https://orcid.org/0000-0002-0661-691X
References
- Pariente IF, Belzunce FJ, Riba CRYJ. Mechanical strength and fracture toughness of high chromium white cast iron. Mater Sci Technol. 2008;24:981–985. doi: 10.1179/174328407X213161
- Buytoz S. Microstructural properties of M7C3 eutectic carbides in a Fe-Cr-C alloy. Mater Lett. 2006;60:605–608. doi: 10.1016/j.matlet.2005.09.046
- Zhang MX, Kelly PM, Gates JD. The effect of heat treatment on the toughness, hardness and microstructure of low carbon white cast iron. J Mater Sci. 2001;36:3865–3875. doi: 10.1023/A:1017949600733
- Sare IR. Abrasion resistance and fracture toughness of white cast iron. Met Technol. 1979;6:412–419. doi: 10.1179/030716979803276228
- Kootsookos A, Gates JD, Eaton RA. Development of a white cast iron of fracture toughness 40 MPa √m. Cast Met. 1995;7:239–246. doi: 10.1080/09534962.1995.11819184
- Radulovic M, Fiset M, Peev K, et al. The influence of vanadium on fracture toughness and abrasion resistance in high chromium white cast irons. J Mater Sci. 1994;29:5085–5094. doi: 10.1007/BF01151101
- Sare IR, Arnold BK. The influence of heat treatment on high-stress abrasion resistance and fracture toughness of alloy white cast irons. Metall Mater Trans A. 1995;26:1785–1793. doi: 10.1007/BF02670766
- Dun XL, Liu KP, Liu HS, et al. Effect of multicomponent modifier on microstructure and mechanical properties of high Ni-Cr-Mo cast iron. Mater Sci Technol. 2011;27:1840–1845. doi: 10.1179/1743284711Y.0000000070
- Davis JR. Classification and basic metallurgy of cast irons. In: Davis JR, editor. Materials Park, OH: ASM specialty handbook cast irons. ASM International; 1996. p. 3–12.
- Wiengmoon A. Carbides in high chromium cast irons. Naresuan Univ Eng J. 2011;6:64–71.
- Qiao Y, Kong X. An energy analysis of the grain boundary behavior in cleavage cracking in Fe-3wt.% Si alloy. Mater Lett. 2004;58:3156–3160. doi: 10.1016/j.matlet.2004.05.063
- Lu W, Chen J, Chakravarthula SS, et al. Resistance to cleavage cracking and subsequent shearing of high-angle grain boundary. Eng Fract Mech. 2010;77:768–775. doi: 10.1016/j.engfracmech.2009.12.009
- Argon AS, Qiao Y. Cleavage cracking resistance of large angle grain boundaries in Fe-3 wt% Si alloy. Philos Mag A. 2002;82:3333–3347.
- Lu W, Chen J, Chakravarthula SS, et al. Nonuniform cleavage cracking across persistent grain boundary. Mech Mater. 2011;43:567–573. doi: 10.1016/j.mechmat.2011.07.001