Strain-induced martensite reversion in 18Cr–8Ni steel – transmission Kikuchi diffraction study

References

• Olson GB, Cohen M. A mechanism for the strain-induced nucleation of martensitic transformations. J Less Common Met. 1972;28:107–118. doi: 10.1016/0022-5088(72)90173-7
   Google Scholar
• Sanderson G, Llewellyn D. Mechanical properties of standard austenitic stainless steels in the temperature range -196 to + 800°C. J Iron Steel Inst. 1969;207: 1129–1140.
   Web of Science ®Google Scholar
• Mangonon PL, Thomas G. The martensite phases in 304 stainless steel. Metall Trans A. 1970;1(6):1577–1586. doi: 10.1007/BF02642003
   Web of Science ®Google Scholar
• Mangonon PL, Thomas G. Structure and properties of thermal-mechanically treated 304 stainless steel. Metall Trans A. 1970;1(6):1587–1594. doi: 10.1007/BF02642004
   Web of Science ®Google Scholar
• Fahr D. Stress- and strain-induced formation of martensite and its effects on strength and ductility of metastable austenitic stainless steels. Metall Trans A. 1971;2(7):1883–1892.
   Web of Science ®Google Scholar
• Bogers AJ, Burgers WG. Partial dislocations on the {110} planes in the B.C.C. lattice and the transition of the F.C.C. into the B.C.C. lattice. Acta Metall. 1964;12(2):255–261. doi: 10.1016/0001-6160(64)90194-4
   Google Scholar
• Xu-Sheng Y, Sheng S, Xiao-Lei W, et al. Dissecting the mechanism of martensitic transformation via atomic-scale observations. Sci Rep. 2014;4:6141.
   PubMed Web of Science ®Google Scholar
• Tomimura K, Takaki S, Tokunaga Y. Reversion mechanism from deformation induced martensite to austenite in metastable austenitic stainless steels. ISIJ Int. 1991;31(12):1431–1437. doi: 10.2355/isijinternational.31.1431
   Web of Science ®Google Scholar
• Tomimura K, Takaki S, Tanimoto S, et al. Optimal chemical composition in Fe-Cr-Ni alloys for ultra grain refining by reversion from deformation induced martensite. ISIJ Int. 1991;31(7):721–727. doi: 10.2355/isijinternational.31.721
   Web of Science ®Google Scholar
• Santos TFA, Andrade MS. Dilatometric evaluation of strain-induced martensite reversion in type AISI 304 austenitic stainless steel. Materia (Rio J). 2008;13(4):587–596. doi: 10.1590/S1517-70762008000400003
   Web of Science ®Google Scholar
• Ghosh SK, Mallick P, Chattopadhyay PP. Effect of reversion of strain induced martensite on microstructure and mechanical properties in an austenitic stainless steel. J Mater Sci. 2011;46(10):3480–3487. doi: 10.1007/s10853-011-5253-x
   Web of Science ®Google Scholar
• Misra RDK, Nayak S, Mali SA, et al. On the significance of nature of strain-induced martensite on phase-reversion-induced nanograined/ultrafine-grained aust-enitic stainless steel. Metall Mater Trans A. 2010;41(1):3–12. doi: 10.1007/s11661-009-0072-2
   Web of Science ®Google Scholar
• Schino A D, Salvatori I, Kenny JM. Effects of martensite formation and austenite reversion on grain refining of AISI 304 stainless steel. J Mater Sci. 2002;37:4561–4565. doi: 10.1023/A:1020631912685
   Web of Science ®Google Scholar
• Forouzan F, Najaflzadeh A, Kermanpur A, et al. Artificial neural network models for production of nano-grained structure in AISI 304L stainless steel by predicting thermomechanical parameter. ISIJ Int. 2009;6(2):6–13.
   Google Scholar
• Rajasekhara S, Karjalainen LP, Kyrolainen A, et al. Microstructure evolution in nano/submicron grained AISI 301LN stainless steel. Mat Sci Eng A. 2010;527:1986–1996. doi: 10.1016/j.msea.2009.11.037
   Web of Science ®Google Scholar
• Rezaee A, Najaflzadeh A, Kermanpur A, et al. The influence of reversion annealing behaviour on the formation of nanograined structure in AISI 201L austenitic stainless steel through martensite treatment. Mater Des. 2011;32(8-9):4437–4442. doi: 10.1016/j.matdes.2011.03.065
   Web of Science ®Google Scholar
• Sun GS, Du LX, Hu J, et al. Ultrahigh strength nano/ultra fine-grained 304 stainless steel through three-stage cold rolling and annealing treatment. Mater Charact. 2015;110:228–235. doi: 10.1016/j.matchar.2015.11.001
   Web of Science ®Google Scholar
• Gong N, Wu HB, Niu G, et al. Effects of annealing temperature on nano/ultrafine-grained structure in austenite stainless steel. Mater Sci Tech. 2017;6. doi: 10.1080/02670836.2017.1310442.
   Web of Science ®Google Scholar
• Yagodzinskyy Y, Pimenoff J, Tarasenko O, et al. Grain refinement processes for superplastic forming of AISI 304 and 304L austenitic stainless steels. Mater Sci Tech. 2004;20(7):925–929. doi: 10.1179/026708304225019678
   Web of Science ®Google Scholar
• Forouzan F, Najaflzadeh A, Kermanpur A, et al. Production of nano/submicron grained AISI 304L stainless steel through the martensite reversion process. Mat Sci Eng A. 2010;527(27):7334–7339. doi: 10.1016/j.msea.2010.08.002
   Web of Science ®Google Scholar
• Wu HB, Wu FJ, Yang SW, et al. The formation mechanism of austenite structure with micro/sub-micrometer bimodal grain size distribution. Acta Metall Sin. 2014;50(3):269274.
   Web of Science ®Google Scholar
• Wu H, Niu G, Cao J, et al. Annealing of strain-induced martensite to obtain micro/nanometre grains in austenitic stainless. Mater Sci Tech. 2017;33(4):480–486. doi: 10.1080/02670836.2016.1229092
   Web of Science ®Google Scholar
• Nezakat M, Akhiani H, Hoseini M, et al. Effect of thermo-mechanical processing on texture evolution in austenitic stainless steel 316L. Mater Charact. 2014;98:10–17. doi: 10.1016/j.matchar.2014.10.006
   Web of Science ®Google Scholar
• Tokarski T, Cios G, Kula A, et al. High quality transmission Kikuchi diffraction analysis of deformed alloys - case study. Mater Charact. 2016;121:231–236. doi: 10.1016/j.matchar.2016.10.013
   Web of Science ®Google Scholar
• Sneddon GC, Trimby PW, Cairney JM. Transmission Kikuchi diffraction in a scanning electron microscope: a review. Mat Sci Eng R. 2016;110:1–12. doi: 10.1016/j.mser.2016.10.001
   Web of Science ®Google Scholar
• Kurdjumow G, Sachs G. Uber den Mechanismus der Stahlhartung. Z Phys. 1930;64:325–343. doi: 10.1007/BF01397346
   Google Scholar
• Nishiyama Z. X-ray investigation on the mechanism of the transformation from face-centered-cubic lattice to body-centered cubic lattice. Sci Rep Tohoku Univ. 1934;23:637–664.
   Google Scholar
• Wassermann G. Mitt. K-W-I Eisenforsch. 1935;17:149–158.
   Google Scholar