References
- Li Z, Xu Z, Zhang L, et al. Friction spot welding of dissimilar 6063/5083 aluminium alloys. Mater Sci Technol. 2017;33(14):1626–1634. doi: 10.1080/02670836.2017.1303563
- Stern A, Aizenshtein M. Magnetic pulse welding of Al to Mg alloys: structural–mechanical properties of the interfacial layer. Mater Sci Technol. 2011;27(12):1809–1813. doi: 10.1179/1743284710Y.0000000043
- Zhao Y, Huang L, Zhao Z, et al. Effect of travel speed on the microstructure of Al-to-Mg FSW joints. Mater Sci Technol. 2016;32(10):1025–1034. doi: 10.1080/02670836.2015.1110281
- Zhang N, Wang W, Cao X, et al. The effect of annealing on the interface microstructure and mechanical characteristics of AZ31B/AA6061 composite plates fabricated by explosive welding. Mater Des. 2015;65:1100–1109. doi: 10.1016/j.matdes.2014.08.025
- Fu B, Qin G, Li F, et al. Friction stir welding process of dissimilar metals of 6061-T6 aluminum alloy to AZ31B magnesium alloy. J Mater Process Technol. 2015;218:38–47. doi: 10.1016/j.jmatprotec.2014.11.039
- Jafarian M, Rizi M, Jafarian M, et al. Effect of thermal tempering on microstructure and mechanical properties of Mg-AZ31/Al-6061diffusion bonding. Mater Sci Eng A. 2016;666:372–379. doi: 10.1016/j.msea.2016.04.011
- Dietrich D, Nickel D, Krause M, et al. Formation of intermetallic phases in diffusion-welded joints of aluminium and magnesium alloys. J Mater Sci. 2011;46:357–364. doi: 10.1007/s10853-010-4841-5
- Jafarian M, Khodabandeh A, Manafi S. Evaluation of diffusion welding of 6061 aluminum and AZ31 magnesium alloys without using an interlayer. Mater Des. 2015;65:160–164. doi: 10.1016/j.matdes.2014.09.020
- Chang H, Zheng M, Xu C, et al. Microstructure and mechanical properties of the Mg/Al multilayer fabricated by accumulative roll bonding (ARB) at ambient temperature. Mater Sci Eng A. 2012;543:249–256. doi: 10.1016/j.msea.2012.02.083
- Zhang X, Castagne S, Yang T, et al. Entrance analysis of 7075 Al/Mg–Gd–Y–Zr/7075 Al laminated composite prepared by hot rolling and its mechanical properties. Mater Des. 2011;32:1152–1158. doi: 10.1016/j.matdes.2010.10.030
- Kim E, Cho J, Kim H, et al. Evolution of deformation texture in Al/Al–Mg/Al composite sheets during cold-roll cladding. Mater Sci Eng A. 2011;530:244–252. doi: 10.1016/j.msea.2011.09.082
- Mahmoodkhani Y, Wells M. Co-extrusion process to produce Al–Mg eutectic clad magnesium products at elevated temperatures. J Mater Process Technol. 2016;232:175–183. doi: 10.1016/j.jmatprotec.2016.01.034
- Feuerhack A, Binotsch C, Wolff A, et al. A numerical criterion for quality prediction of bimetal strands. J Mater Process Technol. 2014;214:183–189. doi: 10.1016/j.jmatprotec.2013.08.019
- Xu G, Luo A, Chen Y, et al. Interfacial phenomena in magnesium/aluminium bi-metallic castings. Mater Sci Eng A. 2014;595:154–158. doi: 10.1016/j.msea.2013.11.093
- Hajjari E, Divandari M, Razavi S, et al. Dissimilar joining of Al/Mg light metals by compound casting process. J Mater Sci. 2011;46:6491–6499. doi: 10.1007/s10853-011-5595-4
- Liu L, Zhao L, Wu Z. Influence of holding time on microstructure and shear strength of Mg–Al alloys joint diffusion bonded with Zn–5Al interlayer. Mater Sci Technol. 2011;27(9):1372–1376. doi: 10.1179/026708310X12699498462887
- Zhao L, Zhang Z. Effect of Zn alloy interlayer on interface microstructure and strength of diffusion-bonded Mg–Al joints. Scr Mater. 2008;58:283–286. doi: 10.1016/j.scriptamat.2007.10.006
- Dai X, Zhang H, Zhang H, et al. Joining of magnesium and aluminum via arc-assisted ultrasonic seam welding with Sn/Zn composite interlayer. Mater Lett. 2016;178:235–238. doi: 10.1016/j.matlet.2016.04.064
- Gao M, Mei S, Li X, et al. Characterization and formation mechanism of laser welded Mg and Al alloys using Ti interlayer. Scr Mater. 2012;67:193–196. doi: 10.1016/j.scriptamat.2012.04.015
- Wang Y, Luo G, Zhang J, et al. Microstructure and mechanical properties of diffusion-bonded Mg–Al joints using silver film as interlayer. Mater Sci Eng A. 2013;559:868–874. doi: 10.1016/j.msea.2012.09.035
- Liu L, Liu X, Liu S. Microstructure of laser-TIG hybrid welds of dissimilar Mg alloy and Al alloy with Ce as interlayer. Scr Mater. 2006;55:383–386. doi: 10.1016/j.scriptamat.2006.04.025
- Qi X, Liu L. Fusion welding of Fe-added lap joints between AZ31B magnesium alloy and 6061 aluminum alloy by hybrid laser–tungsten inert gas welding technique. Mater Des. 2012;33:436–443. doi: 10.1016/j.matdes.2011.04.046
- Wang H, Liu L, Liu F. The characterization investigation of laser-arc-adhesive hybrid welding of Mg to Al joint using Ni interlayer. Mater Des. 2013;50:463–466. doi: 10.1016/j.matdes.2013.02.085
- Penner P, Liu L, Gerlich A, et al. Feasibility study of resistance spot welding of dissimilar Al Mg combinations with Ni based interlayers. Sci Technol Weld Joi. 2013;18(7):541–550. doi: 10.1179/1362171813Y.0000000129
- Sun M, Niknejad S, Zhang G, et al. Microstructure and mechanical properties of resistance spot welded AZ31/AA5754 using a nickel interlayer. Mater Des. 2015;87:905–913. doi: 10.1016/j.matdes.2015.08.097
- Chang W, Rajesh S, Chun C, et al. Microstructure and mechanical properties of hybrid laser-friction stir welding between AA6061-T6 Al alloy and AZ31 Mg alloy. J Mater Sci Technol. 2011;27(3):199–204. doi: 10.1016/S1005-0302(11)60049-2
- Zhang J, Luo G, Wang Y, et al. An investigation on diffusion bonding of aluminum and magnesium using a Ni interlayer. Mater Lett. 2012;83:189–191. doi: 10.1016/j.matlet.2012.06.014
- Jie J, Zhao J, Chen H, et al. Effect of Ni-based conversion coating and Ni–P electroless plating on the bonding process of pure Al and AZ31 alloy. Int J Mater Res. 2014;105:462–468. doi: 10.3139/146.111046
- Gill B, Tucker R. Plasma spray coating processes. Mater Sci Technol. 1986;2(3):207–213. doi: 10.1179/mst.1986.2.3.207
- Mrdak M, Vencl A, Nedeljkovic B, et al. Influence of plasma spraying parameters on properties of thermal barrier coatings. Mater Sci Technol. 2013;29(5):559–567. doi: 10.1179/1743284712Y.0000000193
- Liu CM, Zhu XR, Zhou HT. Phase diagrams of Mg alloy. Changsha: Central South University Press; 2006.
- Liu W, Long L, Ma Y, et al. Microstructure evolution and mechanical properties of Mg/Al diffusion bonded joints. J Alloy Compd. 2015;643:34–39. doi: 10.1016/j.jallcom.2015.04.116
- Brennan S, Bermudez K, Kulkarni N, et al. Interdiffusion in the Mg-Al system and intrinsic diffusion in β-Mg2Al3. Metall Mater Trans A. 2012;43:4043–4052. doi: 10.1007/s11661-012-1248-8
- Shang J, Wang K, Zhou Q, et al. Effect of joining temperature on microstructure and properties of diffusion bonded Mg/Al joints. Trans Nonferrous Met Soc China. 2012;22:1961–1966. doi: 10.1016/S1003-6326(11)61414-3
- Liu P, Li Y, Geng H, et al. A study of phase constitution near the interface of Mg/Al vacuum diffusion bonding. Mater Lett. 2005;59:2001–2005. doi: 10.1016/j.matlet.2005.02.038
- Nasiri AM, Chartrand P, Weckman DC, et al. Thermochemical analysis of phases formed at the interface of a Mg alloy–Ni-plated steel joint during laser brazing. Metall Mater Trans A. 2012;44:1937–1946. doi: 10.1007/s11661-012-1520-y