The influence of post-annealing and ultrasonic vibration on the formability of multilayered Al5052/MgAZ31B composite

References

• Wu K, Chang H, Maawad E, et al. Microstructure and mechanical properties of the Mg/Al laminated composite fabricated by accumulative roll bonding (ARB). Mater Sci Eng: A. 2010;527(13–14):3073–3078.
   Web of Science ®Google Scholar
• Pahlavani M, Marzbanrad J, Rahmatabadi D, et al. A comprehensive study on the effect of heat treatment on the fracture behaviors and structural properties of Mg-Li alloys using RSM. Mater Res Express. 2019;6(7):076554.
   Web of Science ®Google Scholar
• Azodi HD, Safari M, Darabi R. Formability prediction of two-layer sheets based on ductile fracture criteria. Trans Indian Inst Met. 2017;70(7):1841–1847.
   Web of Science ®Google Scholar
• Li L, Nagai K, Yin F. Progress in cold roll bonding of metals. Sci Technol Adv Mater. 2008;9(2):023001.
   PubMed Web of Science ®Google Scholar
• Madaah-Hosseini H, Kokabi A. Cold roll bonding of 5754-aluminum strips. Mater Sci Eng: A. 2002;335(1–2):186–190.
   Web of Science ®Google Scholar
• Bay N. Cold welding. Part 2: process variants and applications. 1986.
   Google Scholar
• Yahiro A, Masui T, Yoshida T, et al. Development of nonferrous clad plate and sheet by warm rolling with different temperature of materials. ISIJ Int. 1991;31(6):647–654.
   Web of Science ®Google Scholar
• Manesh HD, Taheri AK. Study of mechanisms of cold roll welding of aluminium alloy to steel strip. Mater Sci Technol. 2004;20(8):1064–1068.
   Web of Science ®Google Scholar
• Eizadjou M, Danesh MH, Janghorban K. Investigation of roll bonding between aluminum alloy strips. Mater Des. 2008;29(4):909–913.
   Web of Science ®Google Scholar
• Le H, Sutcliffe M, Wang P, et al. Surface oxide fracture in cold aluminium rolling. Acta Mater. 2004;52(4):911–920.
   Web of Science ®Google Scholar
• Jamaati R, Toroghinejad MR. Effect of friction, annealing conditions and hardness on the bond strength of Al/Al strips produced by cold roll bonding process. Mater Des. 2010;31(9):4508–4513.
   Web of Science ®Google Scholar
• Wu H-Y, Lee S, Wang J-Y. Solid-state bonding of iron-based alloys, steel–brass, and aluminum alloys. J Mater Process Technol. 1998;75(1–3):173–179.
   Web of Science ®Google Scholar
• Barlow C, Nielsen P, Hansen N. Multilayer roll bonded aluminium foil: processing, microstructure and flow stress. Acta Mater. 2004;52(13):3967–3972.
   Web of Science ®Google Scholar
• Lukaschkin ND, Borissow AP, Erlikh AI. The system analysis of metal forming technique in welding processes. J Mater Process Technol. 1997;66(1–3):264–269.
   Web of Science ®Google Scholar
• Abbasi M, Toroghinejad MR. Effects of processing parameters on the bond strength of Cu/Cu roll-bonded strips. J Mater Process Technol. 2010;210(3):560–563.
   Web of Science ®Google Scholar
• Danesh MH, Karimi TA. The effect of annealing treatment on mechanical properties of aluminum clad steel sheet. Mater Des. 2003;24(8):617–622.
   Web of Science ®Google Scholar
• Jamaati R, Toroghinejad MR. Investigation of the parameters of the cold roll bonding (CRB) process. Mater Sci Eng: A. 2010;527(9):2320–2326.
   Web of Science ®Google Scholar
• Tsuji N, Saito Y, Utsunomiya H, et al. Ultra-fine grained bulk steel produced by accumulative roll-bonding (ARB) process. Scr Mater. 1999;40(7):795–800.
   Web of Science ®Google Scholar
• Shaarbaf M, Toroghinejad MR. Nano-grained copper strip produced by accumulative roll bonding process. Mater Sci Eng: A. 2008;473(1-2):28–33.
   Web of Science ®Google Scholar
• Yang D, Cizek P, Hodgson P. Ultrafine equiaxed-grain Ti/Al composite produced by accumulative roll bonding. Scr Mater. 2010;62(5):321–324.
   Web of Science ®Google Scholar
• Rahmatabadi D, Hashemi R. Experimental evaluation of forming limit diagram and mechanical properties of nano/ultra-fine grained aluminum strips fabricated by accumulative roll bonding. Int J Mater Res. 2017;108(12):1036–1044.
   Web of Science ®Google Scholar
• Goodwin GM. Application of strain analysis to sheet metal forming problems in the press shop. Sae Transact. 1968: 380–387. 10.4271/680093.
   Google Scholar
• Blaha F, Langenecker B. Tensile deformation of zinc crystal under ultrasonic vibration. Naturwissensch-aften. 1955;42(556):1–10.
   Google Scholar
• Bagherzadeh S, Abrinia K. Effect of ultrasonic vibration on compression behavior and microstructural characteristics of commercially pure aluminum. J Mater Eng Perform. 2015;24(11):4364–4376.
   Web of Science ®Google Scholar
• Graff K. Ultrasonic metal forming: materials. Power Ultrasonics: Elsevier. 2015: 337–376. 10.1016/B978-1-78242-028-6.00014-4.
   Google Scholar
• Langenecker B. Effects of ultrasound on deformation characteristics of metals. IEEE Trans Sonics Ultrason. 1966;13(1):1–8.
   Web of Science ®Google Scholar
• Izumi O, Oyama K, Suzuki Y. Effects of superimposed ultrasonic vibration on compressive deformation of metals. Trans Jpn Inst Met. 1966;7(3):162–167.
   Google Scholar
• Rahmatabadi D, Hashemi R, Mohammadi B, et al. Experimental evaluation of the plane stress fracture toughness for ultra-fine grained aluminum specimens prepared by accumulative roll bonding process. Mater Sci Eng: A. 2017;708:301–310.
   Web of Science ®Google Scholar
• Rahmatabadi D, Hashemi R, Tayyebi M, et al. Investigation of mechanical properties, formability, and anisotropy of dual phase Mg–7Li–1Zn. Mater Res Express. 2019;6(9):096543.
   Web of Science ®Google Scholar
• Najafizadeh N, Rajabi M, Hashemi R, et al. Improved microstructure and mechanical properties of sheet metals in ultrasonic vibration enhanced biaxial stretch forming. J Theor Appl Vib Acous. 2019;5(1):1–10.
   Google Scholar
• Karajibani E, Hashemi R, Sedighi M. Forming limit diagram of aluminum-copper two-layer sheets: numerical simulations and experimental verifications. Int J Adv Manuf Technol. 2017;90(9):2713–2722.
   Web of Science ®Google Scholar
• Rahmatabadi D, Shahmirzaloo A, Farahani M, et al. Characterizing the elastic and plastic properties of the multilayered Al/brass composite produced by ARB using DIC. Mater Sci Eng: A. 2019;753:70–78.
   Web of Science ®Google Scholar
• Tayyebi M, Rahmatabadi D, Adhami M, et al. Influence of ARB technique on the microstructural, mechanical and fracture properties of the multilayered Al1050/Al5-052 composite reinforced by SiC particles. J Mater Res Technol. 2019;8(5):4287–4301.
   Google Scholar
• Macwan A, Jiang X, Li C, et al. Effect of annealing on interface microstructures and tensile properties of rolled Al/Mg/Al tri-layer clad sheets. Mater Sci Eng: A. 2013;587:344–351.
   Web of Science ®Google Scholar
• Lee KS, Yoon DH, Kim HK, et al. Effect of annealing on the interface microstructure and mechanical properties of a STS–Al–Mg 3-ply clad sheet. Mater Sci Eng: A. 2012;556:319–330.
   Web of Science ®Google Scholar
• Chang H, Zheng M, Xu C, et al. Microstructure and mechanical properties of the Mg/Al multilayer fabricated by accumulative roll bonding (ARB) at ambient temperature. Maters Sci Eng: A. 2012;543:249–256.
   Web of Science ®Google Scholar
• Amini S, Hosseinpour GA, Paktinat H. An investigation of conventional and ultrasonic-assisted incremental forming of annealed AA1050 sheet. Int J Adv Manuf Technol. 2017;90(5-8):1569–1578.
   Web of Science ®Google Scholar
• Ahmadi F, Farzin M, Mandegari M. Effect of grain size on ultrasonic softening of pure aluminum. Ultrasonics. 2015;63:111–117.
   PubMed Web of Science ®Google Scholar