References
- Yin F, Hua L, Mao HJ, et al. Constitutive modeling for flow behavior of GCr15 steel under hot compression experiments. Mater Des. 2013;43:393–401.
- Wang LJ, Yu W, Wu HB, et al. Hot deformation behaviors and mathematical model of 12MnNiVR steel. Heat Treat Met. 2010;35(7):5–8.
- Yang Q, Wang JF, Cong Y, et al. State of knowledge on lightweight steels (Part I) —Al-rich interstitial-free steels and ferritic lightweight steels. Baosteel Technol. 2015;3:1–10.
- Yang Q, Cong Y, Wang JF, et al. State of knowledge on lightweight steels (Part II)—ferrite-austenite dual-phase lightweight steels and austenitic lightweight steels. Baosteel Technol. 2015;4:1–8.
- Haghdadi N, Cizek P, Beladi H, et al. A novel high-strain-rate ferrite dynamic softening mechanism facilitated by the interphase in the austenite/ferrite microstructure. Acta Mater. 2017;126:44–57.
- Castan C, Montheillet F, Perlade A. Dynamic recrystallization mechanisms of an Fe–8% Al low density steel under hot rolling conditions. Scr Mater. 2013;68(6):360–364.
- Kuang S, Kang YL, Yu H, et al. Stress-strain partitioning analysis of constituent phases in dual phase steel based on the modified law of mixture. Int J Min Met Mater. 2009;16(4):393–398.
- Mi ZL, Tang D, Dai YJ, et al. In-situ observation on the deformation behaviors of Fe-Mn-C TWIP steel. Int J Min Met Mater. 2009;16(6):646–649.
- Li YP, Song RB, Wen ED, et al. Hot deformation and dynamic recrystallization behavior of austenite-based low-density Fe–Mn–Al–C steel. Acta Metall Sin (Engl Lett). 2016;29(5):441–449.
- Yang FQ, Song RB, Zhang LF, et al. Hot deformation behavior of Fe-Mn-Al light-weight steel. Proc Eng. 2014;81:456–461.
- Li HB, Jiao WC, Feng H, et al. Deformation characteristic and constitutive modeling of 2707 hyper duplex stainless steel under hot compression. Metals. 2016;6(9):223–240.
- Haghdadi N, Martin D, Hodgson P. Physically-based constitutive modelling of hot deformation behavior in a LDX 2101 duplex stainless steel. Mater Des. 2016;106:420–427.
- Yan T, Yu EL, Zhao YQ. Constitutive modeling for flow stress of 55SiMnMo bainite steel at hot working conditions. Mater Des. 2013;50:574–580.
- Behjati P, Araghchi M, Kermanpur A, et al. Constitutive model for describing flow behaviour of Fe–18Cr–10Mn–0·39N austenitic stainless steel. Mater Sci Technol. 2014;30(3):257–260.
- Quan GZ, Li YL, Zhang L, et al. Evolution of grain refinement degree induced by dynamic recrystallization for nimonic 80A during hot compression process and its FEM analysis. Vacuum. 2017;139:51–63.
- Wang L, Liu F, Zuo Q, et al. Prediction of flow stress for N08028 alloy under hot working conditions. Mater Des. 2013;47:737–745.
- Luan J, Sun C, Li X, et al. Constitutive model for AZ31 magnesium alloy based on isothermal compression test. Mater Sci Technol. 2014;30(2):211–219.
- Chen L, Wang LM, Du XJ, et al. Hot deformation behavior of 2205 duplex stainless steel. Acta Metall Sin. 2010;35:52–56.
- Bal B, Gumus B, Canadinc D. Incorporation of dynamic strain aging into a viscoplastic self-consistent model for predicting the negative strain rate sensitivity of hadfield steel. J Eng Mater Technol. 2016;138(3):1–8.
- Haghdadi N, Cizek P, Beladi H, et al. The austenite microstructure evolution in a duplex stainless steel subjected to hot deformation. Philos Mag. 2017;97(15):1209–1237.
- Balancin O, Hoffmann WAM, Jonas JJ. Influence of microstructure on the flow behavior of duplex stainless steels at high temperatures. Metall Mater Trans A. 2000;31(5):1353–1364.
- Martin G. Hot workability of duplex stainless steels [dissertation]. Université Grenoble Alpes; 2011.
- Duprez L, De Cooman BC, Akdut N. Flow stress and ductility of duplex stainless steel during high-temperature torsion deformation. Metall Mater Trans A. 2002;33(7):1931–1938.
- Cizek P. The microstructure evolution and softening processes during high-temperature deformation of a 21Cr–10Ni–3Mo duplex stainless steel’. Acta Mater. 2016;106:129–143.
- Cabrera JM, Mateo A, Llanes L, et al. Hot deformation of duplex stainless steels. J Mater Process Technol. 2003;143–144:321–325.
- Brown SB, Kim KH, Anand L. An internal variable constitutive model for hot working of metals. Int J Plast. 1989;5(2):95–130.
- Luo J, Li MQ, Li H, et al. Effect of the strain on the deformation behavior of isothermally compressed Ti–6Al–4V alloy. Mater Sci Eng A. 2009;505(1):88–95.
- Yu W, Xu LX, Zhang Y, et al. Research on the constitutive equation for high temperature flow behavior of 95CrMo steel. Trans Mater Heat Treat. 2015;36(10):261–267.
- McQueen HJ, Yue S, Ryan ND, et al. Hot working characteristics of steels in austenitic state. J Mater Process Technol. 1995;53(1):293–310.
- Xie BS, Cai QW, Yu W, et al. Prediction for flow stress of 95CrMo hollow steel during Hot compression. Acta Metall Sin (Engl Lett). 2017;30(3):250–260.
- Yoo SW, Lee CS, Park WS, et al. Temperature and strain rate dependent constitutive model of TRIP steels for low-temperature applications. Comput Mater Sci. 2011;50(7):2014–2027.
- Farnoush H, Momeni A, Dehghani K, et al. Hot deformation characteristics of 2205 duplex stainless steel based on the behavior of constituent phases. Mater Des. 2010;31(1):220–226.
- Yang YH, Yan B. The microstructure and flow behavior of 2205 duplex stainless steels during high temperature compression deformation. Mater Sci Eng A. 2013;579:194–201.
- Shaban M, Eghbali B. Determination of critical conditions for dynamic recrystallization of a microalloyed steel. Mater Sci Eng A. 2010;527(16):4320–4325.
- Sah JP, Richardson GJ, Sellars CM. Recrystallization during hot deformation of nickel. J Australian Inst Met. 1969;14(4):292–297.
- Puchi-Cabrera ES, Staia MH, Guérin JD, et al. Analysis of the work-hardening behavior of C–Mn steels deformed under hot-working conditions. Int J Plast. 2013;51:145–160.
- Xie BS, Cai QW, Wei Y, et al. A new constitutive model for the high-temperature flow behavior of 95CrMo steel. J Mater Eng Perform. 2016;25(12):5127–5137.
- Du RL, Wu K, Xu DA, et al. A modified Arrhenius equation to predict the reaction rate constant of Anyuan pulverized-coal pyrolysis at different heating rates. Fuel Process Technol. 2016;148:295–301.
- Jonas JJ, Quelennec X, Jiang L, et al. The Avrami kinetics of dynamic recrystallization. Acta Mater. 2009;57(9):2748–2756.
- Yue CX, Zhang LW, Liao SL, et al. Research on the dynamic recrystallization behavior of GCr15 steel. Mater Sci Eng A. 2009;499(1):177–181.
- Haghdadi N, Zarei-Hanzaki A, Abedi HR. The flow behavior modeling of cast A356 aluminum alloy at elevated temperatures considering the effect of strain. Mater Sci Eng A. 2012;535:252–257.