References
- Garcia-Mateo C, Caballero FG. Ultra-high-strength bainitic steels. ISIJ Int. 2005;45:1736–1740. doi: 10.2355/isijinternational.45.1736
- Sharma S, Sangal S, Mondal K. Development of new high-strength carbide-free bainitic steels. Metall Mater Trans A. 2011;42:3921–3933. doi: 10.1007/s11661-011-0797-6
- Bhadeshia HKDH, Edmonds DV. Bainite in silicon steels: new composition-property approach part 2. Met Sci. 1983;17:420–425. doi: 10.1179/030634583790420646
- Mondal D, Ghosh M, Pal J, et al. Effect of austempering treatment on microstructure and mechanical properties of high-Si steel. J Mater Sci. 2009;44:1069–1075. doi: 10.1007/s10853-008-3203-z
- Chang LC, Bhadeshia HKDH. Carbon of austenite in isothermally transformed 300M steel. Mater Sci Eng A. 1994;184:L17–L19. doi: 10.1016/0921-5093(94)91079-0
- Avner SH. Introduction to physical metallurgy. New Delhi: Tata McGraw Hill edition; 1997.
- Lindstrom A. Austempered high silicon steel: investigation of wear resistance in a carbide free microstructure [master’s thesis]. Sweden: Lulea University of Technology; 2006.
- Varshney A, Sangal S, Mondal K. Exceptional work-hardening behavior of medium-carbon high-silicon low-alloy steels. Metall Mater Trans A. 2017;48:589–593. doi: 10.1007/s11661-016-3863-2
- Oak Ridge, National laboratory – Metals and ceramics division online calculation. Available from: http://calculations.ewi.org/vjp/secure/TTTCCTPlots.asp
- American Society for Testing and Materials (ASTM). Standard test methods for tension testing of metallic materials. West Conshohocken (PA): ASTM International; 2009. Standard No. E8M-9:2009.
- Cullity BD. Elements of X-ray diffraction. Reading (MA): Addison-Wisley; 1974.
- Putatunda SK. Fracture toughness of a high carbon and high silicon steel. Mater Sci Eng A. 2001;297:31–43. doi: 10.1016/S0921-5093(00)01272-7
- Putatunda SK. Influence of austempering temperature on microstructure and fracture toughness of a high-carbon, high-silicon and high-manganese cast steel. Mater Des. 2003;24:435–443. doi: 10.1016/S0261-3069(03)00090-6
- Son J-Y, Kim J-H, Kim W-B, et al. Effects of austempering conditions on the microstructures and mechanical properties in Fe-0.9%C-2.3%Si-0.3%Mn steel. Met Mater Int. 2010;16:357–361. doi: 10.1007/s12540-010-0603-9
- Liu C, Zhao Z, Bhole SD. Lathlike upper bainite in a silicon steel. Mater Sci Eng A. 2006;434:289–293. doi: 10.1016/j.msea.2006.06.078
- Rao PP, Putatunda SK. Dependence of fracture toughness of austempered ductile iron on austempering temperature. Metall Mater Trans A. 1998;29:3005–3016. doi: 10.1007/s11661-998-0208-9
- Putatunda SK. Austempering of a silicon manganese cast steel. Mater Manuf Process. 2001;16(6):743–762. doi: 10.1081/AMP-100108696
- Holloman JH. Tensile deformation. Trans AIME. 1945;162:268–277.
- Daber S, Rao PP. Formation of strain-induced martensite in austempered ductile iron. J Mater Sci. 2008;43:357–367. doi: 10.1007/s10853-007-2258-6