References
- Hatchett C. IV. experiments and observations on the various alloys, on the specific gravity, and on the comparative wear of gold. Being the substance of a report made to the right honourable the lords of the committee of privy council, appointed to take into consideration the state of the coins of this kingdom. Philos Trans R Soc London. 1803;93:43–194. Available from: http://rstl.royalsocietypublishing.org/content/93/43.full.pdf+html.
- Rennie G. Experiments on the friction and abrasion of the surfaces of solids. Abstracts of the papers printed in the philosophical transactions of the royal society of london, vol. 2. The Royal Society; 1833. p. 364–365.
- Bhansali K, Miller AE. Resistance of pure metals to low stress abrasive wear. Wear. 1981;71:375–379. Available from: http://www.sciencedirect.com/science/article/pii/0043164881902337.
- Gahr KHZ. Microstructure and wear of materials in tribology series. Vol. 10. Elsevier; 1987. p. 1–7. Available from: www.sciencedirect.com/science/article/pii/S0167892208707193.
- Sarkar AD. Wear of metals: international series in materials science and technology. Vol. 18. Elsevier; 2013.
- Davis JR. Surface engineering for corrosion and wear resistance. London: ASM International; 2001. Available from: https://books.google.co.uk/books?id=Lt7WBiILHpYC.
- Neale MJ, Gee M. Industrial wear problems. 2001. Chapter 2, p. 3–III. Available from: http://www.sciencedirect.com/science/article/pii/B9780815514718500025.
- Stachowiak GW, Batchelor AW. Abrasive, erosive and cavitation wear in Engineering tribology. 2014. Chapter 11, p. 525–576. Available from: http://www.sciencedirect.com/science/article/pii/B9780123970473000114.
- Stachowiak AWBGW, Grazyna B. Classification of wear processes. Vol. 10; 1987. Chapter 4, Microstructure and Wear of Materials, p. 80–131. Available from: http://www.sciencedirect.com/science/article/pii/S0167892208707223.
- Rabinowicz E, Dunn L, Russell P. A study of abrasive wear under three-body conditions. Wear. 1961;4:345–355. Available from: http://www.sciencedirect.com/science/article/pii/0043164861900023.
- Rabinowicz E, Dunn L, Russell P. A study of abrasive wear under three-body conditions. Wear. 1961;4:345–355.
- Sundström A, José R, Olsson M. Wear behaviour of some low alloyed steels under combined impact/abrasion contact conditions. Wear. 2001;250:744–754.
- Chintha A, Valtonen K, Kuokkala V-T, Kundu S, Peet M, Bhadeshia H. Role of fracture toughness in impact-abrasion wear. Wear. 2019;430–431:430–437. Available from: http://www.sciencedirect.com/science/article/pii/S0043164819302285.
- Xi JT, Zhou QD, Liu SH, Song GS. Influence of retained austenite on the wear resistance of high chromium cast iron under various impact loads. Wear. 1993;162:83–88. Wear of Materials: Proceedings of the 9th International Conference, Available from: http://www.sciencedirect.com/science/article/pii/0043164893904877.
- Fang L, Liu W, Du D, Zhang X, Xue Q. Predicting three-body abrasive wear using monte carlo methods. Wear. 2004;256:685–694.
- Tylczak JH, Hawk JA, Wilson RD. A comparison of laboratory abrasion and field wear results. Wear. 1999;225-229(Part 2):1059–1069. Available from: http://www.sciencedirect.com/science/article/pii/S0043164899000435.
- Hurricks P. Some metallurgical factors controlling the adhesive and abrasive wear resistance of steels. A review. Wear. 1973;26:285–304. Available from: http://www.sciencedirect.com/science/article/pii/0043164873901841.
- Misra A, Finnie I. A review of the abrasive wear of metals. J Eng Mater Technol. 1982;104:94–101.
- Moore M. A review of two-body abrasive wear. Wear. 1974;27(1):1–17.
- Childs T. The sliding wear mechanisms of metals, mainly steels. Tribol Int. 1980;13(6):285–293.
- Gates J. Two-body and three-body abrasion: a critical discussion. Wear. 1998;214(1):139–146.
- Torrance A. Modelling abrasive wear. Wear. 2005;258(1-4):281–293.
- Pintaúde G, Albertin E, Sinatora A. A review on abrasive wear mechanisms of metallic materials. International Conference on Abrasion Wear Resistant Alloyed White Cast Iron for Rolling and Pulverizing Mills. IPT/EPUSP; 2005.
- Blau PJ. Fifty years of research on the wear of metals. Tribol Int. 1997;30(5):321–331.
- Archard JF. Contact and rubbing of flat surfaces. J Appl Phys. 1953;24:981–988.
- Gahr KHZ. Wear by hard particles. Tribol Int. 1998;31:587–596. Available from: http://www.sciencedirect.com/science/article/pii/S0301679X98000796.
- Rabinowicz E, Mutis A. Effect of abrasive particle size on wear. Wear. 1965;8:381–390.
- Miyoshi E, Azumi K, Katou T, Ohmori Y, Nakagawa M. On the abrasion properties of steels by sand. Tetsu-to-Hagane. 1965;51:2322–2327.
- Richardson R. The maximum hardness of strained surfaces and the abrasive wear of metals and alloys. Wear. 1967;10:353–382.
- Naim M, Bahadur S. Work hardening in erosion due to single-particle impacts. Wear. 1984;98:15–26.
- Rice SL, Nowotny H, Wayne SF. Characteristics of metallic subsurface zones in sliding and impact wear. Wear. 1981;74:131–142.
- Ratia V, Miettunen I, Kuokkala VT. Surface deformation of steels in impact-abrasion: the effect of sample angle and test duration. Wear. 2013;301:94–101. Available from: http://www.sciencedirect.com/science/article/pii/S0043164813000161.
- Wilson RD, Hawk JA. Impeller wear impact-abrasive wear test. Wear. 1999;225–229(Part 2):1248–1257. Available from: http://www.sciencedirect.com/science/article/pii/S0043164899000460.
- Haiko O, Somani M, Porter D, Kantanen P, Kömi J, Ojala N, Heino V. Comparison of impact-abrasive wear characteristics and performance of direct quenched (dq) and direct quenched and partitioned (dq&p) steels. Wear. 2018;400:21–30.
- Rice SL, Nowotny H, Wayne SF. Formation of subsurface zones in impact wear. Asle Trans. 1981;24:264–268.
- Rice SL. Variations in wear resistance due to microstructural condition in high strength steel under repetitive impact. Tribol Int. 1979;12(1):25–29.
- Efremenko V, Shimizu K, Noguchi T, Efremenko A, Chabak YG. Impact–abrasive–corrosion wear of fe-based alloys: influence of microstructure and chemical composition upon wear resistance. Wear. 2013;305(1–2):155–165.
- Rastegar V, Karimi A. Surface and subsurface deformation of wear-resistant steels exposed to impact wear. J Mater Eng Perform. 2014;23:927–936.
- Haiko O, Miettunen I, Porter D, Ojala N, Ratia V, Heino V, Kemppainen A. Effect of finish rolling and quench stop temperatures on impact-abrasive wear resistance of 0.35% carbon direct-quenched steel. Tribol-Finn J Tribol. 2017;35(1–2):5–21.
- Ratia V, Rojacz H, Terva J, Valtonen K, Badisch E, Kuokkala V-T. Effect of multiple impacts on the deformation of wear-resistant steels. Tribol Lett. 2015;57(2):15.
- Hokkirigawa K, Kato K. An experimental and theoretical investigation of ploughing, cutting and wedge formation during abrasive wear. Tribol Int. 1988;21:51–57.
- Mulhearn TO, Samuels LE. The abrasion of metals: a model of the process. Wear. 1962;5:478–498. Available from: http://www.sciencedirect.com/science/article/pii/0043164862900649.
- Murray M, Mutton P, Watson J. Abrasive wear mechanisms in steels. J Lubrication Technol. 1982;104(1):9–16.
- Suh NP. The delamination theory of wear. Wear. 1973;25(1):111–124.
- Rendón J, Olsson M. Abrasive wear resistance of some commercial abrasion resistant steels evaluated by laboratory test methods. Wear. 2009;267:2055–2061.
- Ratia V. Behavior of martensitic wear resistant steels in abrasion and impact wear testing conditions. Tribologia-Finnish J Tribol. 2016;34(1–2).
- Gore GJ, Gates JD. Effect of hardness on three very different forms of wear. Wear. 1997;203:544–563. Available from: http://www.sciencedirect.com/science/article/pii/S0043164896074145.
- Hawk JA, Wilson RD, Tylczak JH, Doğan ÖN. Laboratory abrasive wear tests: investigation of test methods and alloy correlation. Wear. 1999;225–229(Part 2):1031–1042. Available from: http://www.sciencedirect.com/science/article/pii/S0043164899000423.
- Khruschov MM. Principles of abrasive wear. Wear. 1974;28:69–88. Available from: http://www.sciencedirect.com/science/article/pii/0043164874901021.
- Ratia V, Valtonen K, Kemppainen A, Kuokkala VT. High-stress abrasion and impact-abrasion testing of wear resistant steels. Tribol Online. 2013;8:152–161.
- Glazkov V, Novomeiskii YD, Savitskii K. Nature of resistance to abrasive wear. Sov Phys J. 1969;12:1441–1444.
- Everhart JO. Special wear-resisting materials for clay machinery parts. J Am Ceram Soc. 1938;21:69–72.
- Ito J. Study on abrasion resistance material against sand and slime in a rapid current of water and their hardface-welding (1st report). Welding Soc J. 1955;24:480–486.
- Ito J. Study on abrasion resistance material against sand and slime in a rapid current of water and their hardface-welding (3rd report). Welding Soc J. 1958;27:81–85.
- Moore M. The relationship between the abrasive wear resistance, hardness and microstructure of ferritic materials. Wear. 1974;28:59–68.
- Rosenberg SJ. Resistance of steels to abrasion by sand. Trans Am Soc Steel Treating. 1930;18:1093.
- Gahr KHZ. Microstructure and wear of materials: tribology series. Amsterdam;1987.
- Tabor D. Mohs's hardness scale-a physical interpretation. Proc Phys Soc. Section B. 1954;67(3):249.
- Bayer RG. Fundamentals of wear failures: ASM handbook international. 2002. p. 901–905. DOI:10.31399/asm.hb.v11.a0003558.
- Lindroos M, Valtonen K, Kemppainen A, Laukkanen A, Holmberg K, Kuokkala V. Wear behavior and work hardening of high strength steels in high stress abrasion. Wear. 2015;322–323:32–40. Available from: http://www.sciencedirect.com/science/article/pii/S0043164814003238.
- Hutchings IM, Shipway P. 6 – Wear by hard particles. In: Tribology. 2nd ed. Hutchings IM, Shipway P, editors. Butterworth-Heinemann; 2017. p. 165–236. Available from: http://www.sciencedirect.com/science/article/pii/B9780081009109000064.
- Rendón J, Olsson M. Abrasive wear resistance of some commercial abrasion resistant steels evaluated by laboratory test methods. Wear. 2009;267:2055–2061. Available from: http://www.sciencedirect.com/science/article/pii/S0043164809004827.
- Mutton PJ, Watson JD. Some effects of microstructure on the abrasion resistance of metals. Wear. 1978;48:385–398. Available from: http://www.sciencedirect.com/science/article/pii/004316487890234X.
- Al-Rubaie KS. Equivalent hardness concept and two-body abrasion of iron-base alloys. Wear. 2000;243:92–100.
- Sin H, Saka N, Suh N. Abrasive wear mechanisms and the grit size effect. Wear. 1979;55:163–190.
- Gahr KHZ, Doane VD. Optimizing fracture toughness and abrasion resistance in white cast irons. Metallur Trans A. 1980;11:613–620.
- Moore MA. Abrasive wear. Int J Mater Eng Appl. 1978;1:97–111. Available from: http://www.sciencedirect.com/science/article/pii/S0141553078900547.
- Xu L, Vose C, John DS. Abrasive wear study of selected white cast irons as liner materials for the mining industry. Wear. 1993;162:820–832. Available from: http://www.sciencedirect.com/science/article/pii/004316489390083X.
- Sciezka SF, Filipowicz K. An integrated testing method for cermet abrasion resistance and fracture toughness evaluation. Wear. 1998;216:202–212. Available from: http://www.sciencedirect.com/science/article/pii/S0043164897001683.
- Bayer RG. Fundamentals of wear failures. Materials Park, OH: ASM International; 2002. p. 901–905.
- Torrance AA. Modelling abrasive wear. Wear. 2005;258:281–293. Available from: http://www.sciencedirect.com/science/article/pii/S0043164804002595.
- Uetz H, Föhl J. Wear as an energy transformation process. Wear. 1978;49:253–264.
- Hornbogen E. The role of fracture toughness in the wear of metals. Wear. 1975;33:251–259.
- Moore M, Douthwaite R. Plastic deformation below worn surfaces. Metallur Trans A. 1976;7:1833–1839.
- Popov V, Nagornyi P, Shumikin A, Guk V, Popov S. Relation between the energy capacity of metals and alloys and their resistance to abrasive wear. Strength Mater. 1971;3:1114–1119.
- Zum Gahr K-H, Eldis GT. Abrasive wear of white cast irons. Wear. 1980;64:175–194.
- Leiro A, Vuorinen E, Sundin KG, Prakash B, Sourmail T, Smanio V, Caballero FG, Mateo CG, Elvira R. Wear of nano-structured carbide-free bainitic steels under dry rolling–sliding conditions. Wear. 2013;298:42–47.
- Garrison, W Jr, Garriga R. Ductility and the abrasive wear of an ultrahigh strength steel. Wear. 1983;85:347–360.
- Ojala N, Valtonen K, Heino V, Kallio M, Aaltonen J, Siitonen P, Kuokkala VT. Effects of composition and microstructure on the abrasive wear performance of quenched wear resistant steels. wear. 2014;317:225–232. Available from: http://linkinghub.elsevier.com/retrieve/pii/S0043164814001859.
- Nakayo H, Kuniji H. Surfaces of carbon steel worn by foundry sand. Casting. 1964;36:102–111.
- Chattopadhyay C, Sangal S, Mondal K, Garg A. Improved wear resistance of medium carbon microalloyed bainitic steels. Wear. 2012;289:168–179.
- Rice SL. The role of microstructure in the impact wear of two aluminum alloys. Wear. 1979;54(2):291–301.
- Wayne S, Rice S, Minakawa K, Nowotny H. The role of microstructure in the wear of selected steels. Wear. 1983;85(1):93–106.
- Hu F, Wu K, Hodgson P. Effect of retained austenite on wear resistance of nanostructured dual phase steels. Mater Sci Technol. 2016;32(1):40–48.
- Yang G, Garrison, W. Jr. A comparison of microstructural effects on two-body and three-body abrasive wear. Wear. 1989;129(1):93–103.
- Jian-Min T, Yi-Zhong Z, Tian-Yi S, Hai-Jin D. The influence of retained austenite in high chromium cast iron on impact-abrasive wear. Wear. 1990;135(2):217–226.
- Cheng L, Wu T, Hu C. The role of microstructural features in abrasive wear of a d-2 tool steel. J Mater Sci. 1988;23(5):1610–1614.
- Siepak J. The influence of contact stress on the wear of a carburized steel case with a high content of retained austenite. Wear. 1982;80(3):301–305.
- Jun-Tong X, Qing-De Z, Shi-Hui L, Guang-Shun S. Influence of retained austenite on the wear resistance of high chromium cast iron under various impact loads. Wear. 1993;162:83–88.
- Da Silva V, Canale L, Spinelli D, Bose-Filho W, Crnkovic O. Influence of retained austenite on short fatigue crack growth and wear resistance of case carburised steel. J Mater Eng Perform. 1999;8(5):543–548.
- Chang L. The rolling/sliding wear performance of high silicon carbide-free bainitic steels. Wear. 2005;258(5-6):730–743.
- Kim H-J, Kweon Y-G. The effects of retained austenite on dry sliding wear behavior of carburized steels. Wear. 1996;193(1):8–15.
- Ratia V, Miettunen I, Kuokkala VT. Surface deformation of steels in impact-abrasion: the effect of sample angle and test duration. Wear. 2013;301:94–101.
- Wang W, Song R, Peng S, Pei Z. Multiphase steel with improved impact-abrasive wear resistance in comparison with conventional hadfield steel. Mater Des. 2016;105:96–105.
- Yan W, Fang L, Sun K, Xu Y. Effect of surface work hardening on wear behavior of hadfield steel. Mater Sci Eng: A. 2007;460:542–549.
- Chen H, Zhao D, Wang Q, Qiang Y, Qi J. Effects of impact energy on the wear resistance and work hardening mechanism of medium manganese austenitic steel. Friction. 2017;5(4):447–454.
- Jin J-E, Lee Y-K. Strain hardening behavior of a fe–18mn–0.6 c–1.5 al twip steel. Mater Sci Eng: A. 2009;527(1-2):157–161.
- Hernandez S, Leiro A, Ripoll MR, Vuorinen E, Sundin KG, Prakash B. High temperature three-body abrasive wear of 0.25c 1.42si steel with carbide free bainitic (cfb) and martensitic microstructures. Wear. 2016;360:21–28. Available from: http://www.sciencedirect.com/science/article/pii/S0043164816300503.
- Bhadeshia HKDH. Bainite in steels: theory and practice. Wakefield: Charlesworth Press; 2015.
- Bakshi SD, Leiro A, Prakash B, Bhadeshia H. Dry rolling/sliding wear of nanostructured bainite. Wear. 2014;316:70–78.
- Shipway P, Wood S, Dent A. The hardness and sliding wear behaviour of a bainitic steel. Wear. 1997;203:196–205.
- Devanathan R, Clayton P. Rolling-sliding wear behavior of three bainitic steels. Wear. 1991;151:255–267. Available from: http://www.sciencedirect.com/science/article/pii/004316489190253Q.
- Ambrosini L, Bahadur S. Erosion of aisi 4140 steel. Wear. 1987;117:37–48.
- Vuorinen E, Ojala N, Heino V, Rau C, Gahm C. Erosive and abrasive wear performance of carbide free bainitic steels–comparison of field and laboratory experiments. Tribol Int. 2016;98:108–115. Available from: http://www.sciencedirect.com/science/article/pii/S0301679X16001006.
- Gola A, Ghadamgahi M, Ooi S. Microstructure evolution of carbide-free bainitic steels under abrasive wear conditions. Wear. 2017;376:975–982.
- Vuorinen E, Ojala N, Heino V, Rau C, Gahm C. Erosive and abrasive wear performance of carbide free bainitic steels–comparison of field and laboratory experiments. Tribol Int. 2016;98:108–115.
- Chang LC. The rolling and sliding wear performance of high silicon carbide-free bainitic steels. Wear. 2005;258:730–743. Available from: http://www.sciencedirect.com/science/article/pii/S0043164804003448.
- Ninham A. The effect of mechanical properties on erosion. Wear. 1988;121:307–324.
- El-Rakayby A, Mills B. The role of primary carbides in the wear of high speed steels. Wear. 1986;112:327–340.
- Aksoy M, Karamis M, Evin E. An evaluation of the wear behaviour of a dual-phase low-carbon steel. Wear. 1996;193:248–252.
- Sare I, Mardel J, Hill A. Wear-resistant metallic and elastomeric materials in the mining and mineral processing industries–an overview. Wear. 2001;250:1–10.
- Xu L, Wei S, Xiao F, Zhou H, Zhang G, Li J. Effects of carbides on abrasive wear properties and failure behaviours of high speed steels with different alloy element content. Wear. 2017;376:968–974.
- Kato K, Adachi K. Chap 7. Wear mechanisms: mechanics & materials science. CRC Press; 2000. Available from: http://home.ufam.edu.br/berti/nanomateriais/0495296023MaterialsEnginee.pdf.
- Wen E, Song R, Xiong W. Effect of tempering temperature on microstructures and wear behavior of a 500 hb grade wear-resistant steel. Metals. 2019;9(1):45.
- Deng X, Fu T, Wang Z, Misra R, Wang G. Epsilon carbide precipitation and wear behaviour of low alloy wear resistant steels. Mater Sci Technol. 2016;32:320–327.
- Salesky W, Thomas G. Medium carbon steel alloy design for wear applications. Wear. 1982;75:21–40.
- Clarebrough L, Hargreaves M, Loretto M. The influence of grain size on the stored energy and mechanical properties of copper. Acta Metallur. 1958;6:725–735.
- Moore M, Richardson R, Attwood D. The limiting strength of worn metal surfaces. Metallur Trans. 1972;3:2485–2491.
- Sik Cheoul K, Jai Young L, Dae Youg K. Abrasion resistance study of austenite high mn steel. J Mater Sci. 1976;14:241–249.
- Kashcheev V. Some aspects of improving abrasive resistance. Wear. 1983;89:265–272.
- Gündüz S, Kaçar R, Soykan HS. Wear behaviour of forging steels with different microstructure during dry sliding. Tribol Int. 2008;41:348–355.
- Prawoto Y, Jasmawati N, Sumeru K. Effect of prior austenite grain size on the morphology and mechanical properties of martensite in medium carbon steel. J Mater Sci Technol. 2012;28(5):461–466.
- Chatterjee S, Bhadeshia H. Trip-assisted steels: cracking of high-carbon martensite. Mater Sci Technol. 2006;22:645–649.
- Kömi J, Karjalainen P, Porter D. Direct-quenched structural steels. In: Encyclopedia of iron, steel their alloy. Boca Raton: CRC Press; 2016. p. 1109–1125. DOI:10.1081/E-EISA.
- Hanamura T, Torizuka S, Tamura S, Enokida S, Takechi H. i.. Effect of austenite grain size on transformation behavior, microstructure and mechanical proper ties of 0.1 C–5Mn martensitic steel. ISIJ Int. 2013;53:2218–2225.
- Hidalgo J, Santofimia MJ. Effect of prior austenite grain size refinement by thermal cycling on the microstructural features of as-quenched lath martensite. Metall Mater Trans A. 2016;47:5288–5301.
- Lan H, Du L, Li Q, Qiu C, Li J, Misra R. Improvement of strength-toughness combination in austempered low carbon bainitic steel: the key role of refining prior austenite grain size. J Alloys Compd. 2017;710:702–710.
- Bakshi SD. Wear of fine pearlite, nanostructured bainite and martensite [PhD Thesis]. 2016.
- MASTEEL MAS AR Abrasion Resistant Steel, URL Date: 2017-06-11. Available from: https://masteel.co.uk/2017/01/31/mas500-ar/.
- Voestalpine Durostata wear resistance steels, [cited 2017 June 11]. Available from: http://www.voestalpine.com/stahl/en/Products/Brand-names/durostat-R.
- Chapelsteel Wear resistance steels, [cited 2017 June 11]. Available from: https://www.chapelsteel.com/ar400-ar360.html, journal=Chapel Steel.
- Matweb Wear resistance steels, [cited 2017 June 11]. Available from: http://www.matweb.com/.
- Dillinger Wear resistance steels, [cited 2017 June 11]. Available from: https://www.dillinger.de.
- SSAB Wear resistance steels, [cited 2017 June 11]. Available from: http://www.ssab.co.uk.
- Thyssenkrupp: Wear resistance steels, [cited 2017 June 11]. Available from: https://www.thyssenkrupp-steel.com/en/products/heavy-plate/wear-resistant-steel/xar/productpage-xar.html.
- Quard400 Wear resistance steels, [cited 2017 June 11]. Available from: https://jola.nl.
- Wear resistance steels, [cited 2017 June 11]. Available from: https://www.tatasteeleurope.com.
- C. Rimando Everhard steel, [cited 2017 June 11]. Available from: http://www.australiansteel.com.au/wear-plates/everhard-steel/.
- Abrasion resistant steel, [cited 2017 June 11]. Available from: https://www.brownmac.com/en/products/abrasion-resistant-steel.
- Wear resistance steels, [cited 2017 June 11]. Available from: http://www.abrexplates.com/.
- Kalousek J, Fegredo DM, Laufer EE. The wear resistance and worn metallography of pearlite, bainite and tempered martensite rail steel microstructures of high hardness. Wear. 1985;105:199–222. Available from: http://www.sciencedirect.com/science/article/pii/0043164885900687.
- Clayton P, Devanathan R. Rolling/sliding wear behavior of a chromium-molybdenum rail steel in pearlitic and bainitic conditions. Wear. 1992;156:121–131. Available from: http://www.sciencedirect.com/science/article/pii/0043164892901482.
- Bhadeshia HKDH, Materials IO. Bainite in steels. Institute of Materials London; 1992.
- Yang YL, Yang CH, Lin SN, Chen CH, Tsai WT. Effects of Si and its content on the scale formation on hot-rolled steel strips. Mater Chem Phys. 2008;112:566–571.
- Hanguang F, Qiang X, Li Y. A study of the microstructures and properties of Fe-V-W-Mo alloy modified by rare earth. Mater Sci Eng: A. 2005;395:281–287. Available from: http://www.sciencedirect.com/science/article/pii/S0921509305000055.
- Bhakat A, Mishra A, Mishra N. Characterization of wear and metallurgical properties for development of agricultural grade steel suitable in specific soil conditions. Wear. 2007;263:228–233.
- Bhakat A, Mishra A, Mishra N, Jha S. Metallurgical life cycle assessment through prediction of wear for agricultural grade steel. Wear. 2004;257:338–346.
- Xu J, Yang YT. Comprehensive influence of Cr and Si on hardness and wear resistance of cold roll steel. In: Advanced materials research. Vol. 476, Trans Tech Publ; 2012. p. 334–339. Available from: https://doi.org/10.4028/www.scientific.net/AMR.476-478.334.
- Kang YJ, Oh JC, Lee HC, Lee S. Effects of carbon and chromium additions on the wear resistance and surface roughness of cast high-speed steel rolls. Metallur Mater Trans A. 2001;32(10):2515–2525.
- Singh K, Khatirkar RK, Sapate SG. Microstructure evolution and abrasive wear behavior of D2 steel. Wear. 2015;328:206–216.
- Peet M, Bhadeshia H. Development of very hard and tough steel ever produced. Forthcoming 2018.
- Bakshi SD, Shipway PH, Bhadeshia HKDH. Three-body abrasive wear of fine pearlite, nanostructured bainite and martensite. Wear. 2013;308:46–53. Available from: http://www.sciencedirect.com/science/article/pii/S0043164813004985.