The role of yttrium modifying A357 alloy with sand casting

References

• Do Lee C. Variability in the tensile properties of squeeze-cast Al–Si–Cu–Mg alloy. Mater Sci Eng A. 2008;488:296. doi: 10.1016/j.msea.2007.11.014
   Web of Science ®Google Scholar
• Guang Liu S, Biao Luo C, Ai Li G, et al. Effect of pressurizing speed on filling behavior of gradual expansion structure in low pressure casting of ZL205A alloy. China Foundry. 2018;15:276. doi: 10.1007/s41230-018-8044-z
   Web of Science ®Google Scholar
• Liang C, Chen ZH, Huang ZY, et al. Optimizing microstructures and mechanical properties of hypereutectic Al-18%Si alloy via manipulating its parent liquid state. Mater Sci Eng A. 2017;690:387. doi: 10.1016/j.msea.2017.03.016
   Web of Science ®Google Scholar
• Xu C, Xiao W, Zheng R, et al. The synergic effects of Sc and Zr on the microstructure and mechanical properties of Al–Si–Mg alloy. Mater Des. 2015;88:485. doi: 10.1016/j.matdes.2015.09.045
   Web of Science ®Google Scholar
• Mohamed AMA, Samuel AM, Samuel FH, et al. Influence of additives on the microstructure and tensile properties of near-eutectic Al–10.8%Si cast alloy. Mater Des. 2009;30:3943. doi: 10.1016/j.matdes.2009.05.042
   Web of Science ®Google Scholar
• Mousavi GS, Emamy M, Rassizadehghani J. The effect of mischmetal and heat treatment on the microstructure and tensile properties of A357 Al–Si casting alloy. Mater Sci Eng A. 2012;556:573. doi: 10.1016/j.msea.2012.07.029
   Web of Science ®Google Scholar
• Asensio-Lozano J, Suarez-Peña B. Effect of the addition of refiners and/or modifiers on the microstructure of die cast Al–12Si alloys. Scr Mater. 2006;54:943. doi: 10.1016/j.scriptamat.2005.10.067
   Web of Science ®Google Scholar
• Lumley R. The development of high strength and ductility in high-pressure die-cast Al-Si-Mg alloys from secondary sources. Jom. 2019;71:382. doi: 10.1007/s11837-018-3121-8
   Web of Science ®Google Scholar
• Yassar RS, Field DP, Weiland H. The effect of predeformation on the β′′ and β′ precipitates and the role of Q′ phase in an Al–Mg–Si alloy; AA6022. Scr Mater. 2005;53:299. doi: 10.1016/j.scriptamat.2005.04.013
   Web of Science ®Google Scholar
• Lin YC, Luo SC, Huang J, et al. Effects of solution treatment on microstructures and micro-hardness of a Sr-modified Al-Si-Mg alloy. Mater Sci Eng A. 2018;725:530. doi: 10.1016/j.msea.2018.04.049
   Web of Science ®Google Scholar
• Lados DA. Fatigue Crack Propagation mechanisms of Long and small Cracks in Al-Si-Mg and Al-Mg cast Alloys. Mater Sci Forum. 2009;618–619:563. doi: 10.4028/www.scientific.net/MSF.618-619.563
   Google Scholar
• McDowell Y, Horstemeyer F, Gall F. Fract Eng Mater Struct. 2003;23:159.
   Google Scholar
• Fan J, McDowell DL, Horstemeyer MF, et al. Computational micromechanics analysis of cyclic crack-tip behavior for microstructurally small cracks in dual-phase Al–Si alloys. Eng Fract Mech. 2001;68:1687. doi: 10.1016/S0013-7944(01)00064-9
   Web of Science ®Google Scholar
• Han SW, Kumai S, Sato A. Effects of solidification structure on short fatigue crack growth in Al–7%Si–0.4%Mg alloy castings. Mater Sci Eng A. 2002;332:56. doi: 10.1016/S0921-5093(01)01713-0
   Web of Science ®Google Scholar
• Lu L, Nogita K, Dahle AK. Combining Sr and Na additions in hypoeutectic Al–Si foundry alloys. Mater Sci Eng A. 2005;399:244. doi: 10.1016/j.msea.2005.03.091
   Web of Science ®Google Scholar
• Timpel M, Wanderka N, Vinod Kumar GS, et al. Microstructural investigation of Sr-modified Al–15wt%Si alloys in the range from micrometer to atomic scale. Ultramicroscopy. 2011;111:695. doi: 10.1016/j.ultramic.2010.12.023
   PubMed Web of Science ®Google Scholar
• Guangming D. Modification of Cast Al-Si Alloy with Sr. Special Casting & Nonferrous Alloys, (2005).
   Google Scholar
• Fat-Halla N. Structural modification of Al-Si eutectic alloy by Sr and its effect on tensile and fracture characteristics. J Mater Sci. 1989;24:2488. doi: 10.1007/BF01174517
   Web of Science ®Google Scholar
• Mi G-F, Zhu Z-J, Wang H-W, et al. Zhuzao Jishu/Foundry Technol. 2006;27.
   Google Scholar
• Flood SC, Hunt JD. Modification of Al-Si eutectic alloys with Na. Met Sci. 2010;15:287. doi: 10.1179/030634581790426813
   Google Scholar
• Shu-Sen W, Xiao-Lin T, Fukuda Y, et al. Trans Nonferrous Met Soc China. 2003;13(6):1285–1289.
   Web of Science ®Google Scholar
• Li JH, Barrirero J, Engstler M, et al. Nucleation and growth of eutectic Si in Al-Si Alloys with Na addition. Metall Mater Trans A Phys Metall Mater Sci. 2015;46:1300. doi: 10.1007/s11661-014-2702-6
   Google Scholar
• Fatahalla N, Hafiz M, Abdulkhalek M. J Mater Sci. 1999;34(14):3555–3564. doi: 10.1023/A:1004626425326
   Web of Science ®Google Scholar
• Uzun O, Yilmaz F, Kölemen U, et al. Sb effect on micro structural and mechanical properties of rapidly solidified Al–12Si alloy. J Alloys Compd. 2011;509:21. doi: 10.1016/j.jallcom.2010.09.037
   Web of Science ®Google Scholar
• Farahany S, Ourdjini A, Idrsi MH, et al. Evaluation of the effect of Bi, Sb, Sr and cooling condition on eutectic phases in an Al–Si–Cu alloy (ADC12) by in situ thermal analysis. Thermochim Acta. 2013;559:59. doi: 10.1016/j.tca.2013.02.024
   Web of Science ®Google Scholar
• Boontein S, Srisukhumbovornchai N, Kajornchaiyakul J, et al. Reduction in secondary dendrite arm spacing in cast aluminium alloy A356 by Sb addition. Int J Cast Met Res. 2011;24:108. doi: 10.1179/1743133610Y.0000000007
   Web of Science ®Google Scholar
• Liu L, Zhou L, Fu Z, et al. Effect of trace yttrium addition on the microstructure and tensile properties of recycled Al–7Si–0.3Mg–1.0Fe casting alloys. Mater Sci Eng A. 2016;666:165. doi: 10.1016/j.msea.2016.04.036
   Web of Science ®Google Scholar
• Kang HS, Yoon WY, Kim KH, et al. Effective parameter for the selection of modifying agent for Al–Si alloy. Mater Sci Eng A. 2007;449–451:334. doi: 10.1016/j.msea.2006.02.363
   Web of Science ®Google Scholar
• Nogita K, Knuutinen A, McDonald SD, et al. Mechanisms of eutectic solidification in Al–Si alloys modified with Ba, Ca, Y and Yb. J Light Met. 2001;1:219. doi: 10.1016/S1471-5317(02)00005-6
   Google Scholar
• Bao LI, Hongwei W, Zunjie WEI. 47 (2009).
   Google Scholar
• Li Q, Li B, Li J, et al. Effect of yttrium addition on the microstructures and mechanical properties of hypereutectic Al-20Si alloy. Mater Sci Eng A. 2018;722:47. doi: 10.1016/j.msea.2018.03.015
   Web of Science ®Google Scholar
• Jia P, Sheng M, Leng J, et al. JOM. 2014;67:330.
   Web of Science ®Google Scholar
• De-Giovanni M, Alam T, Banerjee R, et al. 3D Atom Probe Tomography study on segregation of yttrium in modified Al-Si Alloys. JOM. 2018;70:1765. doi: 10.1007/s11837-018-2909-x
   Web of Science ®Google Scholar
• Li B, Wang H, Jie J, et al. Effects of yttrium and heat treatment on the microstructure and tensile properties of Al–7.5Si–0.5Mg alloy. Mater Des. 2011;32:1617. doi: 10.1016/j.matdes.2010.08.040
   Web of Science ®Google Scholar
• Hellawell A, Lu S-Z. The mechanism of silicon modification in aluminum-silicon alloys: impurity induced twinning. Metall Trans A. 1987;18:1721. doi: 10.1007/BF02646204
   Web of Science ®Google Scholar
• Hamilton DR, Seidensticker RG. Propagation mechanism of Germanium dendrites. J Appl Phys. 1960;31:1165. doi: 10.1063/1.1735796
   Web of Science ®Google Scholar
• Shamsuzzoha M, Hogan LM, Smith DJ, et al. A transmission and high-resolution electron microscope study of cozonally twinned growth of eutectic silicon in unmodified Al-Si alloys. J Cryst Growth. 1991;112(4):635–643. doi: 10.1016/0022-0248(91)90119-P
   Web of Science ®Google Scholar
• Shamsuzzoha M, Hogan LM. Crystal morphology of unmodified aluminium-silicon eutectic microstructures. J Cryst Growth. 1986;76:429. doi: 10.1016/0022-0248(86)90390-8
   Web of Science ®Google Scholar
• Mao F, Yan G, Xuan Z, et al. Effect of Eu addition on the microstructures and mechanical properties of A356 aluminum alloys. J Alloys Compd. 2015;650:896. doi: 10.1016/j.jallcom.2015.06.266
   Web of Science ®Google Scholar
• Wang QG. Microstructural effects on the tensile and fracture behavior of aluminum casting alloys A356/357. Metall Mater Trans A Phys Metall Mater Sci. 2003;34:2887. doi: 10.1007/s11661-003-0189-7
   Google Scholar
• Chang J, Moon I, Choi C. J Mater Sci. 1998;33:5015. doi: 10.1023/A:1004463125340
   Web of Science ®Google Scholar
• Dahle AK. Formation of Eutectic in Hypoeutectic Al-Si Alloys and Its Effect on Porosity Formation.
   Google Scholar
• Heiberg G, Arnberg L. Investigation of the microstructure of the Al–Si eutectic in binary aluminium–7 wt% silicon alloys by electron backscatter diffraction (EBSD). J Light Met. 2001;1:43. doi: 10.1016/S1471-5317(00)00005-5
   Google Scholar