References
- Batte AD, Honeycombe RWK. Strengthening of ferrite by vanadium carbide precipitation. Mater Sci. 1973;7(1):160–168.
- Brito RM, Kestenbach HJ. On the dispersion hardening potential of interphase precipitation in micro-alloyed niobium steel. J Mater Sci. 1981;16:1257–1263. doi: 10.1007/BF01033840
- Funakawa Y, Shizaki T, Tomita K, et al. Development of high strength hot-rolled sheet steel consisting of ferrite and nanometer-sized carbides. ISIJ Int. 2004;44(11):1945–1951. doi: 10.2355/isijinternational.44.1945
- Yen HW, Chen PY, Huang CY, et al. Interphase precipitation of nanometer-sized carbides in a titanium–molybdenum-bearing low-carbon steel. Acta Mater. 2011;59:6264–6274. doi: 10.1016/j.actamat.2011.06.037
- Kestenbach HJ, Campos SS, Morales EV. Role of interphase precipitation in microalloyed hot strip steels. Mater Sci and Technol. 2006;22(6):615–626. doi: 10.1179/026708306X81487
- Xu Y, Zhang WN, Sun MX, et al. The blocking effects of interphase precipitation on dislocations’ movement in Ti-bearing micro-alloyed steels. Mater Letters. 2015;139:177–181. doi: 10.1016/j.matlet.2014.07.135
- Zurob HS, Hutchinson CR, Béché A, et al. A transition from local equilibrium to paraequilibrium kinetics for ferrite growth in Fe–C–Mn: A possible role of interfacial segregation. Acta Mater. 2008;56:2203–2211. doi: 10.1016/j.actamat.2008.01.016
- Okamoto R, Borgenstam A, Ågren J. Interphase precipitation in niobium-microalloyed steels. Acta Mater. 2010;58:4783–4790. doi: 10.1016/j.actamat.2010.05.014
- Oliver WC, Pharr GM. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res. 1992;7(6):1564–1583. doi: 10.1557/JMR.1992.1564
- Zhang YJ, Miyamoto G, Shinbo K, et al. Effects of α/γ orientation relationship on VC interphase precipitation in low-carbon steels. Scripta Mater. 2013;69(1):17–20. doi: 10.1016/j.scriptamat.2013.03.020
- Miyamoto G, Hori R, Poorganji B, et al. Crystallographic analysis of proeutectoid ferrite/austenite interface and interphase precipitation of vanadium carbide in medium-carbon steel. Metall Mater Trans A. 2013;44(8):3436–3443. doi: 10.1007/s11661-013-1702-2
- Murakami T, Hatano H, Miyamoto G, et al. Effects of ferrite growth rate on interphase boundary precipitation in V microalloyed steels. ISIJ Int. 2012;52(40):616–625. doi: 10.2355/isijinternational.52.616
- Chen MY, Yen HW, Yang JR. The transition from interphase-precipitated carbides to fibrous carbides in a vanadium-containing medium-carbon steel. Scripta Mater. 2013;68(11):829–832. doi: 10.1016/j.scriptamat.2013.01.020
- Ashby MF, Jones DRH. Engineering materials, vol. 1, Oxford: Pergamon Press; 1980.
- Yong QL. Secondary phases in steels. Beijing: Metallurgy Industry Press; 2006.
- Kramer DE, Yoder KB, Gerberich WW. Surface constrained plasticity: oxide rupture and the yield point process. Philos Mag A. 2001;81(8):2033–2058. doi: 10.1080/01418610108216651
- Soer WA, Aifantis KE, De Hosson JTM. Incipient plasticity during nanoindentation at grain boundaries in body-centered cubic metals. Acta Mater. 2005;53(17):4665–4676. doi: 10.1016/j.actamat.2005.07.001
- Gouldstone AA, Koh HJ, Zeng KY, et al. Discrete and continuous deformation during nanoindentation of thin films. Acta Mater. 2000;48(9):2277–2295. doi: 10.1016/S1359-6454(00)00009-4
- Jin J, Shevlin SA, Guo ZX. Multiscale simulation of onset plasticity during nanoindentation of Al (001) surface. Acta Mater. 2008;56(16):4358–4368. doi: 10.1016/j.actamat.2008.04.064