Effect of vanadium on microstructure and mechanical properties of Fe–1.8Ni–0.5Mo–2Cu–0.45C PM steel

References

• Narasimhan KS. Sintering of powder mixtures and the growth of ferrous powder metallurgy. Macromol Chem Phys. 2001;67(1):56–65.
   Google Scholar
• Danninger H, Gierl-Mayer C. Advances in powder metallurgy. 1st ed. London: Woodhead; 2003. Chapter 7, Advanced powder metallurgy steel alloys; p. 149–201.
   Google Scholar
• Liu ZL, Liu XQ, Jiang XD, et al. Investigation on the Fe-based PM materials reinforced by in situ synthesized TiC particulates. Part Sci Technol. 2017;35:653–659. doi: 10.1080/02726351.2016.1192573
   Web of Science ®Google Scholar
• Shanmugam S, Tanniru M, Misra RDK, et al. Precipitation in V bearing microalloyed steel containing low concentrations of Ti and Nb. Mater Sci Technol. 2005;21(8):883–892. doi: 10.1179/174328405X47564
   Web of Science ®Google Scholar
• Erden MA, Gündüz S, Türkmen M, et al. Microstructural characterization and mechanical properties of microalloyed powder metallurgy steels. Mater Sci Eng A. 2014;616(3):201–206. doi: 10.1016/j.msea.2014.08.026
   Google Scholar
• Chen MY, Yen HW, Yang JR. The transition from interphase-precipitated carbides to fibrous carbides in a vanadium-containing medium-carbon steel. Scr Mater. 2013;68(11):829–832. doi: 10.1016/j.scriptamat.2013.01.020
   Web of Science ®Google Scholar
• Dunlop GL, Carlsson CJ, Frimodig G. Precipitation of VC in ferrite and pearlite during direct transformation of a medium carbon microalloyed steel. Metall Trans A. 1978;9(2):261–266. doi: 10.1007/BF02646709
   Web of Science ®Google Scholar
• Miyamoto G, Hori R, Poorganji B, et al. Interphase precipitation of VC and resultant hardening in V-added medium carbon steels. ISIJ Int. 2011;51(10):1733–1739. doi: 10.2355/isijinternational.51.1733
   Web of Science ®Google Scholar
• Cochrane RC. 6 – Phase transformations in microalloyed high strength low alloy (HSLA) steels. Phase Transformations in Steels: Diffusionless Transformations, High Strength Steels, Modelling and Advanced Analytical Techniques. 2012;66(5):153–212.
   Google Scholar
• Shanmugam S, Tanniru M, Misra RDK, et al. Microalloyed V–Nb–Ti and V steels part 2 – precipitation behaviour during processing of structural beams. Mater Sci Technol. 2005;21(2):165–177. doi: 10.1179/174328405X18656
   Web of Science ®Google Scholar
• Schade C, Murphy T, Lawley A, et al. Microstructure and mechanical properties of microalloyed PM steels. Int J Powder Metall. 2012;48(3):1–4.
   Web of Science ®Google Scholar
• Baker TN. Processes, microstructure and properties of vanadium microalloyed steels. Mater Sci Technol. 2014;25(9):1083–1107. doi: 10.1179/174328409X453253
   Google Scholar
• Schade C, Murphy T, Lawley A, et al. Microstructure and mechanical properties of PM steels alloyed with silicon and vanadium. Int J Powder Metall. 2012;48(6):41–48.
   Web of Science ®Google Scholar
• Im YR, Oh YJ, Lee BJ, et al. Effects of carbide precipitation on the strength and Charpy impact properties of low carbon Mn–Ni–Mo bainitic steels. J Nucl Mater. 2001;297(2):138–148. doi: 10.1016/S0022-3115(01)00610-9
   Web of Science ®Google Scholar
• Kong J, Xie C. Effect of molybdenum on continuous cooling bainite transformation of low-carbon microalloyed steel. Mater Des. 2006;27(10):1169–1173. doi: 10.1016/j.matdes.2005.02.006
   Web of Science ®Google Scholar
• Andrés CGD, Capdevila C, Caballero FG, et al. Effect of molybdenum on continuous cooling transformations in two medium carbon forging steels. J Mater Sci. 2001;36(3):565–571. doi: 10.1023/A:1004895715744
   Web of Science ®Google Scholar
• Srijampan W, Wiengmoon A, Morakotjinda M, et al. Microstructure and mechanical property of sintered Fe-Cr-Mo steels due to phase transformations with fast cooling rates. Mater Des. 2015;88:693–701. doi: 10.1016/j.matdes.2015.09.030
   Web of Science ®Google Scholar
• Qiao ZX, Liu C, Yu LM, et al. Formation mechanism of granular bainite in a 30CrNi3MoV steel. J Alloys Compd. 2012;475(1):560–564.
   Google Scholar
• Fadel A, Gliŝić D, Radović N, et al. Influence of Cr, Mn and Mo addition on structure and properties of V microalloyed medium carbon steels. J Mater Sci Technol. 2012;28(11):1053–1058. doi: 10.1016/S1005-0302(12)60172-8
   Web of Science ®Google Scholar
• Clayton P, Jin N. Unlubricated sliding and rolling/slid-ing wear behavior of continuously cooled, low/medium carbon bainitic steels. Wear. 1996;200(1-2):74–82. doi: 10.1016/S0043-1648(96)07249-3
   Web of Science ®Google Scholar
• Yang TG, Wang YS, Cheng FJ. In situ synthesizing of Fe-V (C, N) composite. Iron Steel Vanadium Titanium. 2007;28(1):26–28.
   Google Scholar
• Zhang SP. Synthesis of VN-reinforced iron-based composite. Adv Mater Res. 2012;557-559:240–243. doi: 10.4028/www.scientific.net/AMR.557-559.240
   Google Scholar
• Shi J, Wang Y, Ding Y, et al. Sintering of V (C, N) particulates reinforced iron matrix composite produced by nitriding reaction. Hot Work Technol. 2006;35(2):27–30.
   Google Scholar
• Erden MA. The effect of the sintering temperature and addition of niobium and vanadium on the microstructure and mechanical properties of microalloyed PM steels. Metals. 2017;7(9):329. doi: 10.3390/met7090329
   Web of Science ®Google Scholar
• Ishikawa F, Takahashi T, Ochi T. Intragranular ferrite nucleation in medium-carbon vanadium steels. Metall Mater Trans A. 1994;25(5):929–936. doi: 10.1007/BF02652268
   Web of Science ®Google Scholar
• Ollilainen V, Kasprzak W, Holappa L. The effect of silicon, vanadium and nitrogen on the microstructure and hardness of air cooled medium carbon low alloy steels. J Mater Process Technol. 2003;134(3):405–412. doi: 10.1016/S0924-0136(02)01131-7
   Web of Science ®Google Scholar
• Upadhyaya RGS. Effect of copper and VCN additions on sintering of low alloy steel. Mater Des. 2001;22(5):359–367. doi: 10.1016/S0261-3069(00)00104-7
   Web of Science ®Google Scholar
• Zhou SS, Liu XQ, Liu ZL, et al. Dynamic recrystallization behavior of vanadium microalloyed cryogenic fine grain structural steel pipe at high strain rate. High Temp Mater Proc. 2017;36(10):1001–1010. doi: 10.1515/htmp-2016-0063
   Web of Science ®Google Scholar
• Ceschini L, Marconi A, Martini C, et al. Tensile and impact behaviour of a microalloyed medium carbon steel: effect of the cooling condition and corresponding microstructure. Mater Des. 2013;45:171–178. doi: 10.1016/j.matdes.2012.08.063
   Web of Science ®Google Scholar
• Skoblo TS, Sapozhkov VE, Levchenko NF, et al. Effect of initial-carbide morphology on the structure and properties of high-strength rail steels after quenching from induction heating. Met Sci Heat Treat. 1989;31(5):325–330. doi: 10.1007/BF00801654
   Web of Science ®Google Scholar
• Ramalho A, Miranda JC. The relationship between wear and dissipated energy in sliding systems. Wear. 2006;260(4):361–367. doi: 10.1016/j.wear.2005.02.121
   Web of Science ®Google Scholar