References
- Bhaduri AK, Laha K. Development of improved materials for structural components of sodium-cooled fast reactors. Procedia Eng. 2015;130:598–608.
- Tseng KH, Hsu CY. Performance of activated TIG process in austenitic stainless steel welds. J Mater Process Technol [Internet]. 2011;211:503–512. Available from: doi:https://doi.org/10.1016/j.jmatprotec.2010.11.003.
- Sireesha M, Shankar V, Albert SK, et al. Microstructural features of dissimilar welds between 316LN austenitic stainless steel and alloy 800. Mater Sci Eng A. 2000;292:74–82.
- DuPont JN. Microstructural evolution and high temperature failure of ferritic to austenitic dissimilar welds. Int Mater Rev. 2012;57:208–234.
- Bhaduri AK, Venkadesan S, Rodriguez P, et al. Performance of a trimetallic transition joint. Mater High Temp. 1992;10:45–50.
- Bhaduri AK, Venkadesan S, Rodriguez P, et al. Transition metal joints for steam generators-An overview. Int J Press Vessel Pip. 1994;58:251–265.
- Karthick K, Malarvizhi S, Balasubramanian V, et al. Tensile properties variation across the dissimilar metal weld joint between modified 9Cr–1Mo ferritic steel and 316LN stainless steel at RT and 550 °C. Metallogr Microstruct Anal [Internet]. 2018;7:209–221. Available from: doi:https://doi.org/10.1007/s13632-018-0430-9.
- Rathod DW, Singh PK, Pandey S, et al. Effect of buffer-layered buttering on microstructure and mechanical properties of dissimilar metal weld joints for nuclear plant application. Mater Sci Eng A [Internet]. 2016;666:100–113. Available from: doi:https://doi.org/10.1016/j.msea.2016.04.053.
- Joseph A, Rai SK, Jayakumar T, et al. Evaluation of residual stresses in dissimilar weld joints. Int J Press Vessel Pip. 2005;82:700–705.
- Wang WK, Liu Y, Zhang QB, et al. Microstructure and local mechanical properties of a dissimilar metal welded joint with buttering layer in steam turbine rotor. Mater Sci Eng A [Internet]. 2019;747:244–254. Available from: doi:https://doi.org/10.1016/j.msea.2018.12.018.
- Ghosh M, Santosh R, Das SK, et al. Effect of structural heterogeneity on in situ deformation of dissimilar weld between ferritic and austenitic steel. Metall Mater Trans A Phys Metall Mater Sci. 2015;46:3555–3568.
- Sarikka T, Ahonen M, Mouginot R, et al. Microstructural, mechanical, and fracture mechanical characterization of SA 508-alloy 182 dissimilar metal weld in view of mismatch state. Int J Press Vessel Pip [Internet]. 2016;145:13–22. Available from: doi:https://doi.org/10.1016/j.ijpvp.2016.06.004.
- Shariatpanahi AM, Farhangi H. Microstructure and mechanical properties of dissimilar ferritic and austenitic steel joints with an intermediate inconel-182 buttering layer. Adv Mater Res [Internet]. 2009;83–86:449–456. Available from: http://www.scientific.net/AMR.83-86.449.
- Sireesha M, Albert SK, Sundaresan S. Influence of high-temperature exposure on the microstructure and mechanical properties of dissimilar metal welds between modified 9Cr-1Mo steel and alloy 800. Metall Mater Trans a. 2005;36:1495–1506.
- Karthick K, Malarvizhi S, Balasubramanian V, et al. Tensile and impact toughness properties of various regions of dissimilar joints of nuclear grade steels. Nucl Eng Technol [Internet]. 2018;50:116–125. Available from: doi:https://doi.org/10.1016/j.net.2017.10.003.
- Taraphdar PK, Mahapatra MM, Pradhan AK, et al. Effects of groove configuration and buttering layer on the through-thickness residual stress distribution in dissimilar welds. Int J Press Vessel Pip. 2021;192:104392.
- Winarto W, Anis M, Hertanto TP. Mechanical properties and microstructure of welded dissimilar metals using buttering & non-buttering layer. Adv Mater Res. 2013;789:341–346.
- Saffari H, Shamanian M, Bahrami A, et al. Effects of ERNiCr-3 butter layer on the microstructure and mechanical properties of API 5L X65/AISI304 dissimilar joint. J Manuf Process. 2020;50:305–318.
- Karthick K, Malarvizhi S, Balasubramanian V, et al. Tensile properties of shielded metal arc welded dissimilar joints of nuclear grade ferritic steel and austenitic stainless steel. J Mech Behav Mater [Internet]. 2016;25:171–178. Available from: https://www.degruyter.com/document/doi/https://doi.org/10.1515/jmbm-2017-0005/html.
- Karthick K, Malarvizhi S, Balasubramanian V. Evolution of microstructure at the interface region between parent metal (modified 9Cr–1Mo steel) and buttering layer (alloy 182) in dissimilar joints. J Adv Microsc Res [Internet]. 2017;12:167–172. Available from: https://www.ingentaconnect.com/content/asp/jamr/2017/00000012/00000003/art00002.
- Karthick K, Malarvizhi S, Balasubramanian V, et al. Microstructural characteristics and mechanical properties of dissimilar joints of AISI 316LN austenitic stainless steel and modified 9cr-1Mo steel. Indian Weld J [Internet]. 2017;50:39–46. Available from: https://web.b.ebscohost.com/abstract?direct=true&profile=ehost&scope=site&authtype=crawler&jrnl=00469092&AN=127389178&h=WbVOSSs0If83voSTAIVmfqxVuUKEUSEURiIXEcf2tL8HukcDxGKwtB0H8KMEAGKyAZDzb9NA%2FadrAFdeAMTQxQ%3D%3D&crl=c&resultNs=AdminWebAuth&resultLocal=.
- Jones WB, Hills CR, Polonis DH. Microstructural evolution of modified 9Cr-1Mo steel. Metall Trans A. 1991;22:1049–1058.
- Ganesan V, Mathew MD, Sankara Rao KB. Influence of nitrogen on tensile properties of 316LN SS. Mater Sci Technol [Internet]. 2009;25:614–618. Available from: http://www.maneyonline.com/doi/abs/https://doi.org/10.1179/174328408X317066.
- Thakare JG, Pandey C, Gupta A, et al. Role of the heterogeneity in microstructure on the mechanical performance of the Autogenous Gas Tungsten Arc (GTA) welded dissimilar joint of F/M P91 and SS304L steel. Fusion Eng Des. 2021;168:112616.
- Sirohi S, Pandey C, Goyal A. Role of the Ni-based filler (IN625) and heat-treatment on the mechanical performance of the GTA welded dissimilar joint of P91 and SS304H steel. J Manuf Process. 2021;65:174–189.
- Lippold JC, Kotecki DJ. Welding metallurgy and weldability of stainless steels. Wiley; 2005.
- Nelson TW, Lippold JC, Mills MJ. Investigation of boundaries and structures in dissimilar metal welds. Sci Technol Weld Join. 1998;3:249–255.
- Wu Q, Xu Q, Jiang Y, et al. Effect of carbon migration on mechanical properties of dissimilar weld joint. Eng Fail Anal [Internet]. 2020;117:104935. Available from: doi:https://doi.org/10.1016/j.engfailanal.2020.104935.
- Siefert JA, Shingledecker JP, DuPont JN, et al. Weldability and weld performance of candidate nickel based superalloys for advanced ultrasupercritical fossil power plants part II: weldability and cross-weld creep performance. Sci Technol Weld Join. 2016;21:397–427.
- Kou S, Yang YK. Fusion-boundary macrosegregation in dissimilar-filler welds. Weld J (Miami, Fla). 2007;86:303–312.
- Pavan AHV, Vikrant KSN, Ravibharath R, et al. Development and evaluation of SUS 304H - IN 617 welds for advanced ultra supercritical boiler applications. Mater Sci Eng A [Internet]. 2015;642:32–41. Available from: doi:https://doi.org/10.1016/j.msea.2015.06.065.
- Ma C, Mei J, Peng Q, et al. Microstructure characterization of the fusion zone of an alloy 600-82 weld joint. J Mater Sci Technol [Internet]. 2015;31:1011-1017. Available from: doi:https://doi.org/10.1016/j.jmst.2015.08.013.
- Ming H, Zhang Z, Wang J, et al. Microstructure of a safe-end dissimilar metal weld joint (SA508-52-316L) prepared by narrow-gap GTAW. Mater Charact [Internet]. 2017;123:233–243. Available from: doi:https://doi.org/10.1016/j.matchar.2016.11.029.
- Pandey C. Mechanical and metallurgical characterization of dissimilar P92/SS304 L welded joints under varying heat treatment regimes. Metall Mater Trans A Phys Metall Mater Sci [Internet]. 2020;51:2126–2142. Available from: doi:https://doi.org/10.1007/s11661-020-05660-0.
- Falat L, Svoboda M, Výrostková A, et al. Microstructure and creep characteristics of dissimilar T91/TP316H martensitic/austenitic welded joint with Ni-based weld metal. Mater Charact [Internet]. 2012;72:15–23. Available from: doi:https://doi.org/10.1016/j.matchar.2012.06.014.
- Jayakumar T, Mathew MD, Laha K. High temperature materials for nuclear fast fission and fusion reactors and advanced fossil power plants. Procedia Eng [Internet]. 2013;55:259–270. Available from: doi:https://doi.org/10.1016/j.proeng.2013.03.252.
- Vijayanand VD, Ganesan V, Laha K. New insights to damage initiation during creep deformation of stainless steel weld joints. Mater Sci Eng A [Internet]. 2017;703:37–44. Available from: http://linkinghub.elsevier.com/retrieve/pii/S0921509317309516.
- Pandey C, Giri A, Mahapatra MM, et al. Characterization of microstructure of HAZs in as-welded and service condition of P91 pipe weldments. Met Mater Int. 2017;23:148–162.