Effect of Mn on precipitation behaviour of NiAl phase in Fe–NiAl steels

References

• Huang S, Gao Y, An K, et al. Deformation mechanisms in a precipitation-strengthened ferritic superalloy revealed by in situ neutron diffraction studies at elevated temperatures. Acta Mater. 2015;83:137–148. doi: 10.1016/j.actamat.2014.09.053
   Web of Science ®Google Scholar
• Brown LM. Strengthening Mechanisms in Crystal Plasticity, by Ali Argon. Contemp Phys. 2013;54(6):306–307. doi: 10.1080/00107514.2013.857723
   Google Scholar
• Wang JS, Mulholland MD, Olson GB, et al. Prediction of the yield strength of a secondary-hardening steel. Acta Mater. 2013;61(13):4939–4952. doi: 10.1016/j.actamat.2013.04.052
   Web of Science ®Google Scholar
• Leitner H, Schober M, Schnitzer R. Splitting phenomenon in the precipitation evolution in an Fe–Ni–Al–Ti–Cr stainless steel. Acta Mater. 2010;58(4):1261–1269. doi: 10.1016/j.actamat.2009.10.030
   Web of Science ®Google Scholar
• Hochanadel PW, Edwards GR, Robino CV, et al. Heat treatment of investment cast PH 13-8 Mo stainless steel: Part I. mechanical properties and microstructure. Metall Mater Trans A. 1994;25(4):789–798. doi: 10.1007/BF02665455
   Web of Science ®Google Scholar
• Teng ZK, Miller MK, Ghosh G, et al. Characterization of nanoscale NiAl-type precipitates in a ferritic steel by electron microscopy and atom probe tomography. Scr Mater. 2010;63(1):61–64. doi: 10.1016/j.scriptamat.2010.03.013
   Web of Science ®Google Scholar
• Yang JM, Jeng SM, Bain K, et al. Microstructure and mechanical behavior of in-situ directional solidified NiAl/Cr(Mo) eutectic composite. Acta Mater. 1997;45(1):295–308. doi: 10.1016/S1359-6454(96)00124-3
   Web of Science ®Google Scholar
• Noebe RD, Bowman RR, Nathal MV. Physical and mechanical properties of the B2 compound NiAl. Int Mater Rev. 1993;38(4):193–232. doi: 10.1179/imr.1993.38.4.193
   Web of Science ®Google Scholar
• Guo JT. Research progress of intermetallic NiAl alloys. J Central South Univ (Sci Technol.) 2007;06:5–19.
   Google Scholar
• Ping DH, Ohnuma M, Hirakawa Y, et al. Microstructural evolution in 13Cr–8Ni–2.5Mo–2Al martensitic precipitation-hardened stainless steel. Mater Sci Eng A J. 2005;394(1–2):285–295. doi: 10.1016/j.msea.2004.12.002
   Web of Science ®Google Scholar
• Kainuma R, Ohtani H, Ishida K. Effect of alloying elements on martensitic transformation in the binary NiAl(β) phase alloys. Metall Mater Trans A. 1996;27(9):2445–2453. doi: 10.1007/BF02652338
   Web of Science ®Google Scholar
• Liu CT, Fu CL, Chisholm MF, et al. Magnetism and solid solution effects in NiAl (40% Al) alloys. Prog Mater Sci. 2007;52(2/3):352–370. doi: 10.1016/j.pmatsci.2006.10.014
   Web of Science ®Google Scholar
• Thompson RJ, Zhao JC, Hemker KJ. Effect of ternary elements on a martensitic transformation in β-NiAl. Intermetallics. 2010;18(5):0–802. doi: 10.1016/j.intermet.2009.12.017
   Web of Science ®Google Scholar
• Teng ZK, Ghosh G, Miller MK, et al. Neutron-diffraction study and modeling of the lattice parameters of a NiAl-precipitate-strengthened Fe-based alloy. J Acta Mater. 2012;60(13-14):5362–5369. doi: 10.1016/j.actamat.2012.05.033
   Web of Science ®Google Scholar
• Vo NQ, Liebscher CH, Rawlings MJS, et al. Creep properties and microstructure of a precipitation-strengthened ferritic Fe–Al–Ni–Cr alloy. J Acta Mater. 2014;71:89–99. doi: 10.1016/j.actamat.2014.02.020
   Web of Science ®Google Scholar
• Leng W, Tian W. Precipitation characteristics by/in NiAl/Fe taken as matrix/precipitate in Ni-Al-Fe system. J. Rare Metals. 2009;33(2):185–190.
   Google Scholar
• Olof Chellman, du Rivage JB, Seidman DN. Efficient sampling for three-dimensional atom probe microscopy data. Ultramicroscopy. 2005;95(1-4):199–205.
   Web of Science ®Google Scholar
• Dmitrieva O, Ponge D, Inden G, et al. Chemical gradients across phase boundaries between martensiteand austenite in steel studied by atom probe tomography and simulation. Acta Mater. 2011;59:364–374. doi: 10.1016/j.actamat.2010.09.042
   Web of Science ®Google Scholar
• Jiao ZB, Luan JH, Zhang ZW, et al. High-strength steels hardened mainly by nanoscale NiAl precipitates. J Scripta Mater. 2014;87:45–48. doi: 10.1016/j.scriptamat.2014.05.006
   Web of Science ®Google Scholar
• Jiao ZB, Luan JH, Miller MK, et al. Effects of Mn partitioning on nanoscale precipitation and mechanical properties of ferritic steels strengthened by NiAl nanoparticles. J. Acta Mater. 2015;84:283–291. doi: 10.1016/j.actamat.2014.10.065
   Web of Science ®Google Scholar
• Miller MK. Atom probe tomography: analysis at the atomic level. New York: Kluwer Academic/Plenum; 2000.
   Google Scholar
• Alinger MJ, Odette GR, Hoelzer DT. On the role of alloy composition and processing parameters in nanocluster formation and dispersion strengthening in nanostuctured ferritic alloys. Acta Mater. 2009;57(2):392–406. doi: 10.1016/j.actamat.2008.09.025
   Web of Science ®Google Scholar
• Jiao ZB, Luan JH, Miller MK, et al. Precipitate transformation from NiAl-type to Ni2AlMn-type and its influence on the mechanical properties of high-strength steels. Acta Mater. 2016;110:31–43. doi: 10.1016/j.actamat.2016.03.024
   Web of Science ®Google Scholar
• Aaronson HI, Legoues FK. Assessment of studies on homogeneous diffusional nucleation kinetics in binary metallic alloys. Metall. Mater. Trans A. 1992;23(7):1915–1945. doi: 10.1007/BF02647541
   Web of Science ®Google Scholar