References
- Valiev RZ, Murashkin MY, Sabirov I. A nanostructural design to produce high-strength Al alloys with enhanced electrical conductivity. Scr Mater. 2014;76:13–16. doi:10.1016/j.scriptamat.2013.12.002.
- Chakkingal U, Suriadi AB, Thomson PF. Microstructure development during equal channel angular drawing of Al at room temperature. Scr Mater. 1998;39:677–684. doi:10.1016/S1359-6462(98)00234-6.
- Gleiter H. Nanostructured materials: basic concepts and microstructure. Acta Mater. 2000;48:1–29. http://linkinghub.elsevier.com/retrieve/pii/S1359645499002852. doi: 10.1016/S1359-6454(99)00285-2
- Lowe TC, Zhu YT. Commercialization of nanostructured metals produced by severe plastic deformation processing. Adv Eng Mater. 2003;5:373–378. doi:10.1002/adem.200310076.
- Prangnell PB, Bowen JR, Apps PJ. Ultra-fine grain structures in aluminium alloys by severe deformation processing. Mater Sci Eng A. 2004;375–377:178–185. doi:10.1016/j.msea.2003.10.170.
- Zehetbauer M, Valiev RZ. Nanomaterials by severe plastic deformationNanomaterials by severe plastic deformation – NANOSPD2. Weinheim: WILEY-VCH Verlag GmbH & Co. KGaA; 2004. p. 3–527. doi:10.1002/3527602461.
- Srinivasan R, Chaudhury PK, Cherukuri B, et al. Continuous severe plastic deformation processing of aluminum alloys. Wright State University. 2006. doi:10.2172/885079.
- Estrin Y, Murashkin M, Valiev R. Ultrafine-grained aluminium alloys: processes, structural features and propertiesFundamental of aluminium metallurgy. Production, processing and applications. Cambridge: Woodhead Publishing; 2011. p. 468–503. doi:10.1533/9780857090256.2.468.
- Lee JC, Seok HK, Suh JY. Microstructural evolutions of the Al strip prepared by cold rolling and continuous equal channel angular pressing. Acta Mater. 2002;50:4005–4019. doi:10.1016/S1359-6454(02)00200-8.
- Utsunomiya H, Hatsuda K, Sakai T, et al. Continuous grain refinement of aluminum strip by conshearing. Mater Sci Eng A. 2004;372:199–206. doi:10.1016/j.msea.2003.12.014.
- Raab GJ, Valiev RZ, Lowe TC, et al. Continuous processing of ultrafine grained Al by ECAP–conform. Mater Sci Eng A. 2004;382:30–34. doi:10.1016/j.msea.2004.04.021.
- Lee HH, Yoon JI, Kim HS. Single-roll angular-rolling: A new continuous severe plastic deformation process for metal sheets. Scr Mater. 2018;146:204–207. doi:10.1016/j.scriptamat.2017.11.043.
- Chakkingal U, Suriadi AB, Thomson PF. The development of microstructure and the influence of processing route during equal channel angular drawing of pure aluminum. Mater Sci Eng A. 1999;266:241–249. doi:10.1016/S0921-5093(98)01129-0.
- Zisman AA, Rybin VV, Van Boxel S, et al. Equal channel angular drawing of aluminium sheet. Mater Sci Eng A. 2006;427:123–129. doi:10.1016/j.msea.2006.04.007.
- Hwang SK, Jin YG, Son IH, et al. Flow characteristics of continuous shear drawing of high carbon steel. Int J Mech Sci. 2011;53:479–484. doi:10.1016/j.ijmecsci.2011.03.008.
- Ko YG, Namgung S, Shin DH, et al. Spheroidization of medium carbon steel fabricated by continuous shear drawing. J Mater Sci. 2010;45:4866–4870. doi:10.1007/s10853-010-4587-0.
- Pourbashiri M, Sedighi M, Poletti C, et al. Enhancing mechanical properties of wires by a novel continuous severe plastic deformation method. Int J Mater Res E. 2017: 1–9. doi:10.3139/146.1.
- Raab AG, Bobruk EV, Raab GI. Ultrafine-grained pure Ti processed by new SPD scheme combining drawing with shear. J Mater Eng Perform. 2018. doi:10.1007/s11665-018-3316-8.
- Aliofkhazraei M. Handbook of mechanical nanostructuring. Weinheim: Wiley-VCH; 2015.
- Sabirov I, Enikeev NA, Murashkin MY, et al. Nanostructures in materials subjected to severe plastic deformationBulk nanostructured matererials with. London: Springer; 2015. p. 11–27. doi:10.1007/978-3-319-19599-5.
- Li X, Lu K. Playing with defects in metals. Nat Mater. 2017;16:700–701. doi:10.1038/nmat4929.
- Zha M, Zhang HM, Yu ZY, et al. Bimodal microstructure – a feasible strategy for high-strength and ductile metallic materials. J Mater Sci Technol. 2018;34:257–264. doi:10.1016/j.jmst.2017.11.018.
- Zha M, Meng XT, Zhang HM, et al. High strength and ductile high solid solution Al–Mg alloy processed by a novel hard-plate rolling route. J Alloys Compd. 2017;728:872–877. doi:10.1016/j.jallcom.2017.09.017.
- Guo MX, Zhu J, Zhang Y, et al. The formation of bimodal grain size distribution in Al-Mg-Si-Cu alloy and its effect on the formability. Mater Charact. 2017;132:248–259. doi:10.1016/j.matchar.2017.08.013.
- Shakoori Oskooie M, Asgharzadeh H, Kim HS. Microstructure, plastic deformation and strengthening mechanisms of an Al-Mg-Si alloy with a bimodal grain structure. J Alloys Compd. 2015;632:540–548. doi:10.1016/j.jallcom.2015.01.229.
- Zhu L, Lu J. Modelling the plastic deformation of nanostructured metals with bimodal grain size distribution. Int J Plast. 2012;30–31:166–184. doi:10.1016/j.ijplas.2011.10.003.
- Witkin D, Lee Z, Rodriguez R, et al. Al–Mg alloy engineered with bimodal grain size for high strength and increased ductility. Scr Mater. 2003;49:297–302. doi:10.1016/s1359-6462(03)00283-5.
- Shi Y, Li B, Gao F, et al. An outstanding synergy of high strength and ductility in gradient structured low-carbon steel. Materialia. 2019;5; doi:10.1016/j.mtla.2018.100181.
- Kulagin R, Beygelzimer Y, Bachmaier A, et al. Benefits of pattern formation by severe plastic deformation, Appl. Mater Today. 2019;15:236–241. doi:10.1016/j.apmt.2019.02.007.
- Liu X, Yuan F, Zhu Y, et al. Extraordinary Bauschinger effect in gradient structured copper. Scr Mater. 2018;150:57–60. doi:10.1016/j.scriptamat.2018.03.007.
- Ma E, Zhu T. Towards strength–ductility synergy through the design of heterogeneous nanostructures in metals. Mater Today. 2017;20:323–331. doi:10.1016/j.mattod.2017.02.003.
- Li J, Weng GJ, Chen S, et al. On strain hardening mechanism in gradient nanostructures. Int J Plast. 2017;88:89–107. doi:10.1016/j.ijplas.2016.10.003.
- Zeng Z, Li X, Xu D, et al. Gradient plasticity in gradient nano-grained metals. Extrem Mech Lett. 2016;8:213–219. doi:10.1016/j.eml.2015.12.005.
- Wu XL, Jiang P, Chen L, et al. Synergetic strengthening by gradient structure. Mater Res Lett. 2014;2:185–191. doi:10.1080/21663831.2014.935821.
- Wang YM, Ma E. Three strategies to achieve uniform tensile deformation in a nanostructured metal. Acta Mater. 2004;52:1699–1709. doi:10.1016/j.actamat.2003.12.022.
- Wang L, Shi Y, Zhang Y, et al. High tensile ductility and strength in a gradient structured Zr. Mater. Lett. 2018;228:500–503. doi:10.1016/j.matlet.2018.06.084.
- Guo N, Song B, Guo C, et al. Improving tensile and compressive properties of magnesium alloy rods via a simple pre-torsion deformation. Mater Des. 2015;83:270–275. doi:10.1016/j.matdes.2015.06.071.
- Liu J, Li F, Chen H. Influences of pre-torsion deformation on microstructure and mechanical properties of pure titanium subjected to subsequent tension deformation. Chinese J Aeronaut. 2018;31:837–844. doi:10.1016/j.cja.2017.10.009.
- Wang C, Li F, Li J, et al. Microstructure evolution, hardening and thermal behavior of commercially pure copper subjected to torsion deformation. Mater Sci Eng A. 2014;598:7–14. doi:10.1016/j.msea.2013.12.079.
- Sedighi M, Vaezi A, Pourbashiri M. Influence of different torsion pitch on microstructural evolution and strengthening mechanism of al wires. Arch Metall Mater. 2018;63:625–632. doi:10.24425/122386.
- Wang C, Li F, Wei L, et al. Experimental microindentation of pure copper subjected to severe plastic deformation by combined tension–torsion. Mater Sci Eng A. 2013;571:95–102. doi:10.1016/j.msea.2013.01.057.
- Liu J, Chen H. Microstructure and texture evolution of Pure Al subjected to torsion deformation. Adv Eng Res. 2017;141:664–668.
- Le KC, Piao Y. Distribution of dislocations in twisted bars. Int J Plast. 2016;83:110–125. doi:10.1016/j.ijplas.2016.04.006.
- Le KC, Piao Y, Tran TM. Thermodynamic dislocation theory: torsion of bars. Phys Rev E. 2018;98:1–5. doi:10.1103/PhysRevE.98.063006.
- Le KC, Piao Y. Thermodynamic dislocation theory: size effect in torsion. Int J Plast. 2019;115:56–70. doi:10.1016/j.ijplas.2018.11.009.
- Koster M, Le KC. Formation of grains and dislocation structure of geometrically necessary boundaries. Mater Sci Eng A. 2015;643:12–16. doi:10.1016/j.msea.2015.07.027.
- Valiev R, Islamgaliev R, Alexandrov I. Bulk nanostructured materials from severe plastic deformation. Prog Mater Sci. 2000;45:103–189. doi:10.1016/S0079-6425(99)00007-9.
- Azushima A, Kopp R, Korhonen A, et al. Severe plastic deformation (SPD) processes for metals. CIRP Ann – Manuf Technol. 2008;57:716–735. doi:10.1016/j.cirp.2008.09.005.
- Valiev RZ, Estrin Y, Horita Z, et al. Fundamentals of Superior properties in bulk nanoSPD materials. Mater Res Lett. 2015;3831; doi:10.1080/21663831.2015.1060543.
- Sauvage X, Wilde G, Divinski SV, et al. Grain boundaries in ultrafine grained materials processed by severe plastic deformation and related phenomena. Mater Sci Eng A. 2012;540:1–12. doi:10.1016/j.msea.2012.01.080.
- Hwang SK, Baek HM, Son I-H, et al. The effect of microstructure and texture evolution on mechanical properties of low-carbon steel processed by the continuous hybrid process. Mater Sci Eng A. 2013;579:118–125. doi:10.1016/j.msea.2013.05.005.
- Hwang SK, Baek HM, Lee JW, et al. The effect of microstructure and texture evolution on mechanical properties of low carbon steel in a non-circular drawing sequence. J Mater Process Technol. 2014;214:318–325. doi:10.1016/j.jmatprotec.2013.09.020.
- Kowalczyk-gajewska K, Sztwiertnia K, Kawałko J, et al. Texture evolution in titanium on complex deformation paths: experiment and modelling. Mater Sci Eng A. 2015;637:251–263. doi:10.1016/j.msea.2015.04.040.
- Salimyanfard F, Toroghinejad MR, Ashrafizadeh F, et al. Investigation of texture and mechanical properties of copper processed by new route of equal channel angular pressing. Mater Des. 2013;44:374–381. doi:10.1016/j.matdes.2012.08.002.
- Venkatachalam P, Roy S, Ravisankar B, et al. Texture evolution in an Al–Cu alloy during equal channel angular pressing: the effect of starting microstructure. J Mater Sci. 2011. doi:10.1007/s10853-011-5598-1.
- Jahedi M, Paydar MH, Zheng S, et al. Texture evolution and enhanced grain refinement under high-pressure-double-torsion. Mater Sci Eng A. 2014;611:29–36. doi:10.1016/j.msea.2014.05.081.
- Gan WM, Huang YD, Wang R, et al. Microstructures and mechanical properties of pure Mg processed by rotary swaging. Mater Des. 2014;63:83–88. doi:10.1016/j.matdes.2014.05.057.
- Qiao XG, Gao N, Starink MJ. A model of grain refinement and strengthening of Al alloys due to cold severe plastic deformation. Philos Mag. 2012;92:446–470. doi:10.1080/14786435.2011.616865.
- Hansen N. Hall-petch relation and boundary strengthening. Scr Mater. 2004;51:801–806. doi:10.1016/j.scriptamat.2004.06.002.
- Davis JR, Davidson GM, Lampman SR, et al. ASM handbook – vol 04: heat treating. Ohio: ASM International; 1994.
- Iwahashi Y, Wang J, Horita Z, et al. Principle of equal-channel angular peessing for the processing of ultra-fine grained materials. Scr Mater. 1996;35:143–146. doi:10.1016/1359-6462(96)00107-8.
- Shrivastava SC, Jonas JJ, Canova G. Equivalent strain in large deformation torsion testing: theoretical and practical considerations. J Mech Phys Solids. 1982;30:75–90. doi:10.1016/0022-5096(82)90014-X.
- Patil Basavaraj V, Chakkingal U, Prasanna Kumar TS. Study of inner corner influence in equal channel angular pressing using 3D finite element simulation. Trans Indian Inst Met. 2008;61:125–129. doi: 10.1007/s12666-008-0004-7
- Kočiško R, Kvačkaj T, Kováčová A, et al. The influence of ECAP geometry on the effective strain distribution. J Achiev Mater Manuf Eng. 2014;62:25–30. doi:10.4028/www.scientific.net/amr.1127.135.
- Ghazani MS, Moslemi S. The effect of inner corner radius of ECAP die on strain distribution and damage accumulation in deformed sample. Trans Indian Inst Met. 2018;71:971–976. doi:10.1007/s12666-017-1230-7.
- Alkorta J, Rombouts M, De Messemaeker J, et al. On the impossibility of multi-pass equal-channel angular drawing. Scr Mater. 2002;47:13–18. doi:10.1016/S1359-6462(02)00089-1.
- Yong-jun C, Hjelen J, Roven HJ. Application of EBSD technique to ultrafine grained and nanostructured materials processed by severe plastic deformation: sample preparation, parameters optimization and analysis. Trans Nonferrous Met Soc China. 2012;22:1801–1809. doi:10.1016/S1003-6326(11)61390-3.
- Alhamidi A, Horita Z. Grain refinement and high strain rate superplasticity in alumunium 2024 alloy processed by high-pressure torsion. Mater Sci Eng A. 2015;622:139–145. doi:10.1016/j.msea.2014.11.009.
- Raj KH, Sharma RS, Singh P, et al. Study of friction stir processing (FSP) and high pressure torsion (HPT) and their effect on mechanical properties. Procedia Eng. 2011;10:2904–2910. doi:10.1016/j.proeng.2011.04.482.
- Horita Z, Langdon TG. Microstructures and microhardness of an aluminum alloy and pure copper after processing by high-pressure torsion. Mater Sci Eng A. 2005;410–411:422–425. doi:10.1016/j.msea.2005.08.133.
- Das M, Das G, Ghosh M, et al. Microstructures and mechanical properties of HPT processed 6063 Al alloy. Mater Sci Eng A. 2012;558:525–532. doi:10.1016/j.msea.2012.08.040.
- Horita Z, Langdon TG. Achieving exceptional superplasticity in a bulk aluminum alloy processed by high-pressure torsion. Scr Mater. 2008;58:1029–1032. doi:10.1016/j.scriptamat.2008.01.043.
- Li J, Li F, Hussain MZ, et al. Micro-structural evolution subjected to combined tension – torsion deformation for pure copper. Mater Sci Eng A. 2014;610:181–187. doi:10.1016/j.msea.2014.04.083.
- Kim HS. Finite element analysis of high pressure torsion processing. J Mater Process Technol. 2001;113:617–621. doi:10.1016/S0924-0136(01)00709-9.
- Kim HS. Finite element analysis of torsional deformation. Mater Sci Eng A. 2001;299:305–308. doi: 10.1016/S0921-5093(00)01416-7
- Sakai T, Belyakov A, Kaibyshev R, et al. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions. Prog Mater Sci. 2014;60:130–207. doi:10.1016/j.pmatsci.2013.09.002.
- Kawasaki M, Horita Z, Langdon TG. Microstructural evolution in high purity aluminum processed by ECAP. Mater Sci Eng A. 2009;524:143–150. doi:10.1016/j.msea.2009.06.032.
- Iwahashi Y, Horita Z, Nemoto M, et al. An investigation of microstructural evolution during equal-channel angular pressing. Acta Mater. 1997;45:4733–4741. doi:10.1016/S1359-6454(97)00100-6.
- Cabibbo M. Microstructure strengthening mechanisms in different equal channel angular pressed aluminum alloys. Mater Sci Eng A. 2013;560:413–432. doi:10.1016/j.msea.2012.09.086.
- Hou JP, Wang Q, Yang HJ, et al. Microstructure evolution and strengthening mechanisms of cold-drawn commercially pure aluminum wire. Mater Sci Eng A. 2015;639:103–106. doi:10.1016/j.msea.2015.04.102.
- Khelfa T, Rekik MA, Muñoz-Bolaños JA, et al. Microstructure and strengthening mechanisms in an Al-Mg-Si alloy processed by equal channel angular pressing (ECAP). Int J Adv Manuf Technol. 2018;95:1165–1177. doi:10.1007/s00170-017-1310-1.
- Kamikawa N, Hirochi T, Furuhara T. Strengthening mechanisms in ultrafine-grained and sub-grained high-purity aluminum. Metall Mater Trans A Phys Metall Mater Sci. 2019;50:234–248. doi:10.1007/s11661-018-5007-3.