Electric current as a steel wire manufacturing tool

References

• Troitskii O, Likhtman V. The anisotropy of the action of electron and γ radiation on the deformation of zinc single crystals in the brittle state. Soviet Phys Dok. 1963;8:91.
   Google Scholar
• Kravchenko V. Effect of directed electron beam on moving dislocations. Soviet Phys JETP. 1967;24(51):1676–1688.
   Google Scholar
• Conrad H, Karam N, Mannan S. Effect of electric current pulses on the recrystallization of copper. Scripta Metall. 1983;17(3):411–416. doi: 10.1016/0036-9748(83)90183-7
   Google Scholar
• Jiang Y, Tang G, Shek C, et al. On the thermodynamics and kinetics of electropulsing induced dissolution of Mg17Al12 phase in an aged Mg-9Al-1Zn alloy. Acta Mater. 2009;57(16):4797–4808. doi: 10.1016/j.actamat.2009.06.044
   Web of Science ®Google Scholar
• Guan L, Tang G, Chu P. Recent advances and challenges in electroplastic manufacturing processing of metals. J Mater Res. 2010;25:1215–1224. doi: 10.1557/JMR.2010.0170
   Web of Science ®Google Scholar
• Molotskii M, Fleurov V. Magnetic effect in electroplasticity of metals. Phys Rev. 1995;52(22):829–834. doi: 10.1103/PhysRevB.52.15829
   Web of Science ®Google Scholar
• Kinsey B, Cullen G, Jordan A, et al. Investigation of electroplastic effect at high deformation rates for 304SS and Ti-6Al-4V. CIRP Annals - Man Technol. 2013;62(1):279–282. doi: 10.1016/j.cirp.2013.03.058
   Web of Science ®Google Scholar
• Roh J, Seo J, Hong S, et al. The mechanical behavior of 5052-H32 aluminum alloys under a pulsed electric current. Int J Plas. 2014;58:84–89. doi: 10.1016/j.ijplas.2014.02.002
   Web of Science ®Google Scholar
• Yao K, Wang J, Zheng M, et al. A research on electroplastic effects in wire-drawing process of an austenitic stainless steel. Scripta Mater. 2001;45:533–539. doi: 10.1016/S1359-6462(01)01054-5
   Web of Science ®Google Scholar
• Zubov V. Patenting of steel wire. Metal Sci Heat Treatment. 1972;14(9):793–800. doi: 10.1007/BF00652032
   Google Scholar
• Bargujer S, Suri N, Belokar R. Pearlitic steel wire: high carbon steel based natural nanomaterial by lead patenting process. Mater Today Proc. 2016;3(3):1553–1562. doi: 10.1016/j.matpr.2016.04.042
   Google Scholar
• Sprecher A, Mannan S, Conrad H. On the mechanisms for the electroplastic effect in metals. Acta Metall. 1986;34(7):1145–1162. doi: 10.1016/0001-6160(86)90001-5
   Google Scholar
• Mason W, Rosenberg A. Phonon and electron drag coefficients in single-crystal aluminum. Phys Rev. 1966;151(2):434–441. doi: 10.1103/PhysRev.151.434
   Web of Science ®Google Scholar
• Alshits V, Darinskaya E, Koldaeva M, et al. Magnetoplastic effect: basic properties and physical mechanisms. Cryst Rep. 2003;48:768–795. doi: 10.1134/1.1612598
   Web of Science ®Google Scholar
• Kojima H, Suzuki T. Electron drag and flow stress in niobium and lead at 4.2 K. Phys Rev Let. 1968;21:869–898. doi: 10.1103/PhysRevLett.21.896
   Web of Science ®Google Scholar
• Conrad H, Guo Z, Sprecher A. Effect of an electric field on the recovery and recrystallization of Al and Cu. Scripta Metall. 1989;23:821–823. doi: 10.1016/0036-9748(89)90252-4
   Google Scholar
• Conrad H. Effects of electric current on solid state phase transformations in metals. Mater Sci Eng A. 2000;287(2):227–237. doi: 10.1016/S0921-5093(00)00780-2
   Web of Science ®Google Scholar
• Conrad H, Jung K. Effects of an external electric field applied during the solution heat treatment of the Al-Mg-Si-Cu alloy AA6111. Zeitschrift für Metallkunde. 2004;95(5):352–355. doi: 10.3139/146.017965
   Google Scholar
• Okazaki K, Kagawa M, Conrad H. A study of the electroplastic effect in metals. Scripta Metall. 1978;12:1063–1068. doi: 10.1016/0036-9748(78)90026-1
   Google Scholar
• Okazaki K, Kagawa M, Conrad H. An evaluation of the contributions of skin, pinch and heating effects to the electroplastic effect in titatnium. Mater Sci Eng. 1980;45:109–116. doi: 10.1016/0025-5416(80)90216-5
   Google Scholar
• Timsit R. Remarks on recent experimental observations of the electroplastic effect. Scripta Metall. 1981;15:461–464. doi: 10.1016/0036-9748(81)90232-5
   Google Scholar
• Goldman P, Motowidlo L, Galligan J. The absence of an electroplastic effect in lead at 4.2 K. Scripta Metall. 1981;15:353–356. doi: 10.1016/0036-9748(81)90208-8
   Google Scholar
• Franck J, Martin D. The superconducting transition temperature of lead. Can J Phys. 1961;39:1320–1329. doi: 10.1139/p61-156
   Web of Science ®Google Scholar
• Silsbee F. A note on electrical conduction in metals at low temperatures. Was Acad Sci. 1916;5(17):597–602.
   Google Scholar
• Qin RS, Bhowmik A. Computational thermodynamics in electric current metallurgy. Mater Sci Technol. 2015;31:1560–1563. doi: 10.1179/1743284714Y.0000000746
   Web of Science ®Google Scholar
• Nguyen-Tran H, Oh H, Hong S, et al. A review of electrically-assisted manufacturing. Int J Precs Eng Man-Green Technol. 2015;2:365–376. doi: 10.1007/s40684-015-0045-4
   Web of Science ®Google Scholar
• Stashenko V, Troitskii O, Novikova N. Electroplastic drawing medium-carbon steel. J Mach Man Reliability. 2009;38:369–372. doi: 10.3103/S1052618809040128
   Google Scholar
• Xu Z, Tang G, Tian S, Ding F, et al. Research of electroplastic rolling of AZ31 Mg alloy strip. J Mater Proc Technol. 2007;182:128–133. doi: 10.1016/j.jmatprotec.2006.07.019
   Web of Science ®Google Scholar
• Kim W, Yeom K, Thien N, et al. Electrically assisted blanking using the electroplasticity of ultra-high strength metal alloys. CIRP Annals - Man Technol. 2014;63(1):273–276. doi: 10.1016/j.cirp.2014.03.064
   Web of Science ®Google Scholar
• Cao W, Sprecher A, Conrad H. Effect of strain rate on the electroplastic effect in Nb. Scripta Metall. 1989;23:151–155. doi: 10.1016/0036-9748(89)90110-5
   Google Scholar
• Ross C, Irvin D, Roth J. Manufacturing aspects relating to the effects of direct current on the tensile properties of metals. J Eng Mater Technol. 2007;129(2):342.347 doi: 10.1115/1.2712470
   Web of Science ®Google Scholar
• ASM-International. ASM material data sheet.
   Google Scholar
• Thien N, Jeong Y, Hong S, Kim M, et al. Electrically assisted tensile behavior of complex phase ultra-high strength steel. Int J Precs Eng Man-Green Technol. 2016;3(4):325–333. doi: 10.1007/s40684-016-0041-3
   Web of Science ®Google Scholar
• Wilzer J, Küpferle J, Weber S, et al. Influence of alloying elements, heat treatment, and temperature on the thermal conductivity of heat treatable steels. Steel Res Int. 2015;86(11):1234–1241. doi: 10.1002/srin.201400294
   Web of Science ®Google Scholar
• Vinh N, Kim M, Yu H, editors. The tensile electroplasticity of magnesium AZ31 alloy with a single pulse of electric current. The 9th international conference and workshop on numerical simulation of 3D sheet metal forming processes, 2014 Jan 6–10. Melbourne: AIP; 2013.
   Google Scholar
• Kim M, Lee K, Oh K, et al. Electric current-induced annealing during uniaxial tension of aluminum alloy. Scripta Mater. 2013;75:58–61. doi: 10.1016/j.scriptamat.2013.11.019
   Web of Science ®Google Scholar
• Golis B, Pilarczyk J, Shemenski R, et al. Steel Tire Cord Technology. Guilford (CT): Wire Association International; 1999.
   Google Scholar
• Zhang J, Tang G, Yan Y, et al. Effect of current pulses on the drawing stress and properties of Cr17Ni6Mn3 and 4J42 alloys in the cold-drawing process. J Mater Procs Technol. 2002;120(1–3):13–16. doi: 10.1016/S0924-0136(01)01019-6
   Web of Science ®Google Scholar
• Tang G, Zhang J, Zheng M, et al. Experimental study of electroplastic effect on stainless steel wire 304L. Mater Sci Eng A. 2000;281(1–2):263–267. doi: 10.1016/S0921-5093(99)00708-X
   Web of Science ®Google Scholar
• Tang G, Zheng M, Zhu Y, et al. The application of the electro-plastic technique in the cold-drawing of steel wires. J Mater Procs Technol. 1998;84(1–3):268–270. doi: 10.1016/S0924-0136(98)00229-5
   Web of Science ®Google Scholar
• Hecker S, Stout M, Staudhammer K, et al. Effects of strain state and strain rate on deformation-induced transformation in 304 stainless steel: part I. Magnetic measurements and mechanical behavior. Metall Trans A. 1982;13(4):619–626. doi: 10.1007/BF02644427
   Web of Science ®Google Scholar
• Tang G, Zhang J, Yan Y, et al. The engineering application of the electroplastic effect in the cold-drawing of stainless steel wire. J Mater Procs Technol. 2003;137(1–3):96–99. doi: 10.1016/S0924-0136(02)01091-9
   Web of Science ®Google Scholar
• Tang G, Zheng M, Zhu Y, et al. Electroplastic effect and its engineering application. Iron Steel (China). 1998;33(9):35–37.
   Google Scholar
• Celozzi S, Araneo R, Lovat G. Electromagnetic shielding. Hoboken (NJ): Wiley; 2008.
   Google Scholar
• Klimov K. Alternative methods of producing bars and wire. Metallurgist. 2007;51(9–10):511–515. doi: 10.1007/s11015-007-0094-1
   Web of Science ®Google Scholar
• Beddoes J, Bibby M. Principles of metal manufacturing processes. Eastbourne: Elsevier Butterworth-Heinemann; 2003.
   Google Scholar
• Suliga M, MKruzel R. The mechanical properties of high carbon steel wires drawn in conventional and hydrodynamic dies. Metalurgija Metabk. 2013;52(521):43–46.
   Google Scholar
• Gridnev V, Gavrilyuk V, Meshkov Y. The correlation between cold deformed steel structure and durability. Metallofizika. 1968;23(30):43–46.
   Google Scholar
• Omoigiade O, Haldar A, Qin RS. Macroscopic characterization of mechanical properties in electric current treated dry drawn high strength wires. MRS Adv. 2017;2(17):963–974. doi: 10.1557/adv.2017.182
   Web of Science ®Google Scholar
• Buono V, Gonzalez B, Andrade M. Kinetics of strain ageing in drawn pearlitic steels. Metall Mater Trans A. 1998;29(5):1415–1423. doi: 10.1007/s11661-998-0356-y
   Web of Science ®Google Scholar
• McNeal T, Beers J, Roth J. The microstructural effects on magnesium alloy AZ31B-O while undergoing an electrically-assisted manufacturing process. In: ASME 2009 international manufacturing science and engineering conference, Volume 1; 2009 Oct 4–7. West Lafayette (IN): ASME; 2009.
   Google Scholar
• Coles L, Roy A, Silberschmidt A, editors. Analysis of pulsed electroplasticity in metals. In: 2017 IEEE 21st international conference on pulsed power (PPC); 2017 Jun 18–22. Brighton: IEEE; 2018.
   Google Scholar