Microstructure and mechanical properties of Mg–6Li–xAl–0.8Sn alloys

References

• Higashi K, Chino Y, Takigawa Y, et al. Special issue on platform science and technology for advanced magnesium alloys, VI PREFACE. Mater Trans. 2014;55(8):1179–1179. doi: 10.2320/matertrans.MPR2014903
   Web of Science ®Google Scholar
• Mahata A, Sikdar K. Molecular dynamics simulation of nanometer scale mechanical properties of hexagonal Mg-Li alloy. J Magnes Alloy. 2016;4(1):36–43. doi: 10.1016/j.jma.2015.12.001
   Web of Science ®Google Scholar
• Liu G, Xie W, et al. Dynamic recrystallization behavior and corrosion resistance of a dual-phase Mg-Li alloy. Materials. 2018;11(3):408. doi: 10.3390/ma11030408
   Web of Science ®Google Scholar
• Hanwu D, Limin W, Ke L, et al. Microstructure and deformation behaviors of two Mg–Li dual-phase alloys with an increasing tensile speed. Mater Des. 2016;90:157–164. doi: 10.1016/j.matdes.2015.10.111
   Web of Science ®Google Scholar
• Dong H, Pan F, Jiang B, et al. Evolution of microstructure and mechanical properties of a duplex Mg–Li alloy under extrusion with an increasing ratio. Mater Des. 2014;57:121–127. doi: 10.1016/j.matdes.2013.12.055
   Web of Science ®Google Scholar
• Drozd Z, Trojanova Z, Kúdela S, et al. Deformation behaviour of Mg-Li-Al alloys. J Alloy Compd. 2004;378(1-2):192–195. doi: 10.1016/j.jallcom.2004.01.040
   Web of Science ®Google Scholar
• Zhou WR, Zheng YF, Leeflang MA, et al. Mechanical property, biocorrosion and in vitro biocompatibility evaluations of Mg-Li-(Al)-(RE) alloys for future cardiovascular stent application. Acta Biomater. 2013;9(10):8488–8498. doi: 10.1016/j.actbio.2013.01.032
   PubMed Web of Science ®Google Scholar
• Xu WQ, Birbilis N, Sha G, et al. A high-specific-strength and corrosion-resistant magnesium alloy. Nat Mater. 2015;14(12):1229–1235. doi: 10.1038/nmat4435
   PubMed Web of Science ®Google Scholar
• Yang Y, Peng XD, Wen H, et al. Influence of extrusion on the microstructure and mechanical behavior of Mg-9Li-3Al-xSr alloys. Metall Mater Trans A Phys Metall Mater Sci. 2013;44A(2):1101–1113. doi: 10.1007/s11661-012-1441-9
   Web of Science ®Google Scholar
• Luo Z, Hao ZY, Jiang B, et al. Micro arc oxidation and electrophoretic deposition effect on damping and sound transmission characteristics of AZ31B magnesium alloy. J Cent South Univ. 2014;21(9):3419–3425. doi: 10.1007/s11771-014-2317-5
   Web of Science ®Google Scholar
• Park GH, Kim JT, Park HJ, et al. Development of lightweight Mg-Li-Al alloys with high specific strength. J Alloy Compd. 2016;680:116–120. doi: 10.1016/j.jallcom.2016.04.109
   Web of Science ®Google Scholar
• Liu J, Peng X, Li M, et al. Effect of Sr addition on microstructure and elevated temperature mechanical properties of Mg-3Zn-1Y alloy. Mater Sci Eng A. 2016;655:331–338. doi: 10.1016/j.msea.2015.11.093
   Web of Science ®Google Scholar
• Xu TC, Peng XD, Jiang JW, et al. Effect of Sr content on microstructure and mechanical properties of Mg-Li-Al-Mn alloy. Trans Nonferrous Metals Soc China. 2014;24(9):2752–2760. doi: 10.1016/S1003-6326(14)63406-3
   Web of Science ®Google Scholar
• Yang Y, Peng XD, Ren F, et al. Constitutive modeling and hot deformation behavior of duplex structured Mg-Li-Al-Sr alloy. J Mater Sci Technol. 2016;32(12):1289–1296. doi: 10.1016/j.jmst.2016.11.015
   Web of Science ®Google Scholar
• He JJ, Jiang B, Xu J, et al. Effect of texture symmetry on mechanical performance and corrosion resistance of magnesium alloy sheet. J Alloy Compd. 2017;723:213–224. doi: 10.1016/j.jallcom.2017.06.269
   Web of Science ®Google Scholar
• Jiang Y, Ya C, Gao Junjie, et al. Comparative study regarding the effect of Al, Zn, and Gd on the microstructure and mechanical properties of Mg alloy Mg-Sn-Li. Mater Des. 2016;105:34–40. doi: 10.1016/j.matdes.2016.05.061
   Web of Science ®Google Scholar
• Tang Y, Jia W, Liu X, et al. Precipitation evolution during annealing of Mg-Li alloys. Mater Sci Eng A. 2017;689:332–344. doi: 10.1016/j.msea.2017.02.035
   Web of Science ®Google Scholar
• Yu Z, Hu M, Tang A, et al. Effect of aluminium on the microstructure and mechanical properties of as-cast magnesium–manganese alloys. Mater Sci Technol. 2017;33(17):2086–2096. doi: 10.1080/02670836.2017.1345824
   Web of Science ®Google Scholar
• Kumar V, Shekhar R, Balasubramaniam R, et al. Microstructure evolution and texture development in thermomechanically processed Mg-Li-Al based alloys. Mater Sci Eng A. 2012;547:38–50. doi: 10.1016/j.msea.2012.03.074
   Web of Science ®Google Scholar
• Pan FS, Xu AL, Ye J, et al. Effects of rotation rate on microstructure and mechanical properties of friction stir-welded Mg-5Al-1Sn magnesium alloy. Int J Adv Manuf Technol. 2017;91(1-4):389–397. doi: 10.1007/s00170-016-9752-4
   Web of Science ®Google Scholar
• Wang J, Han J, Jung IH, et al. Thermodynamic optimizations on the binary Li-Sn system and ternary Mg-Sn-Li system. Calphad Comput Coupling Ph Diagr Thermochem. 2014;47:100–113. doi: 10.1016/j.calphad.2014.07.001
   Web of Science ®Google Scholar
• Poddar P, Kamaraj A, Murugesan AP, et al. Microstructural features of Mg-8%Sn alloy and its correlation with mechanical properties. J Magnes Alloy. 2017;5(3):348–354. doi: 10.1016/j.jma.2017.07.003
   Web of Science ®Google Scholar
• Fei P, Qu Z, Wu R, et al. Microstructure and hardness of Mg-9Li-6A1-xLa (x = 0, 2, 5) alloys during solid solution treatment. Mater Sci Eng A. 2015;625:169–176. doi: 10.1016/j.msea.2014.12.014
   Web of Science ®Google Scholar
• Han YS, Kim DH, Lee HI, et al. Effect of applied pressure during solidification on the microstructural refinement in an Al-Cu alloy. Scr Metall Mater. 1994;31(12):1623–1628. doi: 10.1016/0956-716X(94)90453-7
   Google Scholar
• Kim Y, Son H. Effects of Li addition on microstructure and mechanical properties of Mg–6Al–2Sn–0.4Mn alloys. Trans Nonferrous Metals Soc China. 2016;26(3):697–703. doi: 10.1016/S1003-6326(16)64160-2
   Web of Science ®Google Scholar
• Fu X, Yang Y, Hu J, et al. Microstructure and mechanical properties of as-cast and extruded Mg-8Li-1Al-0.5Sn alloy. Mater Sci Eng A. 2018;709:247–253. doi: 10.1016/j.msea.2017.10.036
   Web of Science ®Google Scholar
• Lee S-J, Do LHT. Effects of copper additive on micro-arc oxidation coating of LZ91 magnesium-lithium alloy. Surf Coat Technol. 2016;307:781–789. doi: 10.1016/j.surfcoat.2016.10.008
   Web of Science ®Google Scholar
• Son H, Kim Y, Kim DW, et al. Effects of Li addition on the microstructure and mechanical properties of Mg–3Zn–1Sn–0.4Mn based alloys. J Alloy Compd. 2013;564:130–137. doi: 10.1016/j.jallcom.2013.02.157
   Web of Science ®Google Scholar
• Xiang Q, Jiang B, Zhang Y, et al. Effect of rolling-induced microstructure on corrosion behaviour of an as-extruded Mg-5Li-1Al alloy sheet. Corrosion Sci. 2017;119:14–22. doi: 10.1016/j.corsci.2017.02.009
   Web of Science ®Google Scholar
• Yang Y, Xiong X, Su J, et al. Influence of extrusion temperature on microstructure and mechanical behavior of duplex Mg-Li-Al-Sr alloy. J Alloy Compd. 2018;750:696–705. doi: 10.1016/j.jallcom.2018.03.319
   Web of Science ®Google Scholar
• Xiang Q, Wu RZ, Zhang ML, et al. Influence of Sn on microstructure and mechanical properties of Mg–5Li–3Al–2Zn alloys. J Alloy Compd. 2009;477(1-2):832–835. doi: 10.1016/j.jallcom.2008.10.166
   Web of Science ®Google Scholar