References
- Q. Qian, L. G. Xu and F. H. Chang: ‘International welding engineering training course, part I: welding processed and equipment’, 2014, Harbin, Harbin Welding Training Institute.
- S. S. Yao, G. Y. Li and W. B. Hu: ‘Surface science and technology’, 2004, Beijing, Machinery Industry Press.
- Z. Y. Dong and Q. Y. Huang: ‘Development status of surfacing welding in China and abroad’, Proceedings of the Eighth National Conference on Welding, Beijing, 1997, Machinery Industry Press.
- Y. Y. Ren, G. S. Zhang, S. Z. Wei and L. J. Xu: ‘Development and prospect of surfacing welding technology in China’, Weld. Technol., 2012, 6, (41), 1–4.
- X. Y. Han: ‘Functions of Nb, V and Ti in micro-alloyed steel’, Wide Heavy Plate, 2006, 12, (1), 39–41.
- A. J. Deardo: ‘Niobium in modern steels', Int. Mater. Rev., 2003, 48, (6), 371–402. doi: 10.1179/095066003225008833
- S. Traint, A. Pichler, R. Sierlinger, H. Pauli and E.A. Werner: ‘Low-alloyed TRIP-steels with optimized strength, forming and welding properties', Steel Res. Int., 2006, 77, (9), 641–649.
- H. Hu, G. Xu, L. Wang, Z. Xue and Y. Zhang: ‘The effects of Nb and Mo addition on transformation and properties in low carbon bainitic steels', Mater. Des., 2015, 84, (4), 95–99.
- J. J. Qi, Y. H. Huang and Y. Zhang: ‘Micro-alloyed steels', 2006, Beijing, Metallurgy Industry Press.
- X. W. Chen, G. Y. Qiao, X. L. Han, X. Wang and F. R. Xiao: ‘Effects of Mo, Cr and Nb on microstructure and mechanical properties of heat affected zone for Nb-bearing X80 pipeline steels', Mater. Des., 2014, 53, (1), 888–901. doi: 10.1016/j.matdes.2013.07.037
- X. W. Chen, B. Liao, G. Y. Qiao, Y. Gu and W. Xu: ‘Effect of Nb on mechanical properties of HAZ for high-Nb X80 pipeline Steels', J. Iron Steel Res. Int., 2013, 20, (12), 53–60. doi: 10.1016/S1006-706X(13)60216-2
- I. Hemmati, V. Ocelík and J. T. M. De Hosson: ‘Toughening mechanism for Ni–Cr–B–Si–C laser deposited coatings', Mater. Sci. Eng. A – Struct., 2013, 582, 305–315. doi: 10.1016/j.msea.2013.06.010
- I. Hemmati, R. M. Huizenga, V. Ocelík and J. T. M. De Hosson: ‘Microstructural design of hardfacing Ni–Cr–B–Si–C alloys', Acta Mater., 2013, 61, 6061–6070. doi: 10.1016/j.actamat.2013.06.048
- M. R. Ripoll, N. Ojala, C. Katsich, V. Totolin and C. Tomastik: ‘The role of niobium in improving toughness and corrosion resistance of high speed steel laser hardfacings', Mater. Des., 2016, 99, 509–520.
- L. Meyer, F. Heisterkamp and W. Mueschenborn: ‘Proc. Conf. on Microalloying 75’, New York, 1977, Union Carbide Corporation.
- T. M. Hoogendoorn and M. J. Spanraft: ‘Proc. Conf. on Microalloying 75’, New York, 1977, Union Carbide Corporation.
- G. Xu, F. Liu, L. Wang and H. Hu: ‘A new approach to quantitative analysis of bainitic transformation in a superbainite steel’, Scr. Mater., 2013, 68, (11), 833–836. doi: 10.1016/j.scriptamat.2013.01.033
- F. Hu, P. D. Hodgson and K. M. Wu: ‘Acceleration of the super bainite transformation through a coarse austenite grain size’, Mater. Lett., 2014, 122, (5), 240–243. doi: 10.1016/j.matlet.2014.02.051
- W. Nie, C. Shang, S. J. Wu, P. Shi and J. Cheng: ‘Effects of Nb on recovery of hot-deformed austenite’, Acta Metall. Sin., 2012, 48, (7), 775–781. doi: 10.3724/SP.J.1037.2012.00189
- V. Sklenička, K. Kuchařová, P. Král, M. Kvapilová and M. Svobodová: ‘The effect of hot bending and thermal ageing on creep and microstructure evolution in thick-walled P92 steel pipe’, Mater. Sci. Eng. A – Struct., 2015, 644, 297–309. doi: 10.1016/j.msea.2015.07.072
- S. Hashimoto, S. Ikeda, S. Koh-Ichi and S. Miyake: ‘Effects of Nb and Mo addition to 0.2%C-1.5%Si1.5%Mn steel on mechanical properties of Hot rolled TRIP-aided steel Sheets', ISIJ Int., 2004, 44, (9), 1590–1598. doi: 10.2355/isijinternational.44.1590