Grain growth in IN718 superalloy fabricated by laser additive manufacturing

References

• Chlebus E, Gruber K, Kuźnicka B, et al. Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting. Mater Sci Eng: A. 2015;639:647–655. doi: 10.1016/j.msea.2015.05.035
   Web of Science ®Google Scholar
• Li J, Zhao Z, Bai P, et al. Microstructure evolution and mechanical properties of IN718 alloy fabricated by selective laser melting following different heat treatments. J Alloys Compd. 2019;772:861–870. doi: 10.1016/j.jallcom.2018.09.200
   Web of Science ®Google Scholar
• Tucho WM, Cuvillier P, Sjolyst-Kverneland A, et al. Microstructure and hardness studies of Inconel 718 manufactured by selective laser melting before and after solution heat treatment. Mater Sci Eng A. 2017;689:220–232. doi: 10.1016/j.msea.2017.02.062
   Web of Science ®Google Scholar
• Kumar S, Sudhakar Rao G, Chattopadhyay K, et al. Effect of surface nanostructure on tensile behavior of superalloy IN718. Mater Des. 2014;62:76–82. doi: 10.1016/j.matdes.2014.04.084
   Web of Science ®Google Scholar
• Sui S, Tan H, Chen J, et al. The influence of Laves phases on the room temperature tensile properties of Inconel 718 fabricated by powder feeding laser additive manufacturing. Acta Mater. 2019;164:413–427. doi: 10.1016/j.actamat.2018.10.032
   Web of Science ®Google Scholar
• Basak A, Das S. Epitaxy and microstructure evolution in metal additive manufacturing. Annu Rev Mater Res. 2016;46:125–149. doi: 10.1146/annurev-matsci-070115-031728
   Web of Science ®Google Scholar
• Liu F, Lin X, Huang C. The effect of laser scanning path on microstructures and mechanical properties of laser solid formed nickel-base superalloy Inconel 718. J Alloys Compd. 2011;509(13):4505–4509. doi: 10.1016/j.jallcom.2010.11.176
   Web of Science ®Google Scholar
• Ma M, Wang Z, Zeng X. Effect of energy input on microstructural evolution of direct laser fabricated IN718 alloy. Mater Charact. 2015;106:420–427. doi: 10.1016/j.matchar.2015.06.027
   Web of Science ®Google Scholar
• Parimi LL, Ravi AG, Clark D, et al. Microstructural and texture development in direct laser fabricated IN718. Mater Charact. 2014;89:102–111. doi: 10.1016/j.matchar.2013.12.012
   Web of Science ®Google Scholar
• Helmer H, Bauereiß A, Singer RF. Grain structure evolution in Inconel 718 during selective electron beam melting. Mater Sci Eng A. 2016;668:180–187. doi: 10.1016/j.msea.2016.05.046
   Web of Science ®Google Scholar
• Dinda GP, Dasgupta AK, Mazumder J. Texture control during laser deposition of nickel-based superalloy. Scr Mater. 2012;67(5):503–506. doi: 10.1016/j.scriptamat.2012.06.014
   Web of Science ®Google Scholar
• Gäumann M, Bezençon C, Canalis P. Single-crystal laser deposition of superalloys: processing–microstructure maps. Acta Mater. 2001;49(6):1051–1062. doi: 10.1016/S1359-6454(00)00367-0
   Web of Science ®Google Scholar
• Cloots M, Uggowitzer PJ, Wegener K, et al. Investigations on the microstructure and crack formation of IN738LC samples processed by selective laser melting using Gaussian and doughnut profiles. Mater Des. 2016;89:291–299. doi: 10.1016/j.matdes.2015.10.027
   Web of Science ®Google Scholar
• Wang D, Song C, Yang Y, et al. Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316L stainless steel parts. Mater Des. 2016;100:291–299. doi: 10.1016/j.matdes.2016.03.111
   Web of Science ®Google Scholar
• Deng D, Penga RL, Brodinb H, et al. Microstructure and mechanical properties of Inconel 718 produced by selective laser melting: sample orientation dependence and effects of post heat treatments. Mater Sci Eng A. 2018;713:294–306. doi: 10.1016/j.msea.2017.12.043
   Web of Science ®Google Scholar
• Yu H, Li J, Lin X, et al. Anomalous overgrowth of converging dendrites during directional solidification. J Cryst Growth. 2014;402(36):210–214. doi: 10.1016/j.jcrysgro.2014.05.016
   Web of Science ®Google Scholar
• Akamatsu S, Faivre G, Ihle T. Symmetry-broken double fingers and seaweed patterns in thin-film directional solidification of a nonfaceted cubic crystal. Physl Rev E Stat Phys Plasmas Fluids Relat Interdiscipl Top. 1995;51(5):4751–4773.
   PubMed Web of Science ®Google Scholar
• Akamatsu S, Ihle T. Similarity law for the tilt angle of dendrites in directional solidification of non-axially-oriented crystals. Phys Rev.E. 1997;56(56):4479–4485. doi: 10.1103/PhysRevE.56.4479
   Web of Science ®Google Scholar
• Akamatsu S, Faivre G. Anisotropy-driven dynamics of cellular fronts in directional solidification in thin samples. Phys Rev E Stat Phys Plasmas Fluids Relat Interdiscipl Top. 1998;58(3):3302–3315.
   Web of Science ®Google Scholar
• Yu C, Pucun B, Fei L, et al. Investigation on the precipitates of IN718 alloy fabricated by selective laser melting. Metals (Basel). 2019;9:1128. https://doi.org/10.3390/met9101128.
   Web of Science ®Google Scholar
• Wan HY, Zhou ZJ, Li CP, et al. Effect of scanning strategy on grain structure and crystallographic texture of Inconel 718 processed by selective laser melting. J Mater Sci Technol. 2018;34(10):89–94. doi: 10.1016/j.jmst.2018.02.002
   Web of Science ®Google Scholar
• Chen ZW, Phan MAL, Darvish K. Grain growth during selective laser melting of a Co–Cr–Mo alloy. J Mater Sci. 2017;52(12):7415–7427. doi: 10.1007/s10853-017-0975-z
   Web of Science ®Google Scholar