References
- Carozzani T, Digonnet H, Gandin CA. 3D CAFE modeling of grain structures: application to primary dendritic and secondary eutectic solidification. Model Simul Mater Sci Eng. 2012;20(1):015010. doi:10.1088/0965-0393/20/1/015010.
- Vutova K, Koleva E, Mladenov G. The role of ingot–crucible thermal contact in mathematical modelling of the heat transfer during electron beam melting. Vacuum. 2001;62(2–3):189–196. doi:10.1016/s0042-207x(00)00437-1.
- Zhan XH, Wei YH, Dong ZB. Cellular automaton simulation of grain growth with different orientation angles during solidification process. J Mater Process Technol. 2008;208(3):1–8. doi:10.1016/j.jmatprotec.2007.12.130.
- Zhang YJ, Kou HC, Li PF, et al. Simulation on solidification structure and shrinkage porosity(hole) in TC4 ingot during vacuum arc remelting process. Special Cast Nonferrous Alloys. 2012;5(32):418–421.
- Xia YJ, Wang FM, Li CR, et al. Simulation of thermomechanical behavior during continuous casting process based on MiLE method. J Central South Univ. 2012;9(19):2403–2410. doi:10.1007/s11771-012-1288-7.
- Kou HC, Zhang YJ, Li PF, et al. Numerical simulation of titanium alloy ingot solidification structure during VAR process based on three-dimensional CAFE method. Rare Met Mater Eng. 2014;7(43):1537–1542. doi: 10.1016/S1875-5372(14)60120-X
- Wu SP, Liu DR, Guo JJ, et al. Numerical simulation of microstructure evolution of Ti-6Al-4V alloy in vertical centrifugal casting. Mater Sci Eng A. 2006;1(2):240–249.
- Zaeem MA, Yin H, Felicelli SD. Comparison of cellular automaton and phase field models to simulate dendrite growth in hexagonal crystals. J Mater Sci Technol. 2012;28(2):137–146. doi:10.1016/s1005-0302(12)60034-6.
- Zaeem M A, Yin H, Felicelli S D. Modeling dendritic solidification of Al-3%Cu using cellular automaton and phase-field methods. Appl Math Model. 2013;37(5):3495–3503. doi:10.1016/j.apm.2012.08.005.
- Gandin CA, Rappaz M, Tintillier R. Three-dimensional probabilistic simulation of solidification grain structures: application to superalloy precision castings. Metall Mater Trans A. 1993;24(2):467–479. doi:10.1007/bf02657334.
- Gandin CA, Rappaz M. A coupled finite element-cellular automaton model for the prediction of dendritic grain structures in solidification processes. Acta Metall Mater. 1994;7(42):2233–2246. doi:10.1016/0956-7151(94)90302-6.
- Wang JL, Wang FM, Zhao YY, et al. Numerical simulation of 3D-microstructures in solidification processes based on the CAFE method. Int J Min Met Mater. 2009;16(6):640–645.
- Park EM, Song GA, Lee JK, et al. Effect of solubility on strengthening of Ag-Cu ultrafine eutectic composites. J Alloys Compd. 2011;509(37):9015–9018. doi:10.1016/j.jallcom.2011.06.021.
- Zhao S, Jf L, Liu L, et al. Eutectic growth from cellular to dendritic form in the undercooled Ag-Cu eutectic alloy melt. J Cryst Growth. 2009;311(5):1387–1391. doi:10.1016/j.jcrysgro.2008.12.006.
- Cagran C, Wilthan B, Pottlacher G. Enthalpy, heat of fusion and specific electrical resistivity of pure silver, pure copper and the binary Ag-28Cu alloy. Thermochim Acta. 2006;445(2):104–110. doi:10.1016/j.tca.2005.08.014.
- McFadden S, Browne DJ. A front-tracking model to predict solidification macrostructures and columnar to equiaxed transitions in alloy castings. Appl Math Model. 2009;33(3):1397–1416. doi:10.1016/j.apm.2008.01.027.
- Zuo YB, Cui JZ, Zhao ZH, et al. Effects of refiner and cooling rate on microstructure of an Al-Mg-Mn alloy. Rare Met. 2008;32(05):589–592.
- Zhu MF, Lee SY, Hong CP. Modified cellular automaton model for the prediction of dendritic growth with melt convection. Phys Rev E. 2004;69(6):061610. doi:10.1103/PhysRevE.69.061610.
- Zhu MF, Kim JM, Hong CP. Modeling of globular and dendritic structure evolution in solidification of an Al-7wt%Si alloy. ISIJ Int. 2001;41(9):992–998. doi:10.2355/isijinternational.41.992.
- Martorano MA, Biscuola VB. Columnar front tracking algorithm for prediction of the columnar-to-equiaxed transition in two-dimensional solidification. Modell Simul Mater Sci Eng. 2006;14:1225–1243. doi: 10.1088/0965-0393/14/7/010
- Rappaz M, Gandin CA. Probabilistic modelling of microstructure formation in solidification processes. Acta Metall Mater. 1993;2(41):345–360. doi:10.1016/0956-7151(93)90065-Z.
- Gandin CA, Rappaz M. A 3D cellular automaton algorithm for the prediction of dendritic grain growth. Acta Mater. 2017;45(5):2187–2195. doi:10.1016/s1359-6454(96)00303-5.
- Kur W, Giovanolab B, Trivedi R. Theory of microstructural development during rapid solidification. Acta Metall Mater. 1986;34:823–830. doi:10.1016/0001-6160(86)90056-8.
- Lee HN, Ryoo HS. Monte Carlo simulation of microstructure evolution based on grain boundary character distribution. Mater Sci Eng A. 2000;1:176–188. doi:10.1016/s0921-5093(99)00725-x.
- Grujicic M, Cao G, Figliola SR. Computer simulation of the evolution of solidification microstructure in the LENS rapid fabrication process. Appl Surf Sci. 2001;1(2):43–57. doi:10.1016/S0169-4332(01)00553-0.
- Yan X, Fang F, Zou Q. CA-FE method for solidification simulation of super alloy castings. J Xihua Univ (Nat Sci Ed). 2008;27(06):6. doi: 1673-159X(2008)06-0067-03.
- Grujicic M, Cao G, Miller RS. Computer modeling of the evolution of dendrite microstructure in binary alloys during non-isothermal solidification. J Mater Synth Process. 2002;10(4):191–203. doi:10.1023/a:1023022214920.
- Wu SP, Liu DR, Guo JJ, et al. Modeling of solidification grain structure for Ti-45%Al alloy ingot by cellular automaton. Trans Nonferrous Met Soc China. 2005;15(2):291.
- Nastac L. Numerical modeling of solidification morphologies and segregation patters in cast dendritic alloys. Acta Mater. 1999;47(17):4253–4262. doi:10.1016/s1359-6454(99)00325-0.
- Spittle JA, Brown SGR. Computer simulation of the effect of alloy variable on the grain structures of casting. Acta Metall. 1989;37(7):1803–1810. doi:10.1016/0001-6160(89)90065-5.
- Gandin CA, Desbiolles JL, Rappaz M, et al. A three-dimensional cellular automation-finite element model for the prediction of solidification grain structures. Metall Mater Trans A. 1999;30(12):3153–3165. doi:10.1007/s11661-999-0226-2.
- Dong LN, Zhang JX. Research status of heterogeneous gradient feature for laser welded joint of Ti6Al4 V alloy. Rare Metal Mater. Eng. 2013;42(3):655–660.
- Yang YF, Xie M, Cheng Y, et al. Research status of numerical simulation of solidification microstructure. Mater Rev. 2014;28(21):24–29.
- Dexin M. Discussion of “thermal and grain-structure simulation in a Land-based Turbine Blade Directionally solidified with the liquid metal cooling process. Metall Mater Trans A. 2001;6:1212–1213.
- Nastac L. A multiscale transient modeling approach for predicting the solidification structure in VAR-processed alloy 718 ingots. Metall Mater Trans B. 2014;45(1):44–50. doi:10.1007/s11663-012-9715-6.
- Wang W. Rapid solidification behaviour of Ag-Cu-Ge ternary eutectic alloy. Mater Sci Eng A. 2001;307(1):80–90. doi:10.1016/s0921-5093(00)01954-7.
- Dutkiewicz J, Massalski TB. Search for metallic glasses at eutectic compositions in the Ag-Cu-Ge, Ag-Cu-Sb and Ag-Cu-Sb-Ge systems. Metall Trans A. 1981;12(5):773–778. doi:10.1007/BF02648341.