Ferrite recrystallisation and intercritical annealing of cold-rolled low alloy medium carbon steel

References

• Smith WF. Structure and properties of engineering alloys. New York (NY): McGraw-Hill; 1993.
   Google Scholar
• Campbell FC. Elements of metallurgy and engineering alloys. Materials Park (OH): ASM International; 2008.
   Google Scholar
• Ebrahimi GR, Momeni A, Kazemi S, et al. Flow curves, dynamic recrystallization and precipitation in a medium carbon low alloy steel. Vacuum. 2017;142:135–145. doi: 10.1016/j.vacuum.2017.05.010
   Web of Science ®Google Scholar
• Cabrera JM, Jonas JJ, Prado JM. Flow behaviour of medium carbon microalloyed steel under hot working conditions. Mater Sci Tech. 1996;12:579–585. doi: 10.1179/mst.1996.12.7.579
   Web of Science ®Google Scholar
• Zhang C, Zhang L, Xu Q, et al. The kinetics and cellular automaton modeling of dynamic recrystallization behavior of a medium carbon Cr-Ni-Mo alloyed steel in hot working process. Mater Sci Eng A. 2016;678:33–43. doi: 10.1016/j.msea.2016.09.056
   Web of Science ®Google Scholar
• Gu SD, Zhang LW, Ruan JH, et al. Constitutive modeling of dynamic recrystallization behavior and processing map of 38MnVS6 non-quenched steel. J Mater Eng Perform. 2013;23:1062–1068. doi: 10.1007/s11665-013-0808-4
   Web of Science ®Google Scholar
• Chen MS, Yuan WQ, Lin YC, et al. Modeling and simulation of dynamic recrystallization behavior for 42CrMo steel by an extended cellular automaton method. Vacuum. 2017;146:142–151. doi: 10.1016/j.vacuum.2017.09.041
   Web of Science ®Google Scholar
• Wang Z, Liu X, Xie F, et al. Dynamic recrystallization behavior and critical strain of 51CrV4 high-strength spring steel during hot deformation. JOM. 2018;70:2385–2391. doi: 10.1007/s11837-018-3054-2
   Web of Science ®Google Scholar
• Saadatkia S, Mirzadeh H, Cabrera JM. Hot deformation behavior, dynamic recrystallization, and physically-based constitutive modeling of plain carbon steels. Mater Sci Eng A. 2015;636:196–202. doi: 10.1016/j.msea.2015.03.104
   Web of Science ®Google Scholar
• Bianchi JH, Karjalainen LP. Modelling of dynamic and metadynamic recrystallisation during bar rolling of a medium carbon spring steel. J Mater Process Technol. 2005;160:267–277. doi: 10.1016/j.jmatprotec.2004.06.016
   Web of Science ®Google Scholar
• Lin YC, Chen MS, Zhong J. Study of metadynamic recrystallization behaviors in a low alloy steel. J Mater Process Technol. 2009;209:2477–2482. doi: 10.1016/j.jmatprotec.2008.05.047
   Web of Science ®Google Scholar
• Carsí M, López V, Peñalba F, et al. The strain rate as a factor influencing the hot forming simulation of medium carbon microalloyed steels. Mater Sci Eng A. 1996;216:155–160. doi: 10.1016/0921-5093(96)10405-6
   Web of Science ®Google Scholar
• Ayada M, Yuga M, Tsuji N, et al. Effect of vanadium and niobium on restoration behavior after hot deformation in medium carbon spring steels. ISIJ Int. 1998;38:1022–1031. doi: 10.2355/isijinternational.38.1022
   Web of Science ®Google Scholar
• Medina SF, Quispe A, Valles P, et al. Recrystallization-precipitation interaction study of two medium carbon niobium microalloyed steels. ISIJ Int. 1999;39:913–922. doi: 10.2355/isijinternational.39.913
   Web of Science ®Google Scholar
• Lin YC, Chen MS, Zhong J. Study of static recrystallization kinetics in a low alloy steel. Comput Mater Sci. 2008;44:316–321. doi: 10.1016/j.commatsci.2008.03.027
   Web of Science ®Google Scholar
• Herrera C, Lima NB, Filho AF, et al. Texture and mechanical properties evolution of a deep drawing medium carbon steel during cold rolling and subsequent recrystallization. J Mater Process Technol. 2009;209:3518–3524. doi: 10.1016/j.jmatprotec.2008.08.007
   Web of Science ®Google Scholar
• Alaneme KK. Influence of tempered microstructures on the transformation behaviour of cold deformed and intercritically annealed medium carbon low alloy steel. Mater Res. 2010;13:203–209. doi: 10.1590/S1516-14392010000200014
   Web of Science ®Google Scholar
• Erişira E, Bilirb OG. Nucleation and growth of austenite from martensite during reaustenization using phase field modeling. J Mater Eng Perform. 2013;23:1055–1061. doi: 10.1007/s11665-013-0848-9
   Web of Science ®Google Scholar
• Fereiduni E, Ghasemi Banadkouki SS. Improvement of mechanical properties in a dual-phase ferrite–martensite AISI4140 steel under tough-strong ferrite formation. Mater Des. 2014;56:232–240. doi: 10.1016/j.matdes.2013.11.005
   Web of Science ®Google Scholar
• Sabet Ghorabaei A, Ghasemi Banadkouki SS. Abnormal mechanical behavior of a medium-carbon steel under strong ferrite-pearlite-martensite triple-phase microstructures. Mater Sci Eng A. 2017;700:562–573. doi: 10.1016/j.msea.2017.06.035
   Web of Science ®Google Scholar
• de la Concepción VL, Lorusso HN, Svoboda HG. Effect of carbon content on microstructure and mechanical properties of dual phase steels. Proc Mater Sci. 2015;8:1047–1056. doi: 10.1016/j.mspro.2015.04.167
   Google Scholar
• Hernández-Silva D, Morales RD, Cabañas-Moreno JG. The spheroidization of cementite in a medium carbon steel by means of subcritical and intercritical annealing. ISIJ Int. 1992;32:1297–1305. doi: 10.2355/isijinternational.32.1297
   Web of Science ®Google Scholar
• Tyagi R, Nath SK, Ray S. Development of wear resistant medium carbon dual phase steels and their mechanical properties. Mater Sci Tech. 2004;20:645–652. doi: 10.1179/026708304225012062
   Web of Science ®Google Scholar
• Zamani M, Mirzadeh H, Ghasemi HM. Mechanical properties and fracture behavior of intercritically annealed AISI 4130 chromoly steel. Mater Res Express. 2018;5:066548. doi: 10.1088/2053-1591/aacd96
   Web of Science ®Google Scholar
• Jamei F, Mirzadeh H, Zamani M. Synergistic effects of holding time at intercritical annealing temperature and initial microstructure on the mechanical properties of dual phase steel. Mater Sci Eng A. 2019;750:125–131. doi: 10.1016/j.msea.2019.02.052
   Web of Science ®Google Scholar
• Das D, Chattopadhyay PP. Influence of martensite morphology on the work-hardening behavior of high strength ferrite–martensite dual-phase steel. J Mater Sci. 2009;44:2957–2965. doi: 10.1007/s10853-009-3392-0
   Web of Science ®Google Scholar
• Schemmann L, Zaefferer S, Raabe D, et al. Alloying effects on microstructure formation of dual phase steels. Acta Mater. 2015;95:386–398. doi: 10.1016/j.actamat.2015.05.005
   Web of Science ®Google Scholar
• Shukla N, Das S, Maji S, et al. Effect of pre-intercritical annealing treatments on the microstructure and mechanical properties of 0.33% carbon dual-phase steel. J Mater Eng Perform. 2015;24:4958–4965. doi: 10.1007/s11665-015-1750-4
   Web of Science ®Google Scholar
• Ghaemifar S, Mirzadeh H. Refinement of banded structure via thermal cycling and its effects on mechanical properties of dual phase steel. Steel Res Int. 2018;89:1700531. doi: 10.1002/srin.201700531
   Web of Science ®Google Scholar
• Ghaemifar S, Mirzadeh H. Enhanced mechanical properties of dual-phase steel by repetitive intercritical annealing. Can Metall Q. 2017;56:459–463. doi: 10.1080/00084433.2017.1361223
   Web of Science ®Google Scholar
• Azizi-Alizamini H, Militzer M, Poole WJ. Formation of ultrafine grained dual phase steels through rapid heating. ISIJ Int. 2011;51:958–964. doi: 10.2355/isijinternational.51.958
   Web of Science ®Google Scholar
• Mirzadeh H, Alibeyki M, Najafi M. Unraveling the initial microstructure effects on mechanical properties and work-hardening capacity of dual-phase steel. Metall Mater Trans A. 2017;48:4565–4573. doi: 10.1007/s11661-017-4246-z
   Web of Science ®Google Scholar
• Nakada N, Arakawa Y, Park KS, et al. Dual phase structure formed by partial reversion of cold-deformed martensite. Mater Sci Eng A. 2012;553:128–133. doi: 10.1016/j.msea.2012.06.001
   Web of Science ®Google Scholar
• Deng Y, Di H, Misra RDK. On significance of initial microstructure in governing mechanical behavior and fracture of dual-phase steels. J Iron Steel Res Int. 2018;25:932–942. doi: 10.1007/s42243-018-0133-0
   Web of Science ®Google Scholar
• Nouroozi M, Mirzadeh H, Zamani M. Effect of microstructural refinement and intercritical annealing time on mechanical properties of high-formability dual phase steel. Mater Sci Eng A. 2018;736:22–26. doi: 10.1016/j.msea.2018.08.088
   Web of Science ®Google Scholar
• Nikkhah S, Mirzadeh H, Zamani M. Improved mechanical properties of mild steel via combination of deformation, intercritical annealing, and quench aging. Mater Sci Eng A. 2019;756:268–271. doi: 10.1016/j.msea.2019.04.071
   Web of Science ®Google Scholar
• Nikkhah S, Mirzadeh H, Zamani M. Fine tuning the mechanical properties of dual phase steel via thermomechanical processing of cold rolling and intercritical annealing. Mater Chem Phys. 2019;230:1–8. doi: 10.1016/j.matchemphys.2019.03.053
   Web of Science ®Google Scholar
• Dutta T, Dey S, Datta S, et al. Designing dual-phase steels with improved performance using ANN and GA in tandem. Comput Mater Sci. 2019;157:6–16. doi: 10.1016/j.commatsci.2018.10.020
   Web of Science ®Google Scholar
• Wang S, Wei K, Li J, et al. Enhanced tensile properties of 316L stainless steel processed by a novel ultrasonic resonance plastic deformation technique. Mater Lett. 2019;236:342–345. doi: 10.1016/j.matlet.2018.10.080
   Web of Science ®Google Scholar
• Naghizadeh M, Mirzadeh H. Microstructural evolutions during reversion annealing of cold-rolled AISI 316 austenitic stainless steel. Metall Mater Trans A. 2018;49:2248–2256. doi: 10.1007/s11661-018-4583-6
   Web of Science ®Google Scholar
• Li J, Fang C, Liu Y, et al. Deformation mechanisms of 304L stainless steel with heterogeneous lamella structure. Mater Sci Eng A. 2019;742:409–413. doi: 10.1016/j.msea.2018.11.047
   Web of Science ®Google Scholar
• Mao Q, Gao B, Li J, et al. Enhanced tensile properties of 316L steel via grain refinement and low-strain rolling. Mater Sci Tech. 2019;35:1497–1503. doi: 10.1080/02670836.2019.1630088
   Web of Science ®Google Scholar
• Kheiri S, Mirzadeh H, Naghizadeh M. Tailoring the microstructure and mechanical properties of AISI 316L austenitic stainless steel via cold rolling and reversion annealing. Mater Sci Eng A. 2019;759:90–96. doi: 10.1016/j.msea.2019.05.028
   Web of Science ®Google Scholar
• Gang UG, Lee JC, Nam WJ. Effect of prior microstructures on the behavior of cementite particles during subcritical annealing of medium carbon steels. Met Mater Int. 2009;15:719–725. doi: 10.1007/s12540-009-0719-3
   Web of Science ®Google Scholar
• Xu L, Chen L, Sun W. Effects of soaking and tempering temperature on microstructure and mechanical properties of 65Si2MnWE spring steel. Vacuum. 2018;154:322–332. doi: 10.1016/j.vacuum.2018.05.029
   Web of Science ®Google Scholar
• Nasiri Z, Mirzadeh H. Enhancement of work-hardening behavior of dual phase steel by heat treatment. Materialwiss Werkst. 2018;49:1081–1086. doi: 10.1002/mawe.201700122
   Web of Science ®Google Scholar
• Krajewski S, Nowacki J. Dual-phase steels microstructure and properties consideration based on artificial intelligence techniques. Arch Civ Mech Eng. 2014;14:278–286. doi: 10.1016/j.acme.2013.10.002
   Web of Science ®Google Scholar
• Naghizadeh M, Mirzadeh H. Modeling the kinetics of deformation-induced martensitic transformation in AISI 316 metastable austenitic stainless steel. Vacuum. 2018;157:243–248. doi: 10.1016/j.vacuum.2018.08.066
   Web of Science ®Google Scholar
• Rafiei M, Mirzadeh H, Malekan M, et al. Homogenization kinetics of a typical nickel-based superalloy. J Alloy Compd. 2019;793:277–282. doi: 10.1016/j.jallcom.2019.04.147
   Web of Science ®Google Scholar
• Christian JW. The theory of Transformations in metals and Alloys, Part 1, Third edition. Oxford (UK): Pergamon Press; 2002.
   Google Scholar
• Hall EO. Yield point phenomena in metals and alloys. New York (NY): Plenum Press; 1970.
   Google Scholar
• Sodjit S, Uthaisangsuk V. Microstructure based prediction of strain hardening behavior of dual phase steels. Mater Des. 2012;41:370–379. doi: 10.1016/j.matdes.2012.05.010
   Web of Science ®Google Scholar
• Tasan CC, Diehl M, Yan D, et al. An overview of dual-phase steels: advances in microstructure-oriented processing and micromechanically guided design. Annu Rev Mater Res. 2015;45:391–431. doi: 10.1146/annurev-matsci-070214-021103
   Web of Science ®Google Scholar
• Maleki M, Mirzadeh H, Zamani M. Effect of intercritical annealing on mechanical properties and work-hardening response of high formability dual phase steel. Steel Res Int. 2018;89:1700412. doi: 10.1002/srin.201700412
   Web of Science ®Google Scholar
• Kuziak R, Kawalla R, Waengler S. Advanced high strength steels for automotive industry. Arch Civ Mech Eng. 2008;8:103–117. doi: 10.1016/S1644-9665(12)60197-6
   Web of Science ®Google Scholar
• Razzaghi M, Mirzadeh H, Emamy M. Unraveling the effects of Zn addition and hot extrusion process on the microstructure and mechanical properties of as-cast Mg–2Al magnesium alloy. Vacuum. 2019;167:214–222. doi: 10.1016/j.vacuum.2019.06.013
   Web of Science ®Google Scholar
• Zamani R, Mirzadeh H, Emamy M. Mechanical properties of a hot deformed Al-Mg2Si in-situ composite. Mater Sci Eng A. 2018;726:10–17. doi: 10.1016/j.msea.2018.04.064
   Web of Science ®Google Scholar
• Pourbahari B, Mirzadeh H, Emamy M, et al. Enhanced ductility of a fine-grained Mg-Gd-Al-Zn magnesium alloy by hot extrusion. Adv Eng Mater. 2018;20:1701171. doi: 10.1002/adem.201701171
   Web of Science ®Google Scholar
• Kalhor A, Mirzadeh H. Tailoring the microstructure and mechanical properties of dual phase steel based on the initial microstructure. Steel Res Int. 2017;88:1600385. doi: 10.1002/srin.201600385
   Web of Science ®Google Scholar