• I. Fernández-Pariente, S. Bagherifard, M. Guagliano and R. Ghelichi: ‘Fatigue behavior of nitrided and shot peened steel with artificial small surface defects', Eng. Fract. Mech., 2013, 103, 2–9. doi: 10.1016/j.engfracmech.2012.09.014
   Web of Science ®Google Scholar
• J. Sakamoto, Y.-S. Lee and S.-K. Cheong: ‘Effect of surface flaw on fatigue strength of shot-peened medium-carbon steel’, Eng. Fract. Mech., 2015, 133, 99–111. doi: 10.1016/j.engfracmech.2014.11.005
   Web of Science ®Google Scholar
• R. Fueki, K. Takahashi and K. Houjou: ‘Fatigue limit prediction and estimation for the crack size rendered harmless by peening for welded joint containing a surface crack’, Mater. Sci. Appl., 2015, 6, 500–510.
   Google Scholar
• W.-J. Moon, T. Ito, S. Uchimura and H. Saka: ‘Toughening of ceramics by dislocation sub-boundaries', Mater. Sci. Eng. A, 2004, 387–389, 837–839. doi: 10.1016/j.msea.2004.01.133
   Web of Science ®Google Scholar
• W. Pfeiffer and T. Frey: ‘Strengthening of ceramics by shot peening’, J. Eur. Ceram. Soc., 2006, 26, 2639–2645. doi: 10.1016/j.jeurceramsoc.2005.06.036
   Web of Science ®Google Scholar
• K. Takahashi, Y. Nishio, Y. Kimura and K. Ando: ‘Improvement of strength and reliability of ceramics by shot peening and crack healing’, J. Eur. Ceram. Soc., 2010, 30, 3047–3052. doi: 10.1016/j.jeurceramsoc.2010.07.030
   Web of Science ®Google Scholar
• K. Takahashi and Y. Nishio: ‘Improvement of the contact strength of Si3N4/SiC by a combination of shot peening and crack-healing’, J. Sol. Mech. Mater. Eng., 2012, 6, 41–52.
   Google Scholar
• T. Oki, H. Yamamoto, T. Osada and K. Takahashi: ‘Improvement of the contact strength of Al2O3/SiC by a combination of shot peening and crack-healing’, J. Powder Technol., 2013, 946984, 5 pages.
   Google Scholar
• Y. Itoh, S. Suyama and T. Fuse: ‘Effect of soft shot peening on bending strength of partially stabilized zirconia’, J. Ceram. Soc. Jpn., 2003, 111, 776–780. doi: 10.2109/jcersj.111.776
   Web of Science ®Google Scholar
• P. P. Shukla and J. Lawrence: ‘Micro-shot peening of zirconia-advanced ceramic: an examination of surface integrity’, J. Mater. Sci., 2015, 50, 1728–1739. doi: 10.1007/s10853-014-8734-x
   Web of Science ®Google Scholar
• K. Takahashi, K. Iwanaka, T. Osada and H. Koike: ‘Increase in strength of partially stabilized zirconia after shot peening’, J. Mater. Eng. Perf., 2015, 24, 3573–3578. doi: 10.1007/s11665-015-1623-x
   Web of Science ®Google Scholar
• H. Koike, K. Iwanaka and K. Takahashi: ‘Measurement of sliding wear of shot-peened partially stabilized zirconia plate’, Appl. Mech. Mater., 2014, 597, 353–357. doi: 10.4028/www.scientific.net/AMM.597.353
   Google Scholar
• J. C. NewmanJr and I. S. Raju: ‘An empirical stress-intensity factor equation for the surface crack’, Eng. Fract. Mech., 1981, 15, 185–192. doi: 10.1016/0013-7944(81)90116-8
   Web of Science ®Google Scholar
• Rp API, Fitness-for-service, American Petroleum Institute, C3–C10; 2000, Washington, USA.
   Google Scholar