Effect of α-lath size on the mechanical properties of Ti–6Al–4V using core time hydrogen heat treatment

References

• Tal-Gutelmacher E, Eliezer D. Hydrogen cracking in titanium-based alloys. J Alloy Compd. 2005;404–406:621–625. doi: 10.1016/j.jallcom.2005.02.098
   Web of Science ®Google Scholar
• Eliezer D, Tal-Gutelmacher E, Cross CE, et al. Hydrogen absorption and desorption in a duplex-annealed Ti-6Al-4V alloy during exposure to different hydrogen-containing environments. Mater Sci Eng A. 2006;433(1–2):298–304. doi: 10.1016/j.msea.2006.06.088
   Web of Science ®Google Scholar
• Senkov ON, Froes FH. Thermohydrogen processing of titanium alloys. Int J Hydrog Energy. 1999;24:565–576. doi: 10.1016/S0360-3199(98)00112-8
   Web of Science ®Google Scholar
• Zhang Y, Zhang SQ. Hydrogenation characteristics of Ti-6Al-4V cast alloy and its microstructural modification by hydrogen treatment. Int J Hydrog Energy. 1997;22:161–168. doi: 10.1016/S0360-3199(96)00167-X
   Web of Science ®Google Scholar
• Senkov ON, Jonas JJ, Froes FH. Recent advances in the thermohydrogen processing of titanium alloys. JOM. 1996;48:42–47. doi: 10.1007/BF03222997
   Web of Science ®Google Scholar
• Chen CQ, Li SX, Zheng H, et al. An investigation on structure, deformation and fracture of hydrides in titanium with a large range of hydrogen contents. Acta Mater. 2004;52:3697–3706. doi: 10.1016/j.actamat.2004.04.024
   Web of Science ®Google Scholar
• Zhu T, Li M. Lattice variations of Ti-6Al-4V alloy with hydrogen content. Mater Charact. 2011;62:724–729. doi: 10.1016/j.matchar.2011.04.019
   Web of Science ®Google Scholar
• Senkov ON, Chakoumakos BC, Jonas JJ, et al. Effect of temperature and hydrogen concentration on the lattice parameter of beta titanium. Mater Res Bull. 2001;36:1431–1440. doi: 10.1016/S0025-5408(01)00604-3
   Web of Science ®Google Scholar
• Qazi JI, Senkov ON, Rahim J, et al. Phase Transformations in Ti-6Al-4V-xH alloys. Metall Mater Trans A Phys Metall Mater Sci. 2001;32A:2453–2463. doi: 10.1007/s11661-001-0035-8
   Web of Science ®Google Scholar
• Azevedo CRF, Rodriues D, Beneduce Neto F. Ti-Al-V powder metallurgy (PM) via the hydrogenation-dehydrogenation (HDH) process. J Alloy Compd. 2003;353:217–227. doi: 10.1016/S0925-8388(02)01297-5
   Web of Science ®Google Scholar
• McQuillan AD. An experimental and thermodynamic investigation of the hydrogen-titanium system. Proc R Soc Lond A Math Phys Sci. 1950;204:309–323.
   Google Scholar
• Lenning GA, Craighead CM, Jaffee RI. Constitution and mechanical properties of titanium-hydrogen alloys. JOM. 1954;6:367–376. doi: 10.1007/BF03398020
   Google Scholar
• Liu CT, Wu TI, Wu JK. Formation of nanocrystalline structure of Ti-6Al-4V alloy by cyclic hydrogenation-dehydrogenation treatment. Mater Chem Phys. 2008;110:440–444. doi: 10.1016/j.matchemphys.2008.02.034
   Web of Science ®Google Scholar
• Fang TY, Wang WH. Microstructure features of thermochemical processing in a Ti-6Al-4V alloy. Mater Chem Phys. 1998;56:35–47. doi: 10.1016/S0254-0584(98)00137-0
   Web of Science ®Google Scholar
• Zong Y, Wu K. Thermo hydrogen treatment for microstructure refinement and mechanical properties improvement of Ti-6Al-4V alloy. Mater Sci Eng A Struct Mater. 2017;703:430–437. doi: 10.1016/j.msea.2017.07.076
   Web of Science ®Google Scholar
• Chang Y, Breen AJ, Tarzimoghadam Z, et al. Characterizing solute hydrogen and hydrides in pure and alloyed titanium at the atomic scale. Acta Mater. 2018;150:273–280. doi: 10.1016/j.actamat.2018.02.064
   Web of Science ®Google Scholar
• Fang ZZ, Sun P, Wang H. Hydrogen sintering of titanium to produce high density fine grain titanium alloys. Adv Eng Mater. 2012;14:383–387. doi: 10.1002/adem.201100269
   Web of Science ®Google Scholar
• Cao F, Ravi Chandran KS, Kumar P. New approach to achieve high strength powder metallurgy Ti-6Al-4V alloy through accelerated sintering at β-transus temperature and hydrogenation-dehydrogenation treatment. Scr Mater. 2017;130:22–26. doi: 10.1016/j.scriptamat.2016.11.005
   Web of Science ®Google Scholar
• Lee DW, Lee HS, Park JH, et al. Sintering of titanium hydride powder compaction. Procedia Manuf. 2015;2:550–557. doi: 10.1016/j.promfg.2015.07.095
   Google Scholar
• Eliaz N, Eliezer D, Olson DL. Hydrogen-assisted processing of materials. Mater Sci Eng A Struct Mater. 2000;289:43–53. doi: 10.1016/S0921-5093(00)00906-0
   Web of Science ®Google Scholar
• Zong YY, Shan DB, Lu Y, et al. Effect of 0.3 wt% H addition on the high temperature deformation behaviors of Ti–6Al–4 V alloy. Int J Hydrog Energy. 2007;32:3936–3940. doi: 10.1016/j.ijhydene.2007.04.032
   Web of Science ®Google Scholar
• Oh JM, Koo JG, Lim JW. Enhanced densification and hardness of titanium bodies sintered by advanced hydrogen sintering process. Met Mater Int. 2018;24:1303–1308. doi: 10.1007/s12540-018-0134-3
   Web of Science ®Google Scholar
• Ku JG, Oh JM, Kwon HJ, et al. High-temperature hydrogen-reduction precess for the preparation of low-oxygen Mo powder form MoO3. Int J Hydrog Energy. 2017;42:2139–2143. doi: 10.1016/j.ijhydene.2016.09.004
   Web of Science ®Google Scholar
• Gui YW, Oh JM, Lim JW. Sintering properties of Ti-27Nb alloys prepared by using Ti/TiH2 powders under argon and hydrogen sintering processes. Powder Technol. 2018;339:775–780. doi: 10.1016/j.powtec.2018.08.022
   Web of Science ®Google Scholar
• Oh JM, Koo JG, Lim JW. Enhanced densification and hardness of titanium bodies sintered by advanced hydrogen sintering process met. Mater. -int. 2018;24:1303–1308. doi: 10.1007/s12540-018-0134-3
   Web of Science ®Google Scholar
• Cho GH, Oh JM, Lim JW. Lattice deformation and improvement oxidation resistance of Ti-6Al-4V alloy powders prepared by hydrogen added argon heat treatment. J Korean Powder Metall Inst. 2019;26:1–6. doi: 10.4150/KPMI.2019.26.1.1
   Google Scholar
• Sun P, Fang ZZ, Koopman M, et al. An experimental study of the (Ti-6Al-4V)-xH phase diagram using in situ synchrotron XRD and TGA/DSC techniques. Acta Mater. 2015;84:29–41. doi: 10.1016/j.actamat.2014.10.045
   Web of Science ®Google Scholar
• Bratanich TI, Skorokhod VV, Kopylova LI, et al. Ti3Al destructive hydrogenation. Int J Hydrog Energy. 2011;36:1276–1286. doi: 10.1016/j.ijhydene.2010.06.127
   Web of Science ®Google Scholar
• Yuan BG, Yu HP, Li CF, et al. Effect of hydrogen on fracture behavior of Ti-6Al-4V alloy by in-situ tensile test. Int J Hydrog Energy. 2010;35:1829–1838. doi: 10.1016/j.ijhydene.2009.12.053
   Web of Science ®Google Scholar
• Cha L, Scheu C, Clemens H, et al. Nanometer-scaled lamellar microstructures in Ti-45Al-7.5Nb-(0; 0.5)C alloys and their influence on hardness. Intermetallics. 2008;16:868–875. doi: 10.1016/j.intermet.2008.03.009
   Web of Science ®Google Scholar
• Zhang C, Kang Q, Lai Z, et al. The microstructural modification, lattice defects and mechanical properties of hydrogenated/dehydrogenated α-Ti. Acta Mater. 1996;44:1077–1084. doi: 10.1016/1359-6454(95)00211-1
   Web of Science ®Google Scholar
• Singh G, Bajargan G, Datta R, et al. Effect of hydrogen charging on tensile properties of B-modified Ti-6Al-4V alloy. Mater Sci Eng A Struct Mater. 2013;576:326–336. doi: 10.1016/j.msea.2013.04.011
   Web of Science ®Google Scholar
• Malinov S, Markovsky P, Sha W, et al. Resistivity study and computer modelling of the isothermal transformation kinetics of Ti-6Al-4V and Ti-6Al-2Sn-4Zr-2Mo-0.08Si alloys. J Alloys Compd. 2001;314:181–192. doi: 10.1016/S0925-8388(00)01227-5
   Web of Science ®Google Scholar
• Shen CC, Wang CM. Effects of hydrogen loading and type of titanium hydride on grain refinement and mechanical properties of Ti-6Al-4V. J Alloys Compd. 2014;601:274–279. doi: 10.1016/j.jallcom.2014.02.171
   Web of Science ®Google Scholar
• Yoshimura H, Kimura K, Hayashi M, et al. Ultra-fine equiaxed grain refinement and improvement of mechanical properties of α+β type titanium alloys by hydrogenation, hot working, heat treatment and dehydrogenation. Mater Trans JIM. 1994;35:266–272. doi: 10.2320/matertrans1989.35.266
   Web of Science ®Google Scholar
• Montanari R, Costanza G, Tata ME, et al. Lattice expansion of Ti-6Al-4V by nitrogen and oxygen absorption. Mater Charact. 2008;59:334–337. doi: 10.1016/j.matchar.2006.12.014
   Web of Science ®Google Scholar
• Oh JM, Lee BG, Cho SW, et al. Oxygen effects on the mechanical properties and lattice Strain of Ti and Ti-6Al-4V Met. Mater. -int. 2011;17:733–736. doi: 10.1007/s12540-011-1006-2
   Web of Science ®Google Scholar