Regulating tensile properties through bainitic transformation temperature in a hot-rolled δ-TRIP steel

References

• Chiang J, Boyd JD, Pilkey AK. Effect of microstructure on retained austenite stability and tensile behaviour in an aluminum-alloyed TRIP steel. Mater Sci Eng A. 2015;638:132–142. doi: 10.1016/j.msea.2015.03.069
   Web of Science ®Google Scholar
• Jiang H, Wu H, Tang D, et al. Influence of isothermal bainitic processing on the mechanical properties and microstructure characterization of TRIP steel. J Univ Sci Technol Beijing Miner Metall Mater. 2008;15:574–579. doi: 10.1016/S1005-8850(08)60107-3
   Web of Science ®Google Scholar
• Ly AL, Findley KO. The effects of pre-straining conditions on fatigue behavior of a multiphase TRIP steel. Int J Fatigue. 2016;87:225–234. doi: 10.1016/j.ijfatigue.2016.02.004
   Web of Science ®Google Scholar
• Gholami Shiri S, Palizdar Y, Jenabali Jahromi A, et al. The failiur analysis of Nb-microalloyed δ-TRIP steel. Iran J Mater Sci Eng. 2018;15:32–42. doi: 10.22068/ijmse.15.3.32
   Google Scholar
• Ghadarghadr Jahromi K, Zarei-Hanzaki A, Golmahalleh O. Ultra fine ferrite formation in Si-Mn trip steels. Iran J Mater Sci Eng. 2008;5:1–7.
   Google Scholar
• Shen YF, Liu YD, Sun X, et al. Improved ductility of a transformation-induced-plasticity steel by nanoscale austenite lamellae. Mater Sci Eng A. 2013;583:1–10. doi: 10.1016/j.msea.2013.06.062
   Web of Science ®Google Scholar
• Zhao Y, Yan Q, Chen L, et al. Effect of isothermal temperature on microstructure and mechanical properties of high Al–low Si TRIP steel. Acta Metall Sin Engl Lett. 2014;27:389–394. doi: 10.1007/s40195-014-0068-9
   Web of Science ®Google Scholar
• Timokhina IB, Hodgson PD, Pereloma EV. Effect of microstructure on the stability of retained austenite in transformation-induced-plasticity steels. Metall Mater Trans A. 2004;35:2331–2341. doi: 10.1007/s11661-006-0213-9
   Web of Science ®Google Scholar
• Luo L, Li W, Wang L, et al. Tensile behaviors and deformation mechanism of a medium Mn-TRIP steel at different temperatures. Mater Sci Eng A. 2017;682:698–703. doi: 10.1016/j.msea.2016.11.017
   Web of Science ®Google Scholar
• Wang C, Ding H, Zhang J, et al. Effect of intercritical annealing time on the microstructures and tensile properties of a high strength TRIP steel. Acta Metall Sin Engl Lett. 2014;27:457–463. doi: 10.1007/s40195-014-0061-3
   Web of Science ®Google Scholar
• Wang C, Ding H, Zhang J, et al. Effect of partial replacement of Si with Al on the microstructures and mechanical properties of 1000 MPa TRIP steels. J Mater Eng Perform. 2014;23:3896–3906. doi: 10.1007/s11665-014-1190-6
   Web of Science ®Google Scholar
• Jiang H, Ding W, Tang D, et al. Mechanical property and microstructural characterization of C-Mn-Al-Si hot dip galvanizing TRIP steel. J Iron Steel Res Int. 2012;19:29–36. doi: 10.1016/S1006-706X(12)60136-8
   Web of Science ®Google Scholar
• Shiri SG, Jahromi SAJ, Palizdar Y, et al. Unexpected effect of Nb addition as a microalloying element on mechanical properties of δ-TRIP steels. J Iron Steel Res Int. 2016;23:988–996. doi: 10.1016/S1006-706X(16)30148-0
   Web of Science ®Google Scholar
• Maki J, Mahieu J, De Cooman BC, et al. Galvanisability of silicon free CMnAl TRIP steels. Mater Sci Technol. 2003;19:125–131. doi: 10.1179/026708303225009300
   Web of Science ®Google Scholar
• Bellhouse EM, McDermid JR. Analysis of the Fe–Zn interface of galvanized high Al–low Si TRIP steels. Mater Sci Eng A. 2008;491:39–46. doi: 10.1016/j.msea.2007.12.033
   Web of Science ®Google Scholar
• Lim N, Park H, Kim S, et al. Effects of aluminum on the microstructure and phase transformation of TRIP steels. Met Mater Int. 2012;18:647–654. doi: 10.1007/s12540-012-4012-0
   Web of Science ®Google Scholar
• Bellhouse EM, McDermid JR. Effect of continuous galvanizing heat treatments on the microstructure and mechanical properties of high Al-low Si transformation induced plasticity steels. Metall Mater Trans A. 2010;41:1460–1473. doi: 10.1007/s11661-010-0185-7
   Web of Science ®Google Scholar
• Xiong XC, Sun L, Wang JF, et al. Properties assessment of the first industrial coils of low-density duplex δ-TRIP steel. Mater Sci Technol. 2016;32:1403–1408. doi: 10.1080/02670836.2015.1130364
   Web of Science ®Google Scholar
• Yi HL, Chen P, Bhadeshia H. Optimizing the morphology and stability of retained austenite in a δ-TRIP steel. Metall Mater Trans A. 2014;45:3512–3518. doi: 10.1007/s11661-014-2267-4
   Web of Science ®Google Scholar
• Yi HL. Review on δ-transformation-induced plasticity (TRIP) steels with low density: the concept and current progress. JOM. 2014;66:1759–1769. doi: 10.1007/s11837-014-1089-6
   Web of Science ®Google Scholar
• Ding W, Hedström P, Li Y. Heat treatment, microstructure and mechanical properties of a C–Mn–Al–P hot dip galvanizing TRIP steel. Mater Sci Eng A. 2016;674:151–157. doi: 10.1016/j.msea.2016.07.119
   Web of Science ®Google Scholar
• De Cooman BC. Structure–properties relationship in TRIP steels containing carbide-free bainite. Curr Opin Solid State Mater Sci. 2004;8:285–303. doi: 10.1016/j.cossms.2004.10.002
   Web of Science ®Google Scholar
• Bilmes PD, Solari M, Llorente CL. Characteristics and effects of austenite resulting from tempering of 13Cr–NiMo martensitic steel weld metals. Mater Charact. 2001;46:285–296. doi: 10.1016/S1044-5803(00)00099-1
   Web of Science ®Google Scholar
• Gesnouin C, Hazarabedian A, Bruzzoni P, et al. Effect of post-weld heat treatment on the microstructure and hydrogen permeation of 13CrNiMo steels. Corros Sci. 2004;46:1633–1647. doi: 10.1016/j.corsci.2003.10.006
   Web of Science ®Google Scholar
• Bashu SA, Singh K, Rawat MS. Effect of heat treatment on mechanical properties and fracture behaviour of a 12CrMoV steel. Mater Sci Eng A. 1990;127:7–15. doi: 10.1016/0921-5093(90)90184-5
   Web of Science ®Google Scholar
• Carrouge D, Bhadeshia HKDH, Woollin P. Effect of δ-ferrite on impact properties of supermartensitic stainless steel heat affected zones. Sci Technol Weld Join. 2004;9:377–389. doi: 10.1179/136217104225021823
   Web of Science ®Google Scholar
• Sui G, Charles EA, Congleton J. The effect of delta-ferrite content on the stress corrosion cracking of austenitic stainless steels in a sulphate solution. Corros Sci. 1996;38:687–703. doi: 10.1016/0010-938X(96)00159-X
   Web of Science ®Google Scholar
• Shang Z, Shen Y, Ji B, et al. Effect of δ-ferrite evolution and high-temperature annealing on mechanical properties of 11Cr3W3Co ferritic/martensitic steel. Met Mater Int. 2016;22:171–180. doi: 10.1007/s12540-016-5485-z
   Web of Science ®Google Scholar
• van Dijk NH, Butt AM, Zhao L, et al. Thermal stability of retained austenite in TRIP steels studied by synchrotron X-ray diffraction during cooling. Acta Mater. 2005;53:5439–5447. doi: 10.1016/j.actamat.2005.08.017
   Web of Science ®Google Scholar
• Grajcar A, Krztoń H. Effect of isothermal bainitic transformation temperature on retained austenite fraction in C-Mn-Si-Al-Nb-Ti TRIP-type steel. J Achiev Mater Manuf Eng. 2009;35:9.
   Google Scholar
• Huo Y-Q, Long X-H, Zhou Z-H, et al. Bainite transformation and TRIP effect in 20Mn2SiVB steel. Mater Sci Eng A. 2006;438–440:158–161. doi: 10.1016/j.msea.2006.02.148
   Web of Science ®Google Scholar
• Kwon EP, Fujieda S, Shinoda K, et al. Characterization of transformed and deformed microstructures in transformation induced plasticity steels using electron backscattering diffraction. Mater Sci Eng A. 2011;528:5007–5017. doi: 10.1016/j.msea.2011.03.033
   Web of Science ®Google Scholar
• Cuddy LJ, Leslie WC. Some aspects of serrated yielding in substitutional solid solutions of iron. Acta Metall. 1972;20:1157–1167. doi: 10.1016/0001-6160(72)90164-2
   Google Scholar
• Dastur YN, Leslie WC. Mechanism of work hardening in Hadfield manganese steel. Metall Trans A. 1981;12:749–759. doi: 10.1007/BF02648339
   Web of Science ®Google Scholar
• Shiekhelsouk MN, Favier V, Inal K, et al. Modelling the behaviour of polycrystalline austenitic steel with twinning-induced plasticity effect. Int J Plast. 2009;25:105–133. doi: 10.1016/j.ijplas.2007.11.004
   Web of Science ®Google Scholar
• Chen L, Kim H-S, Kim S-K, et al. Localized deformation due to Portevin–LeChatelier effect in 18Mn–0.6C TWIP austenitic steel. ISIJ Int. 2007;47:1804–1812. doi: 10.2355/isijinternational.47.1804
   Web of Science ®Google Scholar
• Cottrell AH. LXXXVI. A note on the Portevin-Le Chatelier effect. Lond Edinb Dublin Philos Mag J Sci. 1953;44:829–832. doi: 10.1080/14786440808520347
   Web of Science ®Google Scholar
• Cai ZH, Ding H, Misra RDK, et al. Unique serrated flow dependence of critical stress in a hot-rolled Fe–Mn–Al–C steel. Scr Mater. 2014;71:5–8. doi: 10.1016/j.scriptamat.2013.09.009
   Web of Science ®Google Scholar