Critical review of automotive hot-stamped sheet steel from an industrial perspective

References

• Zammit JP, McGhee MJ, Shayler PJ, et al. Benefits of cylinder deactivation on a diesel engine and restrictions due to low boost, Internal Combustion Engines: performance, fuel economy and emissions. IMechE, London; 2013 Nov 27–28. p. 95–108.
   Google Scholar
• Granovskii M, Dincer I, Rosen MA. Economic and environmental comparison of conventional, hybrid, electric and hydrogen fuel cell vehicles. J Power Sources. 2006;159(2):1186–1193. doi: 10.1016/j.jpowsour.2005.11.086
   Web of Science ®Google Scholar
• Juhala M. 14 – Improving vehicle rolling resistance and aerodynamics. Alternative fuels and advanced vehicle technologies for improved environmental performance: towards zero carbon transportation; 2014, p. 462–475.
   Google Scholar
• Kiani M, Gandikota I, Rais-Rohani M, et al. Design of lightweight magnesium car body structure under crash and vibration constraints. J Magnesium Alloys. 2014;2(2):99–108. doi: 10.1016/j.jma.2014.05.005
   Google Scholar
• Van Ratingen M, Williams A, Lie A, et al. The European new car assessment programme: a historical review. Chin J Traumatol. 2016;19(2):63–69. doi: 10.1016/j.cjtee.2015.11.016
   PubMed Web of Science ®Google Scholar
• Clough A. The cost of CO2 reduction, managing the cost of technology. University of Warwick, Coventry; 2009 July 21 (presentation).
   Google Scholar
• Berglund G. The history of hardening of boron steel in northern Sweden. 1st International Conference on Hot Sheet Metal Forming of High-Performance Steel, CHS2, Kassel; 2008 Oct 22–24. p. 175–177.
   Google Scholar
• Ridderstrale CE, Norrbottens Järnverk AB. Manufacturing a hardened steel article. UK patent GB 1490535-A, Sweden, filed 1974, published 1977.
   Google Scholar
• Behrens BA. Hot stamping. In: CIRP, Laperriere Luc, Reinhart Gunther, editors. CIRP Encyclopedia of Production Engineering. Berlin: Springer; 2014. p. 1–7.
   Google Scholar
• US Department of Transportation, National Highway Traffic Safety Administration, Laboratory test procedure for FMVSS 214S (static) side impact protection, TP-214S-05; 1992 Apr 15.
   Google Scholar
• Aspacher J. Forming hardening concepts. 1st International Conference on Hot Sheet Metal Forming of High-Performance Steel, CHS2, Kassel; 2008 Oct 22–24. p. 77–81.
   Google Scholar
• Steinhoff K. From spades to functionally graded automotive components, compact training on hot stamping technology. 2nd GM PHS Suppliers Forum, GM, Troy (MI); 2014. p. 7–32.
   Google Scholar
• Karbasian H, Tekkaya AE. A review on hot stamping. J Mater Process Technol. 2010;210(15):2103–2118. doi: 10.1016/j.jmatprotec.2010.07.019
   Web of Science ®Google Scholar
• Belanger P. Steel innovations in hot stamping. Great Designs in Steel 2016, Steel Market Development Institute, Michigan; 2016 May 11, presentation, 2016.
   Google Scholar
• Hund R. Continuous improvement of hot forming technology. 3rd International Conference on Hot Sheet Metal Forming of High-Performance Steel, CHS2, Kassel; 13–17 July 2011. p. 189–200.
   Google Scholar
• Fan D, Kim H, Birosca S, et al. Critical review of hot stamping technology for automotive steels. Materials Science & Technology Conference and Exhibition 2007, Materials Science and Technology, Detroit (MI); 2007 Sep 16–20. p. 99–110.
   Google Scholar
• Fan DW, Kim HS, De Cooman BC. A review of the physical metallurgy related to the hot press forming of advanced high strength steel. Steel Res Int. 2009;80:241–248.
   Web of Science ®Google Scholar
• Mori K, Bariani PF, Behrens BA, et al. Hot stamping of ultra-high strength steel parts. CIRP Ann Manuf Technol. 2017;66(2):755–777. doi: 10.1016/j.cirp.2017.05.007
   Web of Science ®Google Scholar
• Fan D, De Cooman B. State-of-the-knowledge on coating systems for hot stamped parts. Steel Res Int. 2012;83(5):412–433. doi: 10.1002/srin.201100292
   Web of Science ®Google Scholar
• Merklein M, Wieland M, Lechner M, et al. Hot stamping of boron steel sheets with tailored properties: a review. J Mater Process Technol. 2016;228:11–24. doi: 10.1016/j.jmatprotec.2015.09.023
   Web of Science ®Google Scholar
• Nikravesh M, Naderi M, Akbari GH, et al. Phase transformations in a simulated hot stamping process of the boron bearing steel. Mater Des. 2015;84:18–24. doi: 10.1016/j.matdes.2015.06.108
   Web of Science ®Google Scholar
• Taylor T, Fourlaris G, Evans P. New generation ultrahigh strength steels for automotive hot stamping technologies. Asia Steel International Conference 2015, Iron and Steel Institute of Japan, Yokohama; 2015 Oct 5–8. p. 362–363.
   Google Scholar
• Hwang B, Suh D, Kim S. Austenitizing temperature and hardenability of low-carbon boron steels. Scr Mater. 2011;64(12):1118–1120. doi: 10.1016/j.scriptamat.2011.03.003
   Web of Science ®Google Scholar
• Rheingans B, Mittemeijer EJ. Modelling precipitation kinetics: evaluation of the thermodynamics of nucleation and growth. Calphad. 2015;50:49–58. doi: 10.1016/j.calphad.2015.04.013
   Web of Science ®Google Scholar
• Li Y, Ponge D, Choi P, et al. Segregation of boron at prior austenite grain boundaries in a quenched martensitic steel studied by atom probe tomography. Scr Mater. 2015;96:13–16. doi: 10.1016/j.scriptamat.2014.09.031
   Web of Science ®Google Scholar
• GM Worldwide Engineering Standards, GME Specification Center, Material Specification, Pre-Coated or Uncoated Low Carbon Heat-Treatable Boron Steel, GMW14400; 2011 Jan.
   Google Scholar
• Renault Automobiles Standardisation, RE-DS/Depa-rtment 67210, Product Specifications, Rolled Products Coated Steel for Hot Stamping, 11-04-822/-C; 2010 Oct.
   Google Scholar
• Volkswagen AG: Warmumformung Tunnelblech. Vol-kswagen Media Services; 2015.
   Google Scholar
• Cui J, Sun G, Xu J, et al. A method to evaluate the formability of high-strength steel in hot stamping. Mater Des. 2015;77:95–109. doi: 10.1016/j.matdes.2015.04.009
   Web of Science ®Google Scholar
• Skoda: Skoda rapid, EuroCarBody 2012, 14th Global Car Body Benchmarking Conference, Automotive Circle International, Bad Nauheim; 2012 Oct 16–18, presentation, 2012.
   Google Scholar
• ThyssenKrupp AG. Weight reduction thanks to hot- and cold-formed B-pillars. Springer Automotive Media. 2014;19(10):102–104.
   Google Scholar
• Billur E. Press hardening overview. AP&T Future Forming Seminar, AP&T, Shanghai; 2014 Apr 10, presentation, 2014.
   Google Scholar
• Taylor T, McCulloch J. Influence of part/die boundary conditions on microstructural evolution during hot stamping 2000 MPa class boron steel. Steel Research International; 2017.
   Google Scholar
• Yanagimoto J, Oyamada K, Nakagawa T. Springback of high-strength steel after hot and warm sheet formings. CIRP Ann Manuf Technol. 2005;54(1):213–216. doi: 10.1016/S0007-8506(07)60086-9
   Web of Science ®Google Scholar
• Yanagimoto J, Oyamada K. Mechanism of springback-free bending of high-strength steel sheets under warm forming conditions. CIRP Ann Manuf Technol. 2007;56(1):265–268. doi: 10.1016/j.cirp.2007.05.099
   Web of Science ®Google Scholar
• Kusumi K, Yamamoto S, Takeshita T, et al. The effect of martensitic transformation on the spring-back behavior of the hot stamping. 2nd International Conference on Hot Sheet Metal Forming of High-Performance Steel, CHS2, Luleå; 2009 June 15–17. p. 97–104.
   Google Scholar
• Taylor T. Novel cold-rolled martensitic ultra-high-strength steels for roll forming technologies. Mater Sci Technol. 2016;32(16):1730–1741. doi: 10.1080/02670836.2016.1146840
   Web of Science ®Google Scholar
• Hidaka K, Takemoto Y, Senuma T. Microstructural evolution of carbon steels in hot stamping processes. ISIJ Int. 2012;52(4):688–696. doi: 10.2355/isijinternational.52.688
   Web of Science ®Google Scholar
• Li N, Lin J, Balint DS, et al. Experimental characterisation of the effects of thermal conditions on austenite formation for hot stamping of boron steel. J Mater Process Technol. 2016;231:254–264. doi: 10.1016/j.jmatprotec.2015.12.008
   Web of Science ®Google Scholar
• Lenze FJ, Sikora S, Banik J, et al. Hot forming – new potentials for innovative manufacturing. J Steel Related Mater. 2009;7(6):427–432.
   Google Scholar
• Taylor T, Fourlaris G, Evans P, et al. New generation ultrahigh strength boron steel for automotive hot stamping technologies. Mater Sci Technol. 2014;30(7):818–826. doi: 10.1179/1743284713Y.0000000409
   Web of Science ®Google Scholar
• Turetta A, Bruschi S, Ghiotti A. Investigation of 22MnB5 formability in hot stamping operations. J Mater Process Technol. 2006;177:396–400. doi: 10.1016/j.jmatprotec.2006.04.041
   Web of Science ®Google Scholar
• Li N, Sun C, Guo N, et al. Experimental investigation of boron steel at hot stamping conditions. J Mater Process Technol. 2016;228:2–10. doi: 10.1016/j.jmatprotec.2015.09.043
   Web of Science ®Google Scholar
• British Standards Institution, Metallic materials. Tensile testing. Method of test at room temperature, BS EN ISO 6892-1:2016; July 2016.
   Google Scholar
• Tungtrongpairoj J, Uthaisangsuk V, Bleck W. Determination of yield behaviour of boron alloy steel at high temperature. J Met Mater Miner. 2009;19(1):29–38.
   Google Scholar
• Merklein M, Lechler J. Investigation of the thermo-mechanical properties of hot stamping steels. J Mater Process Technol. 2006;177:452–455. doi: 10.1016/j.jmatprotec.2006.03.233
   Web of Science ®Google Scholar
• Chang Y, Wang C, Zhao K, et al. An introduction to medium-Mn steel: metallurgy, mechanical properties and warm stamping process. Mater Des. 2016;94:424–432. doi: 10.1016/j.matdes.2016.01.048
   Web of Science ®Google Scholar
• Abspoel M, Neelis BM, van Liempt P. Constitutive behaviour under hot stamping conditions. J Mater Process Technol. 2016;228:34–42. doi: 10.1016/j.jmatprotec.2015.05.007
   Web of Science ®Google Scholar
• Taylor T. New generation advanced high strength steels for automotive hot stamping technologies [doctorate thesis]. Swansea: Swansea University; 2014.
   Google Scholar
• Naderi M, Ketabchi M, Abbasi M, et al. Analysis of microstructure and mechanical properties of different boron and non-boron alloyed steels after being hot stamped. Procedia Eng. 2011;10:460–465. doi: 10.1016/j.proeng.2011.04.078
   Google Scholar
• Nikravesh M, Naderi M, Akbari GH. Influence of hot plastic deformation and cooling rate on martensite and bainite start temperatures in 22MnB5 steel. Mater Sci Eng A. 2012;540:24–29. doi: 10.1016/j.msea.2012.01.018
   Web of Science ®Google Scholar
• Wang B, Liu X, Wang G. Effect of deformation of austenite and cooling rates on transformation microstructures in a Mn–Cr gear steel. Mater Des. 2009;30:2198–2204. doi: 10.1016/j.matdes.2008.08.021
   Web of Science ®Google Scholar
• Wang B, Jiang Y, Xu X, et al. Effect of austenite deformation on continuous cooling transformation microstructures for 22CrSH gear steel. J Iron Steel Res Int. 2007;14(1):69–73. doi: 10.1016/S1006-706X(07)60015-6
   Web of Science ®Google Scholar
• Li H, He L, Zhang C, et al. Research on the effect of boundary pressure on the boundary heat transfer coefficients between hot stamping die and boron steel. Int J Heat Mass Transf. 2015;91:401–415. doi: 10.1016/j.ijheatmasstransfer.2015.07.102
   Web of Science ®Google Scholar
• Gu Z, Lu M, Lu G, et al. Effect of contact pressure during quenching on microstructures and mechanical properties of hot-stamping parts. J Iron Steel Res Int. 2015;22(12):1138–1143. doi: 10.1016/S1006-706X(15)30124-2
   Web of Science ®Google Scholar
• Chang Y, Tang X, Zhao K, et al. Investigation of the factors influencing the interfacial heat transfer coefficient in hot stamping. J Mater Process Technol. 2016;228:25–33. doi: 10.1016/j.jmatprotec.2014.10.008
   Web of Science ®Google Scholar
• Hoffmann H, So H, Steinbeiss H. Design of hot stamping tools with cooling system. CIRP Ann Manuf Technol. 2007;56(1):269–272. doi: 10.1016/j.cirp.2007.05.062
   Web of Science ®Google Scholar
• He B, Ying L, Li X, et al. Optimal design of longitudinal conformal cooling channels in hot stamping tools. Appl Therm Eng. 2016;106:1176–1189. doi: 10.1016/j.applthermaleng.2016.06.113
   Web of Science ®Google Scholar
• Hu P, He B, Ying L. Numerical investigation on cooling performance of hot stamping tool with various channel designs. Appl Therm Eng. 2016;96:338–351. doi: 10.1016/j.applthermaleng.2015.10.154
   Web of Science ®Google Scholar
• Bernquist J. Safety Cage Design in the Volvo XC90. Great Designs in Steel 2004. Steel Market Development Institute, Michigan; 2004 Feb 18, presentation, 2004.
   Google Scholar
• Lindberg H. Advanced high strength steel technologies in the 2016 Volvo XC90. Great Designs in Steel 2016, Steel Market Development Institute, Michigan; 2016 May 11, presentation, 2016.
   Google Scholar
• Barényi B, Daimler-Benz AG. Motor vehicles especially for the transportation of people. German patent DBP 854 157, filed 1951, published 1952.
   Google Scholar
• Tandon G, Viaux I. Lightweight door ring concepts using hot stamped laser welded blanks. Great Designs in Steel 2014, Steel Market Development Institute, Michigan; 2014 May 14, presentation, 2014.
   Google Scholar
• Zhu G, Zhou H, Li Q, et al. Newly designed Cr–Mn alloyed ultra-high strength steel without boron addition for hot-stamping processing. J Iron Steel Res Int. 2015;22(12):1144–1148. doi: 10.1016/S1006-706X(15)30125-4
   Web of Science ®Google Scholar
• Yi H, Ghosh S, Bhadeshia HKDH. Dual-phase hot-press forming alloy. Mater Sci Eng A. 2010;527:4870–4874. doi: 10.1016/j.msea.2010.04.022
   Web of Science ®Google Scholar
• Antunes R, Oliveira M. Materials selection for hot stamped automotive body parts: an application of the ashby approach based on the strain hardening exponent and stacking fault energy of materials. Mater Des. 2014;63:247–256. doi: 10.1016/j.matdes.2014.06.011
   Web of Science ®Google Scholar
• Han Q, Bi W, Jin X, et al. Low temperature hot forming of medium-Mn steel. 5th International Conference on Hot Sheet Metal Forming of High-Performance Steel, CHS2, Toronto; 2015 May 31–June 3. p. 381–390.
   Google Scholar
• Rana R, Carson CH, Speer JG. Hot forming response of medium manganese transformation induced plasticity steels. 5th International Conference on Hot Sheet Metal Forming of High-Performance Steel, CHS2, Toronto; 2015 May 31–June 3. p. 391–400.
   Google Scholar
• Yi H, Du P, Wang B. A new invention of press-hardened steel achieving 1880 MPa tensile strength combined with 16% elongation in hot-stamped parts. 5th International Conference on Hot Sheet Metal Forming of High-Performance Steel, CHS2, Toronto, 31 May–3 June 2015. p. 725–734.
   Google Scholar
• Taylor T, Fourlaris G, Evans P. Development of carbon-manganese-chromium steels for automotive hot stamping technologies. Mater Sci Technol. 2017; 33(4):487–496. doi: 10.1080/02670836.2016.1229882
   Web of Science ®Google Scholar
• Naderi M, Labudde T, Uthaisangsuk V, Bleck W. New ultrahigh strength steel grades for hot stamping. 2nd International Conference on Steels in Cars and Trucks, SCT, Wiesbaden; 2007 June 1–5. p. 154–163.
   Google Scholar
• Tokizawa A, Yamamoto K, Takemoto Y, et al. Development of 2000MPa class hot stamped steel components with good toughness and high resistance against delayed fracture. 4th International Conference on Hot Sheet Metal Forming of High-Performance Steel, CHS2, Luleå; 2013 June 9–12. p. 465–472.
   Google Scholar
• Taylor T, Fourlaris G, Clough A. Effect of carbon and microalloy additions on hot-stamped boron steel. Mater Sci Technol. 2017;33(16):1964–1977. doi: 10.1080/02670836.2017.1342018
   Web of Science ®Google Scholar
• Taylor T, Danks S, Fourlaris G. Dynamic tensile testing of ultrahigh strength hot stamped martensitic steels. Steel Res Int. 2017;88(3). Paper 1600144. doi: 10.1002/srin.201600144
   Web of Science ®Google Scholar
• Taylor T, Fourlaris G, Cafolla J. Finite element modelling full vehicle side impact with ultrahigh strength hot stamped steels. J Mater Eng Perform. 2016;25(10):4495–4505. doi: 10.1007/s11665-016-2285-z
   Web of Science ®Google Scholar
• Devroc J, Hennechart JP, Laurent JP, et al. Clad hot-rolled and cold-rolled steel sheet, presenting a very high resistance after thermal treatment. European patent EP 0971044 B1, France, filed 1998, accepted 1999.
   Google Scholar
• Drillet P, Spehner D, Kefferstein R, et al. Process for manufacturing stamped products, and stamped products prepared from the same. European patent EP 2242863 B1, filed 2008, accepted 2009.
   Google Scholar
• Allély C, Dosdat L, Clauzeau O, et al. Anticorrosion mechanisms of aluminized steel for hot stamping. Surf Coat Technol. 2014;238:188–196. doi: 10.1016/j.surfcoat.2013.10.072
   Web of Science ®Google Scholar
• Grauer SJ, Caron EJFR, Chester NL, et al. Investigation of melting in the Al-Si coating of a boron steel sheet by differential scanning calorimetry. J Mater Process Technol. 2015;216:89–94. doi: 10.1016/j.jmatprotec.2014.09.001
   Web of Science ®Google Scholar
• Stopp R, Schaller L, Lamprecht K, et al. Warmblechum-formung in der Automobil-Serienfertigung: status, trends und potenziale, Tagungsband 2. Erlanger Workshop Warmblechumformung, Erlangen; 2007. p. 23–36.
   Google Scholar
• Wang K, Gui Z, Liu P, et al. Cracking behavior of Al–Si coating on hot stamping boron steel. 11th International Conference on Technology of Plasticity, Nagoya; 19–24 Oct 2014. Procedia Eng. 2014;81:1713–1718.
   Google Scholar
• Kim HG, Beak ER, Kim TH, et al. Ultra high strength steel and its application for press hardening. 1st International Seminar on Hot Sheet Metal Forming of High Performance Steel, CHS2, Hanover; 28 October 2010, presentation, 2010.
   Google Scholar
• Schwartz R, Lehmann H. Developments in the field of heat treatment systems for hot-form hardening lines. 2nd International Conference on Hot Sheet Metal Forming of High Performance Steel, CHS2, Luleå; 2009 June 15–17. p. 323–330.
   Google Scholar
• Kurz T, Schwinghammer H, Luckeneder G, et al. Zinc coated press-hardening steel – challenges and solutions. 5th International Conference on Hot Sheet Metal Forming of High Performance Steel, CHS2, Toronto; 2015 May 31–June 3. p. 345–354.
   Google Scholar
• Kurz T, Larour P, Lackner J, et al. Press-hardening of zinc coated steel – characterization of a new material for a new process. Challenges in Forming High-Strength Steels, The Austrian Society for Metallurgy and Materials, Linz (Austria); 2016 June 12–15, p. 1–16.
   Google Scholar
• Figueroa-Gordon D, Harding T, Bohm S. Tata Steel: anti-scale and anti-corrosion coatings for steel substrates. International patent WO 2013/056848 A1, Netherlands, Filed 2012, published 2013.
   Google Scholar
• Hardell J, Kassfeldt E, Prakash B. Friction and wear behaviour of high strength boron steel at elevated temperatures of up to 800°C. Wear. 2008;264:788–799. doi: 10.1016/j.wear.2006.12.077
   Web of Science ®Google Scholar
• Yanagida A, Azushima A. Evaluation of coefficients of friction in hot stamping by hot flat drawing test. CIRP Ann Manuf Technol. 2009;58:247–250. doi: 10.1016/j.cirp.2009.03.091
   Web of Science ®Google Scholar
• Ghiotti A, Bruschi S, Medea F. Comparison of tribological and wear performances of AlSi and Zn coatings in hot stamping of boron steel sheets. 20th International Conference on Wear Materials, Wear, Toronto; 2015 Apr 12–16. p. 810–821.
   Google Scholar
• Azushima A, Uda K, Yanagida A. Friction behavior of aluminum-coated 22MnB5 in hot stamping under dry and lubricated conditions. J Mater Process Technol. 2012;212:1014–1021. doi: 10.1016/j.jmatprotec.2011.12.009
   Web of Science ®Google Scholar
• Uda K, Azushima A, Yanagida A. Development of new lubricants for hot stamping of Al-coated 22MnB5 steel. J Mater Process Technol. 2016;228:112–116. doi: 10.1016/j.jmatprotec.2015.10.033
   Web of Science ®Google Scholar
• Mori K, Ito D. Prevention of oxidation in hot stamping of quenchable steel sheet by oxidation preventive oil. CIRP Ann Manuf Technol. 2009;58(1):267–270. doi: 10.1016/j.cirp.2009.03.055
   Web of Science ®Google Scholar
• Lehmann H. Developments in the field of Schwartz heat treatment furnaces for press hardening industry. 3rd International Conference on Hot Sheet Metal Forming of High Performance Steel, CHS2, Kassel; 2011 July 13–17. p. 171–179.
   Google Scholar
• Mori K, Maki S, Tanaka Y. Warm and hot stamping of ultra high tensile strength steel sheets using resistance heating. CIRP Ann Manuf Technol. 2005;54(1):209–212. doi: 10.1016/S0007-8506(07)60085-7
   Web of Science ®Google Scholar
• Mori K. Smart hot stamping of ultra-high strength steel parts. Trans Nonferrous Met Soc China. 2012;22:s496–s503. doi: 10.1016/S1003-6326(12)61752-X
   Web of Science ®Google Scholar
• Liang W, Liu Y, Zhu B, et al. Conduction heating of boron alloyed steel in application for hot stamping. Int J Prec Eng Manuf. 2015;16(9):1983–1992. doi: 10.1007/s12541-015-0258-z
   Web of Science ®Google Scholar
• Mori K, Maeno T, Yamada H, et al. 1-Shot hot stamping of ultra-high strength steel parts consisting of resistance heating, forming, shearing and die quenching. Int J Mach Tools Manuf. 2015;89:124–131. doi: 10.1016/j.ijmachtools.2014.10.008
   Web of Science ®Google Scholar
• Toyota Motor Corporation: hot stamping process. Toyota Global Newsroom; 2017.
   Google Scholar
• Ikeuchi K, Yanagimoto J. Valuation method for effects of hot stamping process parameters on product properties using hot forming simulator. J Mater Process Technol. 2011;211:1441–1447. doi: 10.1016/j.jmatprotec.2011.03.017
   Web of Science ®Google Scholar
• Veit R, Kolleck R, Gasser C, et al. Development of a close-to production prototype of an induction heating device for hot stamping of boron alloyed steels. 3rd International Conference on Steels in Cars and Trucks, SCT, Salzburg; 2011 June 5–9. p. 83–90.
   Google Scholar
• Veit R, Hofmann H, Kolleck R, et al. Investigation of the phase formation of AlSi-coatings for hot stamping of boron alloyed steel, International Conference on Advances in Materials and Processing Technologies, CEMEF MINES ParisTech, Paris; 2010 Oct 24–27. p. 769–774.
   Google Scholar
• Wiberg S, Laumen C. Linde Aktiengesellschaft: meth-od for press hardening of metals. European patent EP 2088213 A1, filed 2008, published 2009.
   Google Scholar
• Clough AJ, McGregor LJ. Tata Steel: arrangement and method for heating and working sheet material. International patent WO 2014063807 A1, filed 2013, published 2014.
   Google Scholar
• Kolnberger S, Till E, Kurz T, et al. Voestalpine metal forming GmbH, Schuler Pressen GmbH: device and method for pre-cooling sheet steel bars. International patent WO 2015158568 A3, filed 2015, published 2015.
   Google Scholar
• Zhao K, Chang Y, Hu P, et al. Influence of rapid cooling pretreatment on microstructure and mechanical property of hot stamped AHSS part. J Mater Process Technol. 2016;228:68–75. doi: 10.1016/j.jmatprotec.2014.09.022
   Web of Science ®Google Scholar
• Lee MG, Kim SJ, Han HN, et al. Application of hot press forming process to manufacture an automotive part and its finite element analysis considering phase transformation plasticity. Int J Mech Sci. 2009;51(11–12):888–898. doi: 10.1016/j.ijmecsci.2009.09.030
   Web of Science ®Google Scholar
• Diekmann U, Sauberlich T, Frehn A, et al. Benteler Stahl GmbH: workpiece made of a high-strength steel alloy and its use. European patent EP 1881083 A1, filed 2007, published 2008.
   Google Scholar
• Mori K, Maeno T, Fuzisaka S. Punching of ultra-high strength steel sheets using local resistance heating of shearing zone. J Mater Process Technol. 2012;212:534–540. doi: 10.1016/j.jmatprotec.2011.10.021
   Web of Science ®Google Scholar
• Price G. Behaviour study, Industry 4.0 Special Supplement of Automotive Manufacturing Solutions; July 2017.
   Google Scholar
• Frings A, Prange W, Thyssen Stahl AG. Verfahren zum Herstellen eines Formkörpers aus Blechteilen unterschiedlicher Dicke. European patent EP 0279866 A1, filed 1986, published 1988.
   Google Scholar
• Ams W. Benteler Automobiltechnik GmbH: making e.g. vehicle structural components with wall thickness varied by rolling, shapes and hardens components through combination of heat- and mechanical treatments. German patent DE 10246164 A1, filed 2002, published 2004.
   Google Scholar
• Georgiadis G, Tekkaya AE, Weigert P, et al. Investigations on the manufacturability of thin press hardened steel components. Procedia CIRP. 2014;18:74–79. doi: 10.1016/j.procir.2014.06.110
   Google Scholar
• Lei C, Xing Z, Xu W, et al. Hot stamping of patchwork blanks: modelling and experimental investigation. Int J Adv Manuf Technol. 2017;92(5–8):2609–2617. doi: 10.1007/s00170-017-0351-9
   Web of Science ®Google Scholar
• Boke J, Krogmeier J, Reinhold P. Benteler Automobiltechnik GmbH: continuous furnace used in the production of vehicle components, e.g. B-columns, comprises two zones lying opposite each other and separated from each other by a thermal insulating separating wall. European patent EP 1426454 A1, filed 2002, published 2004.
   Google Scholar
• Mori K, Maeno T, Mongkolkaji K. Tailored die quenching of steel parts having strength distribution using bypass resistance heating in hot stamping. J Mater Process Technol. 2013;213(3):508–514. doi: 10.1016/j.jmatprotec.2012.10.005
   Web of Science ®Google Scholar
• Lenze FJ, Sikora S, Thyssenkrupp Steel AG. Vorrichtung und Verfahren zum Umformen von Platinen aus höher- und höchstfesten Stählen. German patent DE 102006019395 A1, filed 2006, published 2007.
   Google Scholar
• Casas B, Latre D, Rodriguez N, et al. Tailor made tool materials for the present and upcoming tooling solutions in hot sheet metal forming. 1st International Conference on Hot Sheet Metal Forming of High-Performance Steel, CHS2, Kassel; 2008 Oct 22–24. p. 23–35.
   Google Scholar
• Mori K, Okuda Y. Tailor die quenching in hot stamping for producing ultra-high strength steel formed parts having strength distribution. CIRP Ann Manuf Technol. 2010;59(1):291–294. doi: 10.1016/j.cirp.2010.03.107
   Web of Science ®Google Scholar
• Han X, Zhong Y, Yang K, et al. Application of hot stamping process by integrating quenching & partitioning heat treatment to improve mechanical properties. Procedia Eng. 2014;81:1737–1743. doi: 10.1016/j.proeng.2014.10.223
   Google Scholar
• Li N, Lin J, Dean TA, et al. Materials modelling for selective heating and press hardening of boron steel panels with graded microstructures. Procedia Eng. 2014;81:1675–1681. doi: 10.1016/j.proeng.2014.10.212
   Google Scholar
• Hu P, Shi D, Ying L, et al. The finite element analysis of ductile damage during hot stamping of 22MnB5 steel. Mater Des. 2015;69:141–152. doi: 10.1016/j.matdes.2014.12.044
   Web of Science ®Google Scholar
• Ganapathy M, Li N, Lin J, et al. Test-piece and test-rig designs to obtain high accuracy experimental data for boron steel at hot stamping conditions. 3rd International Conference on Advanced High Strength Steel and Press Hardening, ICHSU, Xi’an; 2016 Aug 25–27; 2017. p. 109–113.
   Google Scholar
• Quan G, Zhan Z, Zhang L, et al. A study on the multi-phase transformation kinetics of ultra-high-strength steel and application in thermal-mechanical-phase coupling simulation of hot stamping process. Mater Sci Eng A. 2016;673:24–38. doi: 10.1016/j.msea.2016.07.010
   Web of Science ®Google Scholar
• Hagenah H, Merklein M, Lechner M, et al. Determination of the mechanical properties of hot stamped parts from numerical simulations. Procedia CIRP. 2015;33:167–172. doi: 10.1016/j.procir.2015.06.031
   Google Scholar
• Li N, Lin J, Dean TA. Development of unified viscoplastic-damage model for crashworthiness analysis of boron steel safety components with tailored microstructures. Appl Mech Mater. 2015;784:427–434. doi: 10.4028/www.scientific.net/AMM.784.427
   Google Scholar
• Bhadeshia HKDH. TRIP-assisted steels? ISIJ Int. 2002;42(9):1059–1060. doi: 10.2355/isijinternational.42.1059
   Web of Science ®Google Scholar
• Bachmaier A, Hausmann K, Krizan D, et al. Development of TBF steels with 980 MPa tensile strength for automotive applications: microstructure and mechanical properties. New Developments in Advanced High-Strength Sheet Steels, AIST, Vail; 2013 June 23–26. p. 131–139.
   Google Scholar
• Villemonte P, Katsukura M, Kondo T. 1.2GPa tensile strength high formability, conventionally stamped steel. Great Designs in Steel 2014, Steel Market Development Institute, Michigan; 14 May 2014, presentation, 2014.
   Google Scholar
• Foster A, Dean TA, Lin J. Imperial Inventions Ltd: process for forming aluminium alloy sheet components. European patent EP 2324137 B1, United Kingdom, filed 2009, published 2013.
   Google Scholar
• Kawalla R, Oswald M, Schmidt C, et al. Development of a strip-rolling technology for Mg alloys based on the twin-roll-casting process. Magnesium Technol. 2008:177–182.
   Google Scholar
• Ullmann M, Berge F, Neh K. Development of a rolling technology for twin-roll cast magnesium strips. Metalurgija. 2015;54(4):711–714.
   Web of Science ®Google Scholar
• Yanagimoto J, Ikeuchi K. Sheet forming process of carbon fiber reinforced plastics for lightweight parts. CIRP Ann Manuf Techn. 2012;61(1):247–250. doi: 10.1016/j.cirp.2012.03.129
   Web of Science ®Google Scholar