Homogenisation effect on mechanical and pitting behaviour of 2205 Duplex Stainless Steel

References

• Yunquera A, Jorge-Badiola D, Gutiérrez 1, et al. Grain boundary engineering in a thermo-mechanically processed Nb-stabilized austenitic stainless steel. IOP Conf Ser Mater Sci Eng. 2015;82:4095–4115.
   Google Scholar
• Malta PO, Condé BL, Assumpção RF, et al. Effect of annealing temperature on mechanical behavior, pitting resistance and grain boundary character of a 2304 Lean Duplex Stainless Steel. Metall Mater Trans A. 2019;50:1–13.
   Web of Science ®Google Scholar
• Breda M, Brunelli K, Grazzi F, et al. Effects of cold rolling and strain-induced martensite formation in a SAF 2205 Duplex Stainless Steel. Metall Mater Trans A Phys Metall Mater Sci. 2015;46:577–586.
   Web of Science ®Google Scholar
• Jinlong L, Tongxiang L, Chen W, et al. Effect of ultrafine grain on tensile behaviour and corrosion resistance of the duplex stainless steel. Mater Sci Eng C. 2016;62:558–563.
   PubMed Web of Science ®Google Scholar
• Aust KT. Grain boundary engineering. Can Metall. Q. 1994;33:265–274.
   Web of Science ®Google Scholar
• Williams GO, Randle V, Cowan JR, et al. The role of misorientation and phosphorus content on grain growth and intergranular fracture in iron-carbon-phosphorus alloys. J Microsc. 2004;213:321–327.
   PubMed Web of Science ®Google Scholar
• Malta PO, Dias FL, de Souza ACM, et al. Microstructure and texture evolution of duplex stainless steels with different molybdenum contents. Mater Charact. 2018;142:406–421.
   Web of Science ®Google Scholar
• Rodrigues DG, Maria GGB, Viana NAL, et al. Effect of low cold-rolling strain on microstructure, texture, phase transformation, and mechanical properties of 2304 lean duplex stainless steel. Mater Charact. 2019;150:138–149.
   Web of Science ®Google Scholar
• Fuertes N, Pettersson R. Effect of cold rolling on microstructure, corrosion and electrochemical response of the lean duplex stainless steel LDX 2101® by a correlative EBSD–SKPFM investigation. Mater Corr. 2020;71:1052–1065.
   Web of Science ®Google Scholar
• Örnek C, Engelberg DL. Correlative EBSD and SKPFM characterisation of microstructure development to assist determination of corrosion propensity in grade 2205 duplex stainless steel. J Mater Sci. 2016;51:1931–1948.
   Web of Science ®Google Scholar
• Celada-Casero C, Kooiker H, Groen M, et al. In-situ investigation of strain-induced martensitic transformation kinetics in an austenitic stainless steel by inductive measurements. Metals (Basel. 2017;7:1–15.
   Web of Science ®Google Scholar
• Hamada AS, Kisko AP, Sahu P, et al. Enhancement of mechanical properties of a TRIP-aided austenitic stainless steel by controlled reversion annealing. Mater Sci Eng A. 2015;628:154–159.
   Web of Science ®Google Scholar
• Raabe D. Texture and microstructure evolution during cold rolling of a strip cast and of a hot rolled austenitic stainless steel. Acta Mater. 1997;45:1137–1151.
   Web of Science ®Google Scholar
• Ahmed MZ, Bhattacharjee PP. Evolution of microstructure and texture during isothermal annealing of a heavily warm-rolled duplex steel. ISIJ Int. 2014;54:2844–2853.
   Web of Science ®Google Scholar
• Keichel J, Foct J, Gottstein G. Deformation and annealing behavior of nitrogen alloyed duplex stainless steels. Part II: annealing. ISIJ Int. 2003;43:1788–1794.
   Web of Science ®Google Scholar
• Tavares TB, Rodrigues DG, Santos DB. Effect of warm rolling and annealing on microstructure, texture, and mechanical properties of a 2205 duplex stainless steel. Steel Res Int. 2020;91:1900543.
   Web of Science ®Google Scholar
• Keichel J, Foct J, Gottstein G. Deformation and annealing behavior of nitrogen alloyed duplex stainless steels. Part I: rolling. ISIJ Int. 2003;43:1781–1787.
   Web of Science ®Google Scholar
• Lindell D. Texture evolution of warm-rolled and annealed 304L and 316L austenitic stainless steels. IOP Conf Ser Mater Sci Eng. 2015;82:1–4.
   Google Scholar
• Pradhan SK, Bhuyan P, Mandal S. Influence of the individual microstructural features on pitting corrosion in type 304 austenitic stainless steel. Corros Sci. 2019;158:108091.
   Web of Science ®Google Scholar
• Qi J, Huang B, Wang Z, et al. Dependence of corrosion resistance on grain boundary characteristics in a high nitrogen CrMn austenitic stainless steel. J Mater Sci Technol. 2017;33:1621–1628.
   Web of Science ®Google Scholar
• Yang J J, Fan L X, Jia J, et al. Microtexture evolution and grain boundary character distribution of interstitial-free steels with moderate levels of cold rolling reductions. J Iron Steel Res Int. 2013;20:47–52.
   Web of Science ®Google Scholar
• Hamada J, Ono N. Effect of microstructure before cold rolling on texture and formability of duplex stainless steel sheet. Mater Trans. 2010;51:635–643.
   Web of Science ®Google Scholar
• Chen S, Yu Q. The role of low angle grain boundary in deformation of titanium and its size effect. Scr Mater. 2019;163:1748–1151.
   Web of Science ®Google Scholar
• Zikry MA, Kao M. Inelastic failure mechanisms in crystalline materials with. J Mech Phys Solids. 1996;44:1765–1798.
   Web of Science ®Google Scholar
• Luo H, Li XG, Dong CF, et al. Effect of solution treatment on pitting behavior of 2205 duplex stainless steel. Arab. J Chem. 2017;10:S90–S94.
   Web of Science ®Google Scholar
• Tan H, Yiming J, Deng B, et al. Effect of annealing temperature on the pitting corrosion resistance of super duplex stainless steel UNS S32750. Mater Charact. 2009;60:1049–1054.
   Web of Science ®Google Scholar
• Ha HY, Lee TH, Lee CG, et al. Understanding the relation between pitting corrosion resistance and phase fraction of S32101 duplex stainless steel. Corr Sci. 2019;149:226–235.
   Web of Science ®Google Scholar
• Liang JM, Wu HB, Tang D, et al. Influence of inclusion and grain boundary on corrosion behaviour of low alloy steel in cargo oil tank bottom plate environment. Corr Eng Sci Technol. 2014;49:633–642.
   Web of Science ®Google Scholar
• Li SX, He YN, Yu SR, et al. Evaluation of the effect of grain size on chromium carbide precipitation and intergranular corrosion of 316L stainless steel. Corr Sci. 2013;66:211–216.
   Web of Science ®Google Scholar