Effect of Si on the partitioning of Mn between cementite and ferrite

References

• Makii K, Yaguchi H, Kaiso M, et al. Influence of Si on nano sub-structure of cementite lamellae in pearlitic steel wires. Scr Mater. 1997;37(11):1753–1759. doi: 10.1016/S1359-6462(97)00326-6
   Web of Science ®Google Scholar
• Fang F, Hu XJ, Chen SH, et al. Revealing microstructural and mechanical characteristics of cold-drawn pearlitic steel wires undergoing simulated galvanization treatment. Mater Sci Eng A – Struct Mater. 2012;547:51–54. doi: 10.1016/j.msea.2012.03.075
   Web of Science ®Google Scholar
• Park DB, Nam WJ. Effects of annealing temperature and Si content on mechanical properties of cold drawn pearlitic steel wires. In: Nam SW, Chang YW, Lee SB, et al., editor. Mechanical behavior of materials X, Pts 1and 2. Key engineering materials. Vol. 345–346. Stafa-Zurich: Trans Tech Publications Ltd; 2007. p. 65–68.
   Google Scholar
• Umemoto M, Liu Z, Masuyama K, et al. Influence of alloy additions on production and properties of bulk cementite. Scr Mater. 2001;45(4):391–397. doi: 10.1016/S1359-6462(01)01016-8
   Web of Science ®Google Scholar
• Zhu C, Xiong X, Cerezo A, et al. Three-dimensional atom probe characterization of alloy element partitioning in cementite during tempering of alloy steel. Ultramicroscopy. 2007;107(9):808–812. doi: 10.1016/j.ultramic.2007.02.033
   PubMed Web of Science ®Google Scholar
• Ridley N, Malik M, Lorimer G. Partitioning and pearlite growth kinetics in an Ni· Cr eutectoid steel. Mater Charact. 1990;25(1):125–141. doi: 10.1016/1044-5803(90)90025-F
   Web of Science ®Google Scholar
• Chance J, Ridley N. Chromium partitioning during isothermal transformation of a eutectoid steel. Metall Trans A. 1981;12(7):1205–1213. doi: 10.1007/BF02642334
   Web of Science ®Google Scholar
• Ande CK, Sluiter MH. First-principles prediction of partitioning of alloying elements between cementite and ferrite. Acta Mater. 2010;58(19):6276–6281. doi: 10.1016/j.actamat.2010.07.049
   Web of Science ®Google Scholar
• Thomson R, Miller M. Carbide precipitation in martensite during the early stages of tempering Cr- and Mo-containing low alloy steels. Acta Mater. 1998;46(6):2203–2213. doi: 10.1016/S1359-6454(97)00420-5
   Web of Science ®Google Scholar
• Miyamoto G, Oh J, Hono K, et al. Effect of partitioning of Mn and Si on the growth kinetics of cementite in tempered Fe–0.6 mass% C martensite. Acta Mater. 2007;55(15):5027–5038. doi: 10.1016/j.actamat.2007.05.023
   Web of Science ®Google Scholar
• Lis J, Morgiel J, Lis A. The effect of Mn partitioning in Fe–Mn–Si alloy investigated with STEM-EDS techniques. Mater Chem Phys. 2003;81(2):466–468. doi: 10.1016/S0254-0584(03)00053-1
   Web of Science ®Google Scholar
• Al-Salman S, Lorimer G, Ridley N. Partitioning of silicon during pearlite growth in a eutectoid steel. Acta Metall. 1979;27(8):1391–1400. doi: 10.1016/0001-6160(79)90208-6
   Google Scholar
• Shein I, Medvedeva N, Ivanovskii A. Electronic and structural properties of cementite-type M3X (M=Fe, Co, Ni; X=C or B) by first principles calculations. Phys B. 2006;371(1):126–132. doi: 10.1016/j.physb.2005.10.093
   Web of Science ®Google Scholar
• Tu YY, Mao ZG, Zhang Q, et al. Atomistic interaction between silicon and manganese in pearlitic steel: combined atom probe tomography and first-principle calculations. Mater Lett. 2014;134:84–86. doi: 10.1016/j.matlet.2014.07.057
   Web of Science ®Google Scholar
• Tu YY, Huang LH, Wang XH, et al. Effect of Si and Mn interactions on the spheroidization and coarsening behavior of cementite during annealing in severe cold-drawn pearlitic steel. Metall Mater Trans A – Phys Metall Mater Sci. 2016;47A:254–259. doi: 10.1007/s11661-015-3219-3
   Web of Science ®Google Scholar
• Takahashi J, Tarui T, Kawakami K. Three-dimensional atom probe analysis of heavily drawn steel wires by probing perpendicular to the pearlitic lamellae. Ultramicroscopy. 2009;109(2):193–199. doi: 10.1016/j.ultramic.2008.10.013
   PubMed Web of Science ®Google Scholar
• Li Y, Choi P, Borchers C, et al. Atom probe tomography characterization of heavily cold drawn pearlitic steel wire. Ultramicroscopy. 2011;111(6):628–632. doi: 10.1016/j.ultramic.2010.11.010
   PubMed Web of Science ®Google Scholar
• Hellman OC, Vandenbroucke JA, Rusing J, et al. Analysis of three- dimensional atom-probe data by the proximity histogram. Microsc Microanal. 2000;6(5):437–444.
   PubMed Web of Science ®Google Scholar
• Embury JD, Fisher RM. Structure and properties of drawn pearlite. Acta Metall Mater. 1966;14(2):147–151. doi: 10.1016/0001-6160(66)90296-3
   Google Scholar
• Tewari SK, Sharma RC. The effect of alloying elements on pearlite growth. Metall Mater Trans A – Phys Metall Mater Sci. 1985;16(4):597–603. doi: 10.1007/BF02814233
   Web of Science ®Google Scholar
• Mao Z, Booth-Morrison C, Sudbrack CK, et al. Kinetic pathways for phase separation: An atomic-scale study in Ni–Al–Cr alloys. Acta Mater. 2012;60(4):1871–1888. doi: 10.1016/j.actamat.2011.10.046
   Web of Science ®Google Scholar