Corrosion–microstructure interrelations in new low-lead and lead-free brass alloys

References

• Jacobsson D, Däcker CÅ, Sundberg R, et al. Failure analysis of brass. Stockholm: Swerea KIMAB; 2005.
   Google Scholar
• http://copperalliance.org/ [Internet]. Washington (DC): Copper Development Association; [cited 2018 Feb 18]. Available from: http://copperalliance.org.uk/resource-library/pub-117---the-brasses.
   Google Scholar
• Brock J, Zaroog OS. Reference module in materials science and materials engineering. Cambridge (MA): Elsevier Academic Press; 2016. Chapter Copper Alloys: Corrosion; p. 1–4.
   Google Scholar
• Zhou P, Ogle K. Reference module in chemistry, molecular sciences and chemical. Cambridge (MA): Elsevier Academic Press; 2017. Chapter The Corrosion of Copper and Copper Alloys; p. 478–489.
   Google Scholar
• Brandl E, Malke R, Beck T, et al. Stress corrosion cracking and selective corrosion of copper-zinc alloys for the drinking water installation. Mater Corros. 2009;60(4):251–258. doi: 10.1002/maco.200805079
   Web of Science ®Google Scholar
• Sarver E, Edwards M. Effects of flow, brass location, tube materials and temperature on corrosion of brass plumbing devices. Corros Sci. 2011;53(5):1813–1824. doi: 10.1016/j.corsci.2011.01.060
   Web of Science ®Google Scholar
• Hung CY, Lin CM, Hsieh CC, et al. A novel approach to improving resistance to dezincification of diphasic brass. J Alloys Compd. 2016;671:502–508. doi: 10.1016/j.jallcom.2016.01.261
   Web of Science ®Google Scholar
• Trethewey KR, Pinwill I. The dezincification of free-machining brasses in sea water. Surf Coatings Technol. 1987;30:289–307. doi: 10.1016/0257-8972(87)90087-9
   Web of Science ®Google Scholar
• Oliver J, Hertzman S, Hutchinson B, et al. Dezincification of brass – a mechanistic study. Stockholm: Swedish Institute of Metals research; 2000. (IM-2000; 045).
   Google Scholar
• Zhou P, Hutchison MJ, Erning JW, et al. An in situ kinetic study of brass dezincification and corrosion. Electrochim Acta. 2017;229:141–154. doi: 10.1016/j.electacta.2017.01.078
   Web of Science ®Google Scholar
• Davis DD. A note on dezincification of brass and the inhibiting effect of elemental additions. New York: Copper Development Association Inc; 1993.
   Google Scholar
• Jones DA. Princliples and prevention of corrosion. New York (NY): Macmillan Publishing Company; 1992. Chapter 9.5, Princliples and Prevention of Corrosion; p. 322–332.
   Google Scholar
• Sundberg R, Holm R, Hertzman S, et al. Dezincification (DA) and intergranular corrosion (IGA) of brass – influence of composition and heat treatment. Stockholm: Swedish Institute of Metals research; 2003. (IM-2000; 045).
   Google Scholar
• Wessman S, Oliver J, Nylén M, et al. Effect of stress relieving heat treatment on the corrosion of brass. Stockholm: Swerea KIMAB; 2007 (Swerea KIMAB Report 2007; 541).
   Google Scholar
• Hutchinson B, Oliver J, Lindh-Ulmgren E, et al. Copper: better properties for innovative products. Stockholm: Corrosion and Metals Research Institute (KIMAB); 2007. Chapter 19, Investigations into the Dezincification of α-Brass; p. 144–152.
   Google Scholar
• Newman RC, Shahrabi T, Sieradzki K. Direct electrochemical measurement of dezincification including the effect of alloyed arsenic. Corros Sci. 1988;28(9):873–886. doi: 10.1016/0010-938X(88)90036-4
   Web of Science ®Google Scholar
• Luo X, Yu J. The inhibition of the stress corrosion cracking of 70/30 brass in nitrite solution with additions of alloying arsenic and arsenic anions. Corros Sci. 1996;38(5):767–780. doi: 10.1016/0010-938X(95)00165-G
   Web of Science ®Google Scholar
• Claesson E, Rod O. The effect of alloying elements on the corrosion resistance of brass. Mater Sci Technol. 2016;32(17):1794–1803. doi: 10.1080/02670836.2016.1254925
   Web of Science ®Google Scholar
• Mazza F, Torchio S. Factors influencing the susceptibility to intergranular attack, stress corrosion cracking and de-alloying attack of aluminium brass. Corros Sci. 1983;23(10):1053–1072. doi: 10.1016/0010-938X(83)90088-4
   Web of Science ®Google Scholar
• Sundberg R, Hertzman S, Linder M. Copper: better properties for innovative products. Stockholm: Corrosion and Metals Research Institute (KIMAB); 2007. Chapter 20, Intergranular Corrosion (IGA) of Brass; p. 153–163.
   Google Scholar
• Živković D, Begović E, Kostov A, et al. Lead-free alternatives for traditional free machining brasses. In: Štrbac N, Markovic I, Balanovic L, editors. The 43rd International October Conference on Mining and Metallurgy;2011 October 12–15; Kladovo (Serbia): University of Belgrade;2017. p. 224–227.
   Google Scholar
• 4MS Joint Management Committee. Acceptance of metallic materials used for products in contact with drinking water Part B – 4MS common composition list. Seville: 4MS Joint Management Committee; 2013.
   Google Scholar
• nordicbrass.se [Internet]. Sweden: Nordic Brass Gusum AB; 2018; [cited 2018 Feb 19]. Available from: http://www.nordicbrass.se/en/products/rod-cw625n.
   Google Scholar
• Swedish Standard Institute. Corrosion of metals and alloys – determination of dezincification resistance of copper alloys with zinc – part 1: test method (ISO 6509-1:2014). Stockholm: Swedish Standard Institute; 2014. Standard SS-EN ISO 6509-1:2014.
   Google Scholar