Absorptivity and purification of La in as-cast pure copper

References

• M. Barmouz, P. Asadi, M. K. Besharati Givi and M. Taherishargh: ‘Investigation of mechanical properties of Cu/SiC composite fabricated by FSP: effect of SiC particles' size and volume fraction’, Mater. Sci. Eng. A., 2011, 528, 1740–1749. doi: 10.1016/j.msea.2010.11.006
   Web of Science ®Google Scholar
• M. Barmouz, M. K. Besharati Givi and J. Seyfi: ‘On the role of processing parameters in producing Cu/SiC metal matrix composites via friction stir processing: investigating microstructure, microhardness, wear and tensile behavior’, Mater. Charact., 2011, 62, 108–117. doi: 10.1016/j.matchar.2010.11.005
   Web of Science ®Google Scholar
• A. M. Alfantazi, T. M. Ahmed and D. Tromans: ‘Corrosion behavior of copper alloys in chloride media’, Mater. Des., 2009, 30, 2425–2430. doi: 10.1016/j.matdes.2008.10.015
   Web of Science ®Google Scholar
• Z. Y. Shi and D. Q. Wang: ‘Surface dispersion hardening Cu matrix alloy’, Appl. Surf. Sci., 2000, 167, 107–112. doi: 10.1016/S0169-4332(00)00526-2
   Web of Science ®Google Scholar
• J. Gubicza, K. Sitarama Raju, V. Subramanya Sarma, A. Kauffmann, Z. Hegedűs, M. Peterlechner, J. Freudenberger and G. Wilde: ‘The effect of thermomechanical treatment on the microstructure and the mechanical behavior of a supersaturated Cu-Ag Alloy’, Mater. Sci. Forum., 2015, 812, 53–58. doi: 10.4028/www.scientific.net/MSF.812.53
   Google Scholar
• G. Purcek, H. Yanar, O. Saray, I. Karaman and H. J. Maier: ‘Effect of precipitation on mechanical and wear properties of ultrafine-grained Cu–Cr–Zr alloy’, Wear., 2014, 311, 149–158. doi: 10.1016/j.wear.2014.01.007
   Web of Science ®Google Scholar
• M. Pellizzari: ‘Influence of deep cryogenic treatment on heat treatment of steel and Cu–Be alloy’, Inter. Heat Treat. Sur. Eng., 2010, 4, 105–109. doi: 10.1179/174951410X12712449937243
   Google Scholar
• M. J. Wang, L. Chen and Z. X. Wang: ‘Effect of rare earth addition on continuous heating transformation of a high speed steel for rolls', J. Rare Earths., 2012, 30, 84–89. doi: 10.1016/S1002-0721(10)60644-8
   Web of Science ®Google Scholar
• X. W. Hu, F. G. Jiang, F. R. Ai and H. Yan: ‘Effects of rare earth Er additions on microstructure development and mechanical properties of die-cast ADC12 aluminum alloy’, J. Alloys Compd., 2012, 538, 21–27. doi: 10.1016/j.jallcom.2012.05.089
   Web of Science ®Google Scholar
• S. Golmakaniyoon and R. Mahmudi: ‘Comparison of the effects of La- and Ce-rich rare earth additions on the microstructure, creep resistance, and high-temperature mechanical properties of Mg–6Zn–3Cu cast alloy’, Mater. Sci. Eng. A., 2011, 528, 5228–5233. doi: 10.1016/j.msea.2011.03.083
   Web of Science ®Google Scholar
• T. Du: ‘The effect and mechanism of rare earth elements in metals’, Chin. J. Nonferrous Met., 1996, 13, 6–10 ( in Chinese).
   Google Scholar
• S. J. Xu and M. Zhang: ‘Effect of rare earth (La-Ce) on rapidly solidified Cu-Cr alloy’, Trans. Mater. Heat Treat., 2005, 18, 74–78.
   Google Scholar
• F. C. Wang, W. P. Peng, Y. Xiao, J. H. Yang and S. K. Guan: ‘Effect of MM (Mistchmetal) element on microstructure and fluidity of Cu-30Ni-20Fe-5Al alloy’, Special Casting Nonferrous Alloys., 2012, 32, 485–488 ( in Chinese).
   Google Scholar
• G. Y. Sun: ‘Effect of deformation and aging treatment on electrical conductivity of Cu-Cr alloy’, J. Rare Earths., 2005, 23, 419–422.
   Web of Science ®Google Scholar
• G. L. Lin, Y. X. Zhou, J. H. Zeng, Y. M. Zou, J. Liu and L. P. Sun: ‘Influence of rare earth elements on corrosion behavior of Al-brass in marine water’, J. Rare Earths., 2011, 29, 638–644. doi: 10.1016/S1002-0721(10)60513-3
   Web of Science ®Google Scholar
• G. L. Lin, W. Yang, Y. C. Wan, P. J. Tang, B. Wei and S. H. Zhang: ‘Influence of rare earth elements on corrosion resistance of BFe10-1-1 alloys in flowing marine water’, J. Rare Earths., 2009, 27, 259–263. doi: 10.1016/S1002-0721(08)60231-8
   Web of Science ®Google Scholar
• A. Palenzona and S. Cirafici: ‘The la-pb (lanthanum-lead) system’, J. Phase Equilib., 1992, 13, 36–42. doi: 10.1007/BF02645374
   Google Scholar
• H. Okamoto: ‘La-Si (lanthanum-silicon)’, J. Phase Equilib. Diff., 2007, 28, 585–585. doi: 10.1007/s11669-007-9204-9
   Web of Science ®Google Scholar
• W. C. Wang, J. H. Li, H. F. Yan and B. X. Liu: ‘A thermodynamic model proposed for calculating the standard formation enthalpies of ternary alloy systems', Scr. Mater., 2007, 56, 975–978. doi: 10.1016/j.scriptamat.2007.01.044
   Web of Science ®Google Scholar
• V. R. Sidorko and L. V. Goncharuk: ‘Thermodynamics of rare earth metal interaction with copper’, Powder Metall. Met. Ceram., 2006, 45, 136–142. doi: 10.1007/s11106-006-0054-5
   Web of Science ®Google Scholar
• S. J. Zhou, B. J. Zhao, Z. Zhao and X. Jin: ‘Application of lanthanum in high strength and high conductivity’, J. Rare Earths., 2006, 24, 385–388. doi: 10.1016/S1002-0721(06)60081-1
   Web of Science ®Google Scholar
• Y. Chen, S. H. Zhang, H. W. Song, M. Cheng, H. H. Li and J. S. Liu: ‘Sudden transition from columnar to equiaxed grain of cast copper induced by rare earth microalloying’, Mater. Des., 2016, 91, 314–320.
   Web of Science ®Google Scholar
• T. M. Wang, Z. N. Chen, H. W. Fu, L. Gao and T. J. Li: ‘Grain refinement mechanism of pure aluminum by inoculation with Al–B master alloys’, Mater. Sci. Eng. A., 2012, 549, 136–143. doi: 10.1016/j.msea.2012.04.019
   Web of Science ®Google Scholar