References
- Attaran M. The rise of 3-D printing: the advantages of additive manufacturing over traditional manufacturing. Bus Horiz. 2017;60(5):677–688. doi:10.1016/j.bushor.2017.05.011.
- Joshi SC, Sheikh AA. 3D printing in aerospace and its long-term sustainability. Virtual Phys Prototyp. 2015;10(4):175–185. doi:10.1080/17452759.2015.1111519.
- Ahn S-H, Yoon H-S, Jang K-H, et al. Nanoscale 3D printing process using aerodynamically focused nanoparticle (AFN) printing, micro-machining, and focused ion beam (FIB). CIRP Ann. 2015;64(1):523–526. doi:10.1016/j.cirp.2015.03.007.
- Jamróz W, Szafraniec J, Kurek M, et al. 3D printing in pharmaceutical and medical applications – recent achievements and challenges. Pharm Res. 2018;35(9):176–198. doi:10.1007/s11095-018-2454-x.
- Zhang LC, Klemm D, Eckert J, et al. Manufacture by selective laser melting and mechanical behavior of a biomedical Ti–24Nb–4Zr–8Sn alloy. Scr Mater. 2011;65:21–24. doi:10.1016/j.scriptamat.2011.03.024.
- Kempen K, Thijs L, Van Humbeeck J, et al. Mechanical properties of AlSi10Mg produced by selective laser melting. Phys Procedia. 2012;39:439–446. doi:10.1016/j.phpro.2012.10.059.
- Suryawanshi J, Prashanth K, Scudino S, et al. Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting. Acta Mater. 2016;115:285–294. doi:10.1016/j.actamat.2016.06.009.
- Wang L, Jiang X, Guo M, et al. Characterisation of structural properties for AlSi10Mg alloys fabricated by selective laser melting. Mater Sci Technol. 2017;33(18):2274–2282. doi: 10.1080/02670836.2017.1398513
- Zhang H, Zhu H, Qi T, et al. Selective laser melting of high strength Al–Cu–Mg alloys: processing, microstructure and mechanical properties. Mat Sci Eng A. 2016;656:47–54. doi:10.1016/j.msea.2015.12.101.
- Rosenthal I, Stern A, Frage N. Microstructure and mechanical properties of AlSi10Mg parts produced by the laser beam additive manufacturing (AM) technology. Metallogr Microstruct Anal. 2014;3(6):448–453. doi:10.1007/s13632-014-0168-y.
- Attar H, Bönisch M, Calin M, et al. Selective laser melting of in situ titanium–titanium boride composites: processing, microstructure and mechanical properties. Acta Mater. 2014;76:13–22. doi:10.1016/j.actamat.2014.05.022.
- Spierings AB, Dawson K, Uggowitzer PJ, et al. Influence of SLM scan-speed on microstructure, precipitation of Al 3 Sc particles and mechanical properties in Sc-and Zr-modified Al-Mg alloys. Mater Des. 2018;140:134–143. doi:10.1016/j.matdes.2017.11.053.
- Koutny D, Skulina D, Pantělejev L, et al. Processing of Al-Sc aluminum alloy using SLM technology. Procedia CIRP. 2018;74:44–48. doi:10.1016/j.procir.2018.08.027.
- Wang L, Jiang X, Zhu Y, et al. Investigation of performance and residual stress generation of AlSi10Mg processed by selective laser melting. Adv Mater Sci Eng. 2018;2018:1–12. doi:10.1155/2018/7814039.
- Kempen K, Thijs L, Van Humbeeck J, et al. Processing AlSi10Mg by selective laser melting: parameter optimisation and material characterisation. Mater Sci Technol. 2015;31(8):917–923. doi: 10.1179/1743284714Y.0000000702
- Wang X, Chou K. Microstructure simulations of Inconel 718 during selective laser melting using a phase field model. Int J Adv Manuf Tech. 2019;100(9-12):2147–2162. doi:10.1007/s00170-018-2814-z.
- Wei P, Wei Z, Chen Z, et al. The AlSi10Mg samples produced by selective laser melting: single track, densification, microstructure and mechanical behavior. Appl Surf Sci. 2017;408:38–50. doi:10.1016/j.apsusc.2017.02.215.
- Zhang L-C, Attar H. Selective laser melting of titanium alloys and titanium matrix composites for biomedical applications: a review. Adv Eng Mater. 2016;18:463–475. doi:10.1002/adem.201500419.
- Prashanth KG, Scudino S, Klauss HJ, et al. Microstructure and mechanical properties of Al―12Si produced by selective laser melting: effect of heat treatment. Mater Sci Eng. A. 2014;590(2):153–160. doi:10.1016/j.msea.2013.10.023.
- Trevisan F, Calignano F, Lorusso M, et al. On the selective laser melting (SLM) of the AlSi10Mg alloy: process, microstructure, and mechanical properties. Materials (Basel). 2017;10(1):76. doi:10.3390/ma10010076.
- Fiocchi J, Tuissi A, Bassani P, et al. Low temperature annealing dedicated to AlSi10Mg selective laser melting products. J Alloys Compd. 2017;695:3402–3409. doi:10.1016/j.jallcom.2016.12.019.
- Wang L, Sun J, Zhu X, et al. Effects of T2 heat treatment on microstructure and properties of the selective laser melted aluminum alloy samples. Materials (Basel). 2018;11(1):66. doi:10.3390/ma11010066.
- Rosenthal I, Shneck R, Stern A. Heat treatment effect on the mechanical properties and fracture mechanism in AlSi10Mg fabricated by additive manufacturing selective laser melting process. Mater Sci Eng. A. 2018. doi: 10.1016/j.msea.2018.05.074
- Yan-zhong W, Liang-wei H, Hong-pu Z, et al. Heat treatment process optimization for face gearsbased on deformation and residual stress control. J Chongqing Univ. 2015;1:9–18.
- Jiang X, Kong X, Zhang Z, et al. Modeling the effects of undeformed chip volume (UCV) on residual stresses during the milling of curved thin-walled parts. International Journal of Mechanical Sciences. 2020;167. doi:10.1016/j.ijmecsci.2019.105162.
- Xu Z-x, Su X-l, Xu Q-y, et al. Numerical simulation on vacuum solution heat treatment and gas quenching process of a low rhenium-containing Ni-based single crystal turbine blade. China Foundry. 2016;13(6):402–413. doi:10.1007/s41230-016-6044-4.
- Shashikanth C, Davidson M. Experimental and simulation studies on thixoforming of AA 2017 alloy. Mater High Temp. 2015;32(6):541–550. doi:10.1179/1878641314Y.0000000043.
- Shashikanth C, Davidson M. Simulation studies on deformation behaviour of AA2017 alloy in semi-solid state using FEA. Mater High Temp. 2014;31(3):274–281. doi:10.1179/1878641314Y.0000000024.
- Wang L, Jiang X, Zhu Y, et al. An approach to predict the residual stress and distortion during the selective laser melting of AlSi10Mg parts. Int J Adv Manuf Technol. 2018;97(9-12):3535–3546. doi:10.1007/s00170-018-2207-3.
- Yi Y-p, Fu X, Cui J-d, et al. Prediction of grain size for large-sized aluminium alloy 7050 forging during hot forming. J Cent South Univ. 2008;15(1):1–5. doi:10.1007/s11771-008-0001-3.