References
- Hung JC, Tsai YC. Investigation of the effects of ultrasonic vibration-assisted micro-upsetting on brass. Mater Sci Eng A. 2013;580:125–132. doi: 10.1016/j.msea.2013.04.074
- Mousavi S, Feizi H, Madoliat R. Investigations on the effects of ultrasonic vibrations in the extrusion process. J Mater Process Technol. 2007;187-188:657–661. doi: 10.1016/j.jmatprotec.2006.11.168
- Liu Y, Suslov S, Han Q, et al. Microstructure of the pure copper produced by upsetting with ultrasonic vibration. Mater Lett. 2012;67:52–55. doi: 10.1016/j.matlet.2011.08.086
- Murakawa M, Jin M. The utility of radially and ultrasonically vibrated dies in the wire drawing process. J Mater Process Technol. 2001;113:81–86. doi: 10.1016/S0924-0136(01)00635-5
- Nazarova A, Mulyukov R, Tsarenko Y, et al. Effect of ultrasonic treatment on the microstructure and properties of nanostructured nickel processed by high pressure torsion. Mater Sci Forum. 2011;667–669:605–609. doi: 10.4028/www.scientific.net/MSF.667-669.605
- Stepanov YN, Alekhin VP. [The change of edge dislocation density distribution in specimen during standing wave initiation]. Phys Chem Mater Treat. 1999;1:78–83. Russian.
- Samigullina AA, Tsarenko YV, Rubanik VV, et al. [Effect of ultrasonic treatment on structure and mechanical properties of ultrafine grained nickel processed by equal-channel angular pressing]. Lett Mater. 2012;2:214–217. Russian. doi: 10.22226/2410-3535-2012-4-214-217
- Lu J, Wu X, Liu Z, et al. Microstructure and mechanical properties of ultrafine-grained copper produced using intermittent ultrasonic-assisted equal-channel angular pressing. Metall Mater Trans A. 2016;47:4648–4658. doi: 10.1007/s11661-016-3622-4
- Ahmadi F, Farzin M, Meratian M, et al. Improvement of ECAP process by imposing ultrasonic vibrations. Int J Adv Manuf Technol. 2015;79:503–512. doi: 10.1007/s00170-015-6848-1
- Dutta RK, Petrov RH, Delhez R, et al. The effect of tensile deformation by in situ ultrasonic treatment on the microstructure of low-carbon steel. Acta Mater. 2013;61:1592–1602. doi: 10.1016/j.actamat.2012.11.036
- Huang Z, Lucas M, Adams MJ. Influence of ultrasonics on upsetting of a model paste. Ultrasonics. 2002;40:43–48. doi: 10.1016/S0041-624X(02)00245-7
- Hung JC, Hung C. The influence of ultrasonic-vibration on hot upsetting of aluminum alloy. Ultrasonics. 2005;43:692–698. doi: 10.1016/j.ultras.2005.03.001
- Hung JC, Tsai YC, Hung YC. Frictional effect of ultrasonic-vibration on upsetting. Ultrasonics. 2007;46:277–284. doi: 10.1016/j.ultras.2007.03.003
- Bunget C, Ngaile G. Influence of ultrasonic vibration on micro-extrusion. Ultrasonics. 2011;51:606–616. doi: 10.1016/j.ultras.2011.01.001
- Kumar VC, Hutchings IM. Reduction of the sliding friction of metals by the application of longitudinal or transverse ultrasonic vibration. Tribol Int. 2004;37:833–840. doi: 10.1016/j.triboint.2004.05.003
- Hung JC, Huang CC. Evaluation of friction in ultrasonic vibration-assisted press forging using double cup extrusion tests. Int J Precision Eng Manuf. 2012;13:2103–2108. doi: 10.1007/s12541-012-0278-x
- Valiev RZ, Zhilyaev AP, Langdon TG. Bulk nanostructured materials: fundamentals and applications. Hoboken (NJ): John Wiley & Sons; 2013.
- Prangnell PB, Harris C, Roberts SM. Finite element modelling of equal channel angular extrusion. Scr Mater. 1997;37:983–989. doi: 10.1016/S1359-6462(97)00192-9
- Dumoulin S, Roven HJ, Werenskoid JC, et al. Finite element modeling of equal channel angular pressing: effect of material properties, friction and die geometry. Mater Sci Eng A. 2005;410-411:248–251. doi: 10.1016/j.msea.2005.08.103
- Ahmadi F, Farzin M. Finite element analysis of ultrasonic-assisted equal channel angular pressing. Proc Inst Mech Eng C J Mech Eng Sci. 2014;228:1859–1868. doi: 10.1177/0954406213514961
- Balasundar I, Sudhakara Rao M, Raghu T. Equal channel angular pressing die to extrude a variety of materials. Mater Design. 2009;30:1050–1059. doi: 10.1016/j.matdes.2008.06.057
- Djavanroodi F, Ahmadian H, Koohkan K, et al. Ultrasonic assisted-ECAP. Ultrasonics. 2013;53:1089–1096. doi: 10.1016/j.ultras.2013.02.003
- Bagherzadeh S, Abrinia K, Liu Y, et al. The effect of combining high-intensity ultrasonic vibration with ECAE process on the process parameters and mechanical properties and microstructure of aluminum 1050. Int J Adv Manuf Technol. 2017;88:229–240. doi: 10.1007/s00170-016-8779-x