Novel approach for fabrication and characterisation of porosity-graded material

References

• Momeni SA, Asghari M. The second strain gradient functionally graded beam formulation. Compos Struct. 2018;188:15–24. doi: 10.1016/j.compstruct.2017.12.046
   Web of Science ®Google Scholar
• Naebe M, Shirvanimoghaddam K. Functionally graded materials: a review of fabrication and properties. Appl Mater Today. 2016;5:223–245. doi: 10.1016/j.apmt.2016.10.001
   Web of Science ®Google Scholar
• Thai CH, Ferreira AJM, Nguyen-Xuan H. Isogeometric analysis of size-dependent isotropic and sandwich functionally graded microplates based on modified strain gradient elasticity theory. Compos Struct. 2018;192:274–288. doi: 10.1016/j.compstruct.2018.02.060
   Web of Science ®Google Scholar
• Yan M, Peng X, Ma T. Microstructures of Ni-ZrO2 functionally graded materials fabricated via slip casting under gradient magnetic fields. J Alloys Compd. 2009;479:750–754. doi: 10.1016/j.jallcom.2009.01.042
   Web of Science ®Google Scholar
• Aydogdu M, Taskin V. Free vibration analysis of functionally graded beams with simply supported edges. Mater Des. 2007;28:1651–1656. doi: 10.1016/j.matdes.2006.02.007
   Web of Science ®Google Scholar
• Zhou C, Li L, Wang J, et al. A novel approach for fabrication of functionally graded W/Cu composites via microwave processing. J Alloys Compd. 2018;743:383–387. doi: 10.1016/j.jallcom.2018.01.372
   Web of Science ®Google Scholar
• Chirita G, Soares D, Silva FS. Advantages of the centrifugal casting technique for the production of structural components with Al–Si alloys. Mater Des. 2008;28:20–27. doi: 10.1016/j.matdes.2006.12.011
   Google Scholar
• Gao JW, Wang CY. Modeling the solidification of functionally graded materials by centrifugal casting. Mater Sci Eng A. 2000;292:207–215. doi: 10.1016/S0921-5093(00)01014-5
   Web of Science ®Google Scholar
• Reddy J, Kim J. A nonlinear modified couple stress-based third-order theory of functionally graded plates. Compos Struct. 2012;94:1128–1143. doi: 10.1016/j.compstruct.2011.10.006
   Web of Science ®Google Scholar
• Ying J, Lü C, Chen W. Two-dimensional elasticity solutions for functionally graded beams resting on elastic foundations. Compos Struct. 2008;84:209–219. doi: 10.1016/j.compstruct.2007.07.004
   Web of Science ®Google Scholar
• Xiang X, Wang XL, Zhang GK, et al. Preparation technique and alloying effect of aluminide coatings as tritium permeation barriers: A review. Int J Hydrogen Energ. 2015;40(9):3697–3707. doi: 10.1016/j.ijhydene.2015.01.052
   Web of Science ®Google Scholar
• Alidokht SA, Abdollah-zadeh A, Soleymani S, et al. Evaluation of microstructure and wear behavior of friction stir processed cast aluminum alloy. Mater Charact. 2012;63:90–97. doi: 10.1016/j.matchar.2011.11.007
   Web of Science ®Google Scholar
• He SY, Zhang Y, Dai G, et al. Preparation of density-graded aluminum foam. Mater Sci Eng A. 2018;618(17):496–499.
   Google Scholar
• Shaik M, Khanra AK, Saha BP. Processing of sintered and CVD coated SiC/CNFs thin composite tubes. Mater Chem Phys. 2018;220:225–232. doi: 10.1016/j.matchemphys.2018.08.086
   Web of Science ®Google Scholar
• Wang X, Chu XY, Zhao HF, et al. Controllable growth of functional gradient ZnO material using chemical vapor deposition. Integr Ferroelectr. 2014;151:1–6. doi: 10.1080/10584587.2014.898552
   Web of Science ®Google Scholar
• Ma ZY, Pilchak AL, Juhas MC, et al. Microstructural refinement and property enhancement of cast light alloys via friction stir processing. Scr Mater. 2008;58:361–366. doi: 10.1016/j.scriptamat.2007.09.062
   Web of Science ®Google Scholar
• Pan E. Exact solution for functionally graded anisotropic elastic composite laminates. J Compos Mater. 2003;37:1903–1920. doi: 10.1177/002199803035565
   Web of Science ®Google Scholar
• Cannillo V, Lusvarghi L, Sola A. ‘Production and characterization of plasma-sprayed TiO2–hydroxyapatite functionally graded coatings. J Eur Ceram Soc. 2008;28:2161–2169. doi: 10.1016/j.jeurceramsoc.2008.02.026
   Web of Science ®Google Scholar
• Yeo JG, Jung YG, Choi SC. Design and microstructure of ZrO2/SUS316 functionally graded materials by tape casting. Mater Lett. 1998;37(6):304–311. doi: 10.1016/S0167-577X(98)00111-6
   Web of Science ®Google Scholar
• Andertova J, Tlaskal R, Maryska M, et al. Functional gradient alumina ceramic materials – heat treatment of bodies prepared by slip casting method. J Eur Ceram Soc. 2007;27(2–3):1325–1331. doi: 10.1016/j.jeurceramsoc.2006.04.088
   Web of Science ®Google Scholar
• Choy KL. Chemical vapour deposition of coatings. Prog Mater Sci. 2003;48(2):57–170. doi: 10.1016/S0079-6425(01)00009-3
   Web of Science ®Google Scholar
• Ivosevic M, Knight R, Kalidindi SR, et al. Adhesive/cohesive properties of thermally sprayed functionally graded coatings for polymer matrix composites. J Therm Spray Technol. 2005;14(1):45–51. doi: 10.1361/10599630522765
   Web of Science ®Google Scholar
• Acikbas NC, Suvaci E, Mandal H. Fabrication of functionally graded SiAlON ceramics by tape casting. J Am Ceram Soc. 2006;89(10):3255–3257. doi: 10.1111/j.1551-2916.2006.01059.x
   Web of Science ®Google Scholar
• Drenchev L, Sobczak J, Malinov S, et al. Numerical simulation of macrostructure formation in centrifugal casting of particle reinforced metal matrix composites. Part 2: simulations and practical applications. Model Simul Mater Sci Eng A. 2003;11:651–674. doi: 10.1088/0965-0393/11/4/315
   Web of Science ®Google Scholar
• Qiao ZH, Raethel J, Berger LM, et al. Investigation of binderless WC–TiC–Cr3C2 hard materials prepared by spark plasma sintering (SPS). Int J Refract Met Hard Mater. 2013;38:7–14. doi: 10.1016/j.ijrmhm.2012.12.002
   Web of Science ®Google Scholar
• Nemat-Alla MM, Ata MH, Bayoumi MR, et al. Powder metallurgical fabrication and microstructural investigations of aluminum/steel functionally graded material. Mater Sci Appl. 2011;2:1708–1718.
   Google Scholar
• Jin G, Takeuchi M, Honda S, et al. Properties of multilayered mullite/Mo functionally graded materials fabricated by powder metallurgy processing. Mater Chem Phys. 2005;89(2–3):238–243. doi: 10.1016/j.matchemphys.2004.03.031
   Web of Science ®Google Scholar
• Wen XZ, Huang J, Ke FW, et al. Preliminary study on shielding performance of debris shield with the rear wall combining light materials and an aluminum plate. Int J Impact Eng. 2019;124:31–36. doi: 10.1016/j.ijimpeng.2018.10.006
   Web of Science ®Google Scholar
• Chu CL, Zhu JC, Yin ZD, et al. Hydroxyapatite–Ti functionally graded biomaterial fabricated by powder metallurgy. Mater Sci Eng A. 1999;271:95–100. doi: 10.1016/S0921-5093(99)00152-5
   Web of Science ®Google Scholar
• Ubeyli M, Balci E, Sarikan B, et al. The ballistic performance of SiC–AA7075 functionally graded composite produced by powder metallurgy. Mater Des. 2014;56:31–36. doi: 10.1016/j.matdes.2013.10.092
   Web of Science ®Google Scholar
• Kadkhodapour J, Montazerian H, Samadi M, et al. Plastic deformation and compressive mechanical properties of hollow sphere aluminum foams produced by space holder technique. Mater Des. 2015;83:352–362. doi: 10.1016/j.matdes.2015.05.086
   Web of Science ®Google Scholar
• Liu C, Liu Y, Yang YL, et al. New method for preparing micron porous aluminum via powder metallurgy. Mater Sci Tech-Load. 2018;34(11):1295–1302. doi: 10.1080/02670836.2018.1426677
   Web of Science ®Google Scholar
• Chen S, Bourham M, Rabiei A. Neutrons attenuation on composite metal foams and hybrid open-cell Al foam. Radiat Phys Chem. 2015;109:27–39. doi: 10.1016/j.radphyschem.2014.11.003
   Web of Science ®Google Scholar
• Májlinger K, Orbulov IN. Characteristic compressive properties of hybrid metal matrix syntactic foams. Mater Sci Eng A. 2014;606:248–256. doi: 10.1016/j.msea.2014.03.100
   Web of Science ®Google Scholar
• Hangaia Y, Zushidaa K, Kuwazurub O, et al. Large-scale aluminum foam plate fabricated by enhanced friction powder compaction process based on sintering and dissolution process. J Mater. Pro. Technol. 2014;214:1721–1727. doi: 10.1016/j.jmatprotec.2014.03.021
   Web of Science ®Google Scholar
• Surace R, Filippis LAC, Ludovico AD, et al. ‘Influence of processing parameters on aluminum foam produced by space holder technique. Mater. Des. 2009;30:1878–1885. doi: 10.1016/j.matdes.2008.09.027
   Web of Science ®Google Scholar
• Lumley RN, Sercombe TB, Schaffer GB. Surface oxide and the role of magnesium during the sintering of aluminum. Metall Trans A. 1990;30:457–463. doi: 10.1007/s11661-999-0335-y
   Google Scholar
• Shen HS, Wang ZX. Assessment of Voigt and Mori–Tanaka models for vibration analysis of functionally graded plates. Compos. Struct. 2012;94(7):2197–2208. doi: 10.1016/j.compstruct.2012.02.018
   Web of Science ®Google Scholar