Properties of TiC_p/Cu composites fabricated by powder metallurgy and electrodeless copper plating

References

• Wang T, Zou C, Chen Z, et al. In situ synthesis of TiB2 particulate reinforced copper matrix composite with a rotating magnetic field. Mater Des. 2015;65:280–288.
   Web of Science ®Google Scholar
• Wang F, Li Y, Wang X, et al. In-situ fabrication and characterization of ultrafine structured Cu-TiC composites with high strength and high conductivity by mechanical milling. J Alloys Compd. 2016;657:122–132.
   Web of Science ®Google Scholar
• Gao X, Yue H, Guo E, et al. Mechanical properties and thermal conductivity of graphene reinforced copper matrix composites. Powder Technol. 2016;301:601–607.
   Web of Science ®Google Scholar
• Shi X, Yan W, Xu D, et al. Microbial corrosion resistance of a novel Cu-bearing pipeline steel. J Mater Sci Technol. 2018;34(12):2480–2491.
   Web of Science ®Google Scholar
• Xu N, Song Q, Bao Y, et al. Achieving good strength-ductility synergy of friction stir welded Cu joint by using large load with extremely low welding speed and rotation rate. Mater Sci Eng A. 2017;687:73–81.
   Web of Science ®Google Scholar
• Chen F, Ying J, Wang Y, et al. Effects of graphene content on the microstructure and properties of copper matrix composites. Carbon. 2016;96:836–842.
   Web of Science ®Google Scholar
• Shen DP, Zhu YJ, Yang X, et al. Investigation on the microstructure and properties of Cu-Cr alloy prepared by in-situ synthesis method. Vacuum. 2018;149:207–213.
   Web of Science ®Google Scholar
• Qiu F, Han Y, Cheng A, et al. Effect of Cr content on the compression properties and abrasive wear behavior of the high-volume fraction (TiC-TiB2)/Cu composites. Acta Metall Sin (English Lett). 2014;27(5):951–956.
   Web of Science ®Google Scholar
• Yu Z, Zhu H, Huang J, et al. Processing and characterization of in-situ ultrafine TiB2-Cu composites from Ti-B-Cu system. Powder Technol. 2017;320:66–72.
   Web of Science ®Google Scholar
• Han T, Li J, Zhao N, et al. In-situ fabrication of nano-sized TiO2 reinforced Cu matrix composites with well-balanced mechanical properties and electrical conductivity. Powder Technol. 2017;321:66–73.
   Web of Science ®Google Scholar
• Gao L, Yang X, Zhang X, et al. Aging behavior and phase transformation of the Cu-0.2 wt%Zr-0.15 wt%Y alloy. Vacuum. 2019;159:367–373.
   Web of Science ®Google Scholar
• Zhang Y, Li Y, Li Y, et al. TMOs@Gr/Cu composites: microstructure and properties. Mater Des. 2019;182:108030.
   Web of Science ®Google Scholar
• Tian WS, Zhao QL, Geng R, et al. Improved creep resistance of Al-Cu alloy matrix composite reinforced with bimodal-sized TiCp. Mater Sci Eng A. 2018;713:190–194.
   Web of Science ®Google Scholar
• Ding H, Jia H, Chu W, et al. The in-situ synthesized of TiC in Al melts based on Ti–Si-diamond system and its morphologies. J Mater Res Technol. 2020;9(3):3865–3874.
   Google Scholar
• Zhai W, Zhu Z, Zhou W, et al. Selective laser melting of dispersed TiC particles strengthened 316L stainless steel. Compos Part B Eng. 2020;199:108291.
   Web of Science ®Google Scholar
• Hu ZJ, Shen P, Jiang QC. Developing high-performance laminated Cu/TiC composites through melt infiltration of Ni-doped freeze-cast preforms. Ceram Int. 2019;45(9):11686–11693.
   Web of Science ®Google Scholar
• Sribalaji M, Mukherjee B, Bakshi SR, et al. In-situ formed graphene nanoribbon induced toughening and thermal shock resistance of spark plasma sintered carbon nanotube reinforced titanium carbide composite. Compos Part B Eng. 2017;123:227–240.
   Web of Science ®Google Scholar
• Xu X, Li W, Wang Y, et al. Study of the preparation of Cu-TiC composites by reaction of soluble Ti and ball-milled carbon coating TiC. Results Phys. 2018;9:486–492.
   Web of Science ®Google Scholar
• Ni S, Jiang J, Chen J, et al. Microstructure and properties of in-situ synthesized Cu-1 wt%TiC alloy followed by ECAP and post-annealing. Prog Nat Sci Mater Int. 2016;26(6):643–649.
   Web of Science ®Google Scholar
• Sadeghi N, Aghajani H, Akbarpour MR. Microstructure and tribological properties of in-situ TiC-C/Cu nanocomposites synthesized using different carbon sources (graphite, carbon nanotube and graphene) in the Cu-Ti-C system. Ceram Int. 2018;44(18):22059–22067.
   Web of Science ®Google Scholar
• Xia F, Liang MX, Gao XS, et al. Instability of in situ TiC particles in an Al-12Si alloy. J Mater Res Technol. 2020;9(5):11361–11369.
   Google Scholar
• Liang Y, Han Z, Li X, et al. Study on the reaction mechanism of self-propagating high-temperature synthesis of TiC in the Cu-Ti-C system. Mater Chem Phys. 2012;137(1):200–206.
   Web of Science ®Google Scholar
• Bagheri GA. The effect of reinforcement percentages on properties of copper matrix composites reinforced with TiC particles. J Alloys Compd. 2016;676:120–126.
   Web of Science ®Google Scholar
• Wang X, Ding H, Qi F, et al. Mechanism of in situ synthesis of TiC in Cu melts and its microstructures. J Alloys Compd. 2017;695:3410–3418.
   Web of Science ®Google Scholar
• Ni J, Li J, Luo W, et al. Microstructure and properties of in-situ TiC reinforced copper nanocomposites fabricated via long-term ball milling and hot pressing. J Alloys Compd. 2018;755:24–28.
   Web of Science ®Google Scholar
• Zhang X, Sun Y, Niu M, et al. Microstructure and mechanical behavior of in situ TiC reinforced Fe3Al(Fe–23Al–3Cr)matrix composites by mechanical alloying and vacuum hot-pressing sintering technology. Vacuum. 2020;180:109544.
   Web of Science ®Google Scholar
• Zhang D, Liu Y, Gao Y, et al. Study on electroless Cu plating quality of in situ TiCp. Sci Rep. 2020;10(1):12196.
   PubMed Web of Science ®Google Scholar
• Purcek G, Yanar H, Demirtas M, et al. Optimization of strength, ductility and electrical conductivity of Cu–Cr–Zr alloy by combining multi-route ECAP and aging. Mater Sci Eng A. 2016;649:114–122.
   Web of Science ®Google Scholar
• Lu J, Shu S, Qiu F, et al. Compression properties and abrasive wear behavior of high volume fraction TiCx–TiB2/Cu composites fabricated by combustion synthesis and hot press consolidation. Mater Des. 2012;40:157–162.
   Web of Science ®Google Scholar
• Xiong N, Bao R, Yi J, et al. CNTs/Cu-Ti composites fabrication through the synergistic reinforcement of CNTs and in situ generated nano-TiC particles. J Alloys Compd. 2019;770:204–213.
   Web of Science ®Google Scholar