References
- Mihajlović A, Jovanović M, Nešić O. Interaction of dislocations with precipitates in a Cu–Be–Ni–Zr alloy. Met Technol. 1979;6(1):190–193. doi:10.1179/030716979803276200.
- Okamoto M. The investigation of the ageing characteristics of the alloys of Be-Ni-Cu system. Nippon Kinzoku Gakkaishi/J Japan Inst Met. 1941;5(3):91–95. doi:10.2320/jinstmet1937.5.3_91.
- Phillips VA, Tanner LE. High resolution electron microscope observations on G.P. zones in an aged Cu-1.97wt.% be crystal. Acta Metall. 1973;21(4):441–448. doi:10.1016/0001-6160(73)90201-0.
- Wilkes P. Formation of guinier-preston zones in CuBe alloys. Acta Metall. 1968;16(2):153–158. doi:10.1016/0001-6160(68)90110-7.
- Altenberger I, Kuhn HA, Müller HR, et al. Material properties of high-strength beryllium-free copper alloys. Int J Mater Prod Technol. 2015;50(2):124–146. doi:10.1504/IJMPT.2015.067820.
- Botcharova E, Freudenberger J, Gaganov A, et al. Novel Cu-Nb-wires: processing and characterisation. Mater Sci Eng A. 2006;416(1-2):261–268. doi:10.1016/j.msea.2005.10.022.
- Islamgaliev RK, Nesterov KM, Valiev RZ. Structure, strength, and electric conductivity of a Cu-Cr copper-based alloy subjected to severe plastic deformation. Phys Met Metall. 2015;116(2):209–218. doi:10.1134/S0031918X14090063.
- Lei Q, Li Z, Xiao T, et al. A new ultrahigh strength Cu-Ni-Si alloy. Intermetallics. 2013;42:77–84. doi:10.1016/j.intermet.2013.05.013.
- Nagarjuna S, Sharma KK, Sudhakar I, et al. Age hardening studies in a Cu-4.5Ti-0.5Co alloy. Mater Sci Eng A. 2001;313(1-2):251–260. doi:10.1016/S0921-5093(00)01834-7.
- Shangina DV, Gubicza J, Dodony E, et al. Improvement of strength and conductivity in Cu-alloys with the application of high pressure torsion and subsequent heat-treatments. J Mater Sci. 2014;49(19):6674–6681. doi:10.1007/s10853-014-8339-4.
- Durrschnabel W, Stuer H, Steeb J, et al. Copper-nickel-tin-titanium-alloy and a method for its manufacture. Google Patents; 1986.
- Watanabe R, Sakamoto D. Copper-base alloys for leadframes. Google Patents; 1986.
- Newman LS, Mroz MM, Balkissoon R, et al. Beryllium sensitization progresses to chronic beryllium disease: a longitudinal study of disease risk. Am J Respir Crit Care Med. 2005;171(1):54–60. doi: 10.1164/rccm.200402-190OC
- Wambach PF, Laul J. Beryllium health effects, exposure limits and regulatory requirements. J Chem HealthSaf. 2008;15(4):5–12. doi: 10.1016/j.jchas.2008.01.012
- Barber ZH, Blamire MG. High throughput thin film materials science. Mater Sci Technol. 2008;24(7):757–770. doi:10.1179/174328408X293612.
- Ludwig A, Zarnetta R, Hamann S, et al. Development of multifunctional thin films using high-throughput experimentation methods. Int J Mater Res. 2008;99(10):1144–1149. doi:10.3139/146.101746.
- Gebhardt T, Music D, Takahashi T, et al. Combinatorial thin film materials science: from alloy discovery and optimization to alloy design. Thin Solid Films. 2012;520(17):5491–5499. doi:10.1016/j.tsf.2012.04.062.
- Gamez G, Mohanty G, Michler J. Ultrafast elemental mapping of materials combinatorial libraries and high-throughput screening samples via pulsed glow discharge optical emission spectroscopy. J Anal At Spectrom. 2013;28(7):1016–1023. doi:10.1039/c3ja50060h.
- Zarnetta R, Kneip S, Somsen C, et al. High-throughput characterization of mechanical properties of Ti-Ni-Cu shape memory thin films at elevated temperature. Mater Sci Eng A. 2011;528(21):6552–6557. doi:10.1016/j.msea.2011.05.006.
- Zhao JC. A combinatorial approach for efficient mapping of phase diagrams and properties. J Mater Res. 2001;16(6):1565–1578. doi:10.1557/JMR.2001.0218.
- Zhao JC. Combinatorial approaches as effective tools in the study of phase diagrams and composition-structure-property relationships. Prog Mater Sci. 2006;51(5):557–631. doi:10.1016/j.pmatsci.2005.10.001.
- Kodentsov AA, Bastin GF, Van Loo FJJ. The diffusion couple technique in phase diagram determination. J Alloys Compd. 2001;320(2):207–217. doi:10.1016/S0925-8388(00)01487-0.
- Liu XJ, Ohnuma I, Kainuma R, et al. Phase equilibria in the Cu-rich portion of the Cu-Al binary system. J Alloys Compd. 1998;264(1–2):201–208. doi: 10.1016/S0925-8388(97)00235-1
- Wang YM, Liu HS, Zhang LG, et al. The isothermal section of the Co-Cu-Ti ternary system at 1023 K by using diffusion triple technique. Mater Sci Eng A. 2006;431(1–2):184–190. doi:10.1016/j.msea.2006.05.137.
- Zhang H, He Y, Yang F, et al. Thermodynamic assessment of Cu-Ni-Ti ternary system assisted with key measurements. Thermochim Acta. 2013;574:121–132. doi:10.1016/j.tca.2013.08.012.
- Liu XJ, Wang CP, Ohnuma I, et al. Experimental investigation and thermodynamic calculation of the phase equilibria in the Cu-Sn and Cu-Sn-Mn systems. Metall Mater Trans A. 2004;35 A(6):1641–1654. doi: 10.1007/s11661-004-0073-0
- Klotz UE, Liu C, Uggowitzer PJ, et al. Experimental investigation of the Cu-Ti-Zr system at 800°C. Intermetallics. 2007;15(12):1666–1671. doi:10.1016/j.intermet.2007.07.004.
- Porter DA, Easterling KE, Sherif M. Phase transformations in metals and alloys, (Revised Reprint). CRC press; 2009.
- Davis JR. Copper and copper alloys. ASM Int. 2001.
- Iijima Y, Hoshino K, Hirano K-I. Diffusion of titanium in copper. Metall Trans A. 1977;8(6):997–1001. doi: 10.1007/BF02661585
- Miccoli I, Edler F, Pfnür H, et al. The 100th anniversary of the four-point probe technique: the role of probe geometries in isotropic and anisotropic systems. J Phys: Condens Matter. 2015;27:223201.
- Rdzawski Z, Stobrawa J, Głuchowski W, et al. Thermomechanical processing of CuTi4 alloy. J Achiev MaterManuf Eng. 2010;42(2):9–25.