188
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Morphological evolution of NbC particles at the interface of niobium–iron diffusion couple

, , , &
Pages 1749-1755 | Received 16 Jun 2020, Accepted 04 Sep 2020, Published online: 24 Sep 2020

References

  • Yang L, Zhang H, Wang Y, et al. A novel and simple method for large-scale synthesis of nanosized NbC powder by disproportionation reaction in molten salt. Ceram Int. 2019;45:3791–3796. doi: 10.1016/j.ceramint.2018.11.047
  • Ma J, Wu M, Du Y, et al. Formation of nanocrystalline niobium carbide (NbC) with a convenient route at low temperature. J Alloys Compd. 2009;475:415–417. doi: 10.1016/j.jallcom.2008.07.039
  • Zhao Y, Cui C, Han X, et al. Preparation of in situ NbC-TiC@graphene/Fe composite inoculant and its effect on microstructures and properties of GCr15. Mater Sci Eng A. 2020;772:138737. doi: 10.1016/j.msea.2019.138737
  • Cai X, Zhong L, Xu Y, et al. Kinetics of niobium carbide reinforced composite coating produced in situ. Vacuum. 2015;119:239–244. doi: 10.1016/j.vacuum.2015.05.035
  • Demirskyi D, Borodianska H, Suzuki TS, et al. High-temperature flexural strength performance of ternary high-entropy carbide consolidated via spark plasma sintering of TaC, ZrC and NbC. Scripta Mater. 2019;164:12–16. doi: 10.1016/j.scriptamat.2019.01.024
  • Demirskyi D, Sakka Y, Vasylkiv O. High-temperature reactive spark plasma consolidation of TiB2-NbC ceramic composites. Ceram Int. 2015;41:10828–10834. doi: 10.1016/j.ceramint.2015.05.022
  • Zhang M, Li M, Chi J, et al. Microstructure and tribology properties of in-situ MC(M:Ti,Nb) coatings prepared via PTA technology. Vacuum. 2019;160:264–271. doi: 10.1016/j.vacuum.2018.11.035
  • Soltani R, Sohi M, Ansari M, et al. Evaluation of niobium carbide coatings produced on AISI L2 steel via thermo-reactive diffusion technique. Vacuum. 2017;146:44–51. doi: 10.1016/j.vacuum.2017.09.023
  • Xie J, Zeng W, Zhou D, et al. Microstructure and properties of a nanocrystalline Cu-Al-NbC composite with high strength and good conductivity. Mater Lett. 2018;214:174–177. doi: 10.1016/j.matlet.2017.12.009
  • Varela LB, Cavaleiro A, Tschiptschin AP, et al. Tribological and milling performance of NbC-Ni films deposited by sputtering with different Ni contents. Tribol Int. 2020;147:106281. doi: 10.1016/j.triboint.2020.106281
  • Kan WH, Proust G, Bhatia V, et al. Slurry erosion, sliding wear and corrosion behavior of martensitic stainless steel composites reinforced in-situ with NbC particles. Wear. 2019;420-421:149–162. doi: 10.1016/j.wear.2018.09.013
  • Zeng W, Xie J, Zhou D, et al. In-situ formation of NbC in nanocrystalline Cu. J Alloys Compd. 2017;725:334–341. doi: 10.1016/j.jallcom.2017.07.179
  • Chang S, Yeh P, Huang K. Microstructures, mechanical properties and corrosion behaviors of NbC added to Vanadis 4 tool steel via vacuum sintering and heat treatments. Vacuum. 2017;142:123–130. doi: 10.1016/j.vacuum.2017.05.015
  • Qin S, Liao B, Mao L, et al. A novel method for preparing nano-NbC/Fe powder and nano-NbC particle reinforced cast low-carbon steel. Mater Lett. 2014;121:162–165. doi: 10.1016/j.matlet.2014.01.168
  • Yuan Y, Li Z. Growth mechanism of in-situ WC grain in Fe-Ni-W-C alloys system. J Alloys Compd. 2018;738:379–393. doi: 10.1016/j.jallcom.2017.11.382
  • Cai X, Xu Y. Microstructure, friction and wear of NbC coatings on a Fe substrate fabricated via an in situ reaction. Surf Coat Technol. 2017;322:202–210. doi: 10.1016/j.surfcoat.2017.05.046
  • Grove DE, Gupta U, Castleman Jr AW. Effect of hydrocarbons on the morphology of synthesized niobium carbide nanoparticles. Langmuir. 2010;26:16517–16521. doi: 10.1021/la101738c
  • Zhao C, Zhou Y, Xing X, et al. Investigation on the relationship between NbC and wear-resistance of Fe matrix composite coatings with different C contents. Appl Surf Sci. 2018;439:468–474. doi: 10.1016/j.apsusc.2018.01.034
  • Grove DE, Gupta U, Castleman AW. Effect of carbon concentration on changing the morphology of titanium carbide nanoparticles from cubic to cuboctahedron. ACS Nano. 2010;4:49–54. doi: 10.1021/nn9010413
  • Zhong L, Xu Y, Liu X, et al. Study on NbC particulate-reinforced iron matrix composite produced in situ. J Mater Sci. 2011;46:2814–2819. doi: 10.1007/s10853-010-5157-1
  • Nie J, Wu Y, Li P, et al. Morphological evolution of TiC from octahedron to cube induced by elemental nickel. CrystEngComm. 2012;14:2213. doi: 10.1039/c1ce06205k
  • Prywer J. Explanation of some peculiarities of crystal morphology deduced from the BFDH law. J Cryst Growth. 2004;270:699–710. doi: 10.1016/j.jcrysgro.2004.06.046
  • Wang F, Luo L, Meng X, et al. Morphological evolution of primary β-Nb5Si3 phase in Nb-Mo-Si alloys. J Alloys Compd. 2018;741:51–58. doi: 10.1016/j.jallcom.2018.01.112
  • Barzilai S, Raveh A, Frage N. Inter-diffusion of carbon into niobium coatings deposited on graphite. Thin Solid Films. 2006;496:450–456. doi: 10.1016/j.tsf.2005.09.106
  • Ohtani H, Hasebe M, Nishizawa T. Calculation of the Fe-C-Nb ternary phase diagram. Calphad. 1989;13:183–204. doi: 10.1016/0364-5916(89)90019-9
  • Qin S, Liao B, Xiao F, et al. Fabrication of NbC reinforced low carbon steel by immersing Nb(C)-Fe powders in steel melt. Adv Manuf Process. 2015;30:116–121. doi: 10.1080/10426914.2014.952034
  • Haddad F, Amara SE, Kesri R, et al. Contribution to the study of the Fe-Nb-C ternary system. J Phys IV France. 2004;122:35–39. doi: 10.1051/jp4:2004122004
  • Xia Y, Xiong Y, Lim B, et al. Shape-controlled synthesis of metal nanocrystals: simple chemistry meets complex physics? Angew Chem Int Ed 2009;48:60–103. doi: 10.1002/anie.200802248

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.