References
- Caballero FG, Bhadeshia HKDH, Mawella KJA, et al. Very strong low temperature bainite. Mater Sci Technol. 2002;18:279–284. doi: 10.1179/026708301225000725
- Garcia-Mateo C, Caballero FG, Bhadeshia HKDH. Development of hard bainite. ISIJ Int. 2003;43:1238–1243. doi: 10.2355/isijinternational.43.1238
- Caballero FG, Bhadeshia HKDH. Very strong bainite. Curr Opin Solid State Mater Sci. 2004;8:251–257. doi: 10.1016/j.cossms.2004.09.005
- Garcia-Mateo C, Caballero FG, Bhadeshia HKDH. Mechanical properties of low-temperature bainite. Mater Sci Forum. 2005;500–501:495–502. doi: 10.4028/www.scientific.net/MSF.500-501.495
- Garcia-Mateo C, Caballero FG. Ultra-high-strength bainitic steels. ISIJ Int. 2005;45:1736–1740. doi: 10.2355/isijinternational.45.1736
- Bhadeshia HKDH. Nanostructured bainite. Proc Royal Soc A. 2010;466:3–18. doi: 10.1098/rspa.2009.0407
- Garcia-Mateo C, Caballero FG, Bhadeshia HKDH. Low temperature bainite. J Phys IV. 2003;112:285–288.
- Garcia-Mateo C, Caballero FG, Bhadeshia HKDH. Acceleration of low-temperature bainite. ISIJ Int. 2003;43:1821–1825. doi: 10.2355/isijinternational.43.1821
- Peet M, Babu SS, Miller MK, et al. Three-dimensional atom probe analysis of carbon distribution in low-temperature bainite. Scr Mater. 2004;50:1277–1281. doi: 10.1016/j.scriptamat.2004.02.024
- de Andrés CG, Caballero FG, Capdevila C, et al. Revealing austenite grain boundaries by thermal etching: advantages and disadvantages. Mater Charact. 2002;49:121–127. doi: 10.1016/S1044-5803(03)00002-0
- DeHoff RT. Quantitative microstructural analysis. In: Fifty years of progress in metallographic techniques. Philadelphia: Americal Society for Testing and Materials; 1968. p. 63–95.
- ASTM E23-16b, Standard Test Methods for Notched Bar Impact Testing of Metallic Materials. West Conshohocken, PA: ASTM International; 2016. Available from: http://www.astm.org.
- ASTM E399-12e3, Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K of Metallic Materials. West Conshohocken, PA: ASTM International; 2012. Available from: http://www.astm.org/.
- ASTM E647-15e1, Standard Test Method for Measurement of Fatigue Crack Growth Rates. West Conshohocken, PA: ASTM International; 2015. Available from: http://www.astm.org/.
- Peet MJ. Transformation and tempering of low- temperature bainite [PhD thesis]. Cambridge: University of Cambridge; 2010.
- Miihkinen VTT, Edmonds DV. Fracture toughness of two experimental high-strength bainitic low-alloy steels containing silicon. Mater Sci Technol. 1987;3:441–449. doi: 10.1179/mst.1987.3.6.441
- Fielding LCD: Understanding toughness and ductility in novel steels with mixed microstructures [PhD thesis]. Cambridge: University of Cambridge; 2014.
- Matsuzaki A, Bhadeshia HKDH. Effect of austenite grain size and bainite morphology on overall kinetics of bainite transformation in steels. Mater Sci Technol. 1999;518:518–522. doi: 10.1179/026708399101506210
- Xu G, Liu F, Wang L, et al. A new approach to quantitative analysis of bainitic transformation in a superbainite steel. Scr Mater. 2013;68:833–836. doi: 10.1016/j.scriptamat.2013.01.033
- Hu F, Hodgson PD, Wu KM. Acceleration of the super bainite transformation through a coarse austenite grain size. Mater Lett. 2014;122:240–243. doi: 10.1016/j.matlet.2014.02.051
- Avishan B, Yazdani S, Nedjad SH. Toughness variations in nanostructured bainitic steels. Mater Sci Eng A. 2012;548:106–111. doi: 10.1016/j.msea.2012.03.098
- Peet MJ, Hill P, Rawson M, et al. Fatigue of extremely fine bainite. Mater Sci Technol. 2011;27(1):119–123. doi: 10.1179/026708310X12688283410244
- NIMS fatigue data sheet 7: Data sheets on elevated-temperature, low-cycle fatigue properties of SCMV 4(2.25Cr-1Mo) steel plate for pressure vessels. 1978.
- Garcia-Mateo C, Peet M, Caballero FG, et al. Tempering of hard mixture of bainitic ferrite and austenite. Mater Sci Technol. 2004;20:814–818. doi: 10.1179/026708304225017355
- Hasan HS, Peet MJ, Bhadeshia HKDH. Severe tempering of bainite generated at low transformation temperatures. Int J Mater Res. 2012;103:1319–1324. doi: 10.3139/146.110788
- Hulme-Smith CN, Lonardelli I, Peet MJ, et al. Enhanced thermal stability in nanostructured bainitic steel. Scr Mater. 2013;69:191–194. doi: 10.1016/j.scriptamat.2013.03.029
- Hasan HS, Peet MJ, Avettand-Fenoel M-N, et al. Effect of tempering upon the tensile properties of a nanostructured bainitic steel. Mater Sci Eng A. 2014;615:340–347. doi: 10.1016/j.msea.2014.07.097
- Podder AS, Bhadeshia HKDH. Thermal stability of austenite retained in bainitic steels. Mater Sci Eng. 2010;527:2121–2128. doi: 10.1016/j.msea.2009.11.063