References
- Wasilewski P. Experimental study on the effect of formulation modification on the properties of organic composite railway brake shoe. Wear. 2017;390–391:283–294.
- Singh T, Patnaik A, Chauhan R, et al. Assessment of braking performance of lapinus-wollastonite fibre reinforced friction composite materials. J King Saud Univ Eng Sci. 2017;29(2):183–190.
- Mustafa A, Abdollah MFB, Shuhimi FF, et al. Selection and verification of kenaf fibres as an alternative friction material using weighted decision matrix method. Mater Des. 2015;67:577–582.
- Prabhua TR, Varmaa VK, Vedantamb S. Effect of SiC volume fraction and size on dry sliding wear of Fe/SiC/graphite hybrid composites for high sliding speed applications. Wear. 2014;390:1–10.
- Yu X, Guo ZM, Yang J, et al. Effect of content and friction components on properties of copper-based powder metallurgy friction material. Powder Metall Technol. 2014;32(1):43–47.
- Mao K, Yao QZ, Ge CC, et al. Influence of sintering atmosphere on properties of Cu-based P/M friction materials. Powder Metall Ind. 2011;21(2):25–29.
- Ghosh SK, Saha P. Crack and wear behavior of SiC particulate reinforced aluminium based metal matrix composite fabricated by direct metal laser sintering process. Mater Des. 2011;32(1):139–145.
- Zhao Y, Liu RH, Ran X, et al. Preparation and characterization of copper matrix composite reinforced by carbon fiber. Hot Work Technol. 2015;44(10):145–148.
- Liew KW, Nirmal U. Frictional performance evaluation of newly designed brake pad materials. Mater Des. 2013;48:25–33.
- Xiao YL, Zhang ZY, Yao PP, et al. Mechanical and tribological behaviors of copper metal matrix composites for brake pads used in high-speed trains. Tribol Int. 2018;119:585–592.
- Park SJ, Cho MS. Effect of anti-oxidative filler on the interfacial mechanical properties of carbon-carbon composites measured at high temperature. Carbon. 2000;38:1053.
- Chand S. Carbon fibers for composites. J Mater Sci. 2000;35:1303.
- Xu XR, Luo XJ, Zhuang HR, et al. Electroless silver coating on fine copper powder and its effects on oxidation resistance. Mater Lett. 2003;57:3987–3991.
- Shukla S, Seal S, Rahaman Z, et al. Electroless copper coating of cenospheres using silver nitrate activator. Mater Lett. 2002;57:151–156.
- Roy YA, Gobivel K, Vijay Sekar KS, et al. Impact of cutting forces and chip microstructure in high speed machining of carbon fiber – epoxy composite tube. Arch Metall Mater. 2017;62(3):1771–1777.
- Yan SL, Zhang ZS, Song ZQ, et al. Properties of wet copper-based friction materials containing carbon fiber. Mater Sci Eng Powder Metall. 2010;15(2):186–190.
- Xia L, Jia BB, Zeng J, et al. Wear and mechanical properties of carbon fiber reinforced copper alloy composites. Mater Charact. 2009;60(5):363–369.
- Tang YP, Liu L, Zhao HJ, et al. Study of friction and wear properties of Cu/short carbon fibers composites. J Mater Eng. 2007;4:53–60.
- Yang LW, Yao GC, Wang DS. Depositing copper on carbon fiber and influence of carbon fiber to interface of Cf/Cu composite. Chin J Chem Eng. 2005;56(7):1343–1348.
- Shabani M, Paydar MH, Zamiri R, et al. Microstructural and sliding wear behavior of SiC-particle reinforced copper matrix composites fabricated by sintering and sinter-forging processes. Chin J Chem Eng. 2016;5(1):5–12.
- Jiang YL, Zhu HG. Research status of friction and wear properties of copper matrix composites. Mater Rep. 2014;28(2):33–36.
- Moustafa SF, El-Badry SA, Sanad AM, et al. Friction and wear of copper-graphite’s make with Cu-coated and uncoated graphite powders. Wear. 2002;253(7–8):699–710.
- Liu L, Tang YP, Zhao HJ, Zhu JH, et al. Fabrication and properties of short carbon fibers reinforced copper matrix composites. J Mater Sci. 2008;43(3):974–979.
- Li KQ, Xiang XZ, Bai XJ, et al. Effects of particle size and copper-coated graphite content on properties of the Cu/copper-coated graphite compose. Met Funct Mater. 2016;23(1):47–50.
- Su LL, Gao F, Han XM, et al. Tribological behavior of copper–graphite powder third body on copper-based friction materials. Tribol Lett. 2015;60:1–12.
- Huang ZX, Zheng Z, Zhao S, et al. Copper matrix composites reinforced by aligned carbon nanotubes: mechanical and tribological properties. Mater Des. 2017;133:570–578.
- Zhang X, Zhang YZ, Du SM, et al. Influence of braking conditions on tribological performance of copper-based powder metallurgical braking material. J Mater Eng Perform. 2018;27:4473–4480.
- Che JM, Ren CZ, Zhang S. Transitions in wear and friction of carbon fiber reinforced copper matrix composite sliding against AISI-1045 steel. Trans Tianjin Univ. 2007;3:211–214.