187
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Tensile twin evolution of Mg–3Al–1Zn magnesium alloy during high-strain rate deformation

, , &
Pages 1452-1464 | Received 22 Jul 2021, Accepted 05 Dec 2021, Published online: 20 Dec 2021

References

  • Zhang F, Hao M, Wang FC, et al. Role of {10–12} twinning and detwinning in the shock-hardening behavior of rolled Mg–3Al–1Zn alloy. Scr Mater. 2012;67:951–954.
  • Watanabe H, Ishikawa K. Effect of texture on high temperature deformation behavior at high strain rates in a Mg–3Al–1Zn alloy. Mater Sci Eng A. 2009;523:304–311.
  • Dong S, Qin Y, Jiang Y, et al. Characteristic cyclic plastic deformation in ZK60 magnesium alloy. Int J Plast. 2017;91:25–47.
  • Levesque J, Mohammadi M, Mishra RK, et al. An extended Taylor model to simulate localized deformation phenomena in magnesium alloys. Int J Plast. 2016;78:203–222.
  • Wu W, Gao Y, Li N, et al. Intergranular twinning, detwinning and twinning-like lattice reorientation in magnesium alloys. Acta Mater. 2016;121:15–23.
  • Kim YK, Sohn SW, Kim DH, et al. Role of icosahedral phase in enhancing the strength of Mg–Sn–Zn–Al alloy. J Alloy Compd. 2013;549:46–50.
  • Jain A, Agnew SR. Modeling the temperature dependent effect of twinning on the behavior of magnesium alloy AZ31B sheet. Mater Sci Eng A. 2007;462:29–36.
  • Chen J, Liu TM, Lu LW, et al. Microstructure and mechanical property of rolled-weld magnesium alloy AZ31. Mater Des. 2012;36:577–583.
  • Wang YN, Huang JC. The role of twinning and untwinning in yielding behavior in hot-extruded Mg–Al–Zn alloy. Acta Mater. 2007;55:597–905.
  • Xin YC, Zhou XJ, Liu Q. Suppressing the tension-compression yield asymmetry of Mg alloy by hybrid extension twins structure. Mater Sci Eng A. 2013;567:9–13.
  • Zhang D, Wen HM, Kumar MA, et al. Yield symmetry and reduced strength differential in Mg–2.5Y alloy. Acta Mater. 2016;120:75–85.
  • Lv CL, Liu TM, Liu DJ, et al. Effect of heat treatment on tension-compression yield asymmetry of AZ80 magnesium alloy. Mater Des. 2012;33:529–533.
  • He JJ, Liu TM, Xu S, et al. The effects of compressive pre-deformation on yield asymmetry in hot-extruded Mg–3Al–1Zn alloy. Mater Sci Eng A. 2013;579:1–8.
  • Bohlen J, Nrnberg MR, Senn JW, et al. The texture and anisotropy of magnesium–zinc–rare earth alloy sheets. Acta Mater. 2017;55:2102–2112.
  • Liu YY, Mao PL, Wang F, et al. Effect of temperature on the anisotropy of AZ31 magnesium alloy rolling sheet under high strain rate deformation. Philos Mag Lett. 2018;98:1068–1086.
  • Hong SG, Park SH, Lee CS. Role of {10–12} twinning characteristics in the deformation behavior of a polycrystalline magnesium alloy. Acta Mater. 2010;58:5873–5885.
  • Barnett MR, Nave MD, Ghaderi A. Yield point elongation due to twinning in a magnesium alloy. Acta Mater. 2012;60:1433–1443.
  • Mao PL, Liu Z, Wang CY. Texture effect on high strain rates tension and compression deformation behavior of extruded AM30 alloy. Mater Sci Eng A. 2012;539:13–21.
  • Lee OS, Choi HB, Kim HM. High-temperature dynamic deformation of aluminum alloys using SHPB. J Mech Sci Technol. 2011;25:143–148.
  • Long ZX, Liu TM, He JJ, et al. The effects of pre-strain and subsequent annealing on the yielding behavior in a rolled magnesium alloy AZ31. J Mater Eng Perform. 2015;24:16–23.
  • Wang RF, Mao PL, Liu YY, et al. Influence of pre-twinning on high strain rate compressive behavior of AZ31 Mg-alloys. Mater Sci Eng A. 2018;742:309–317.
  • Wang BS, Xin RL, Huang GJ, et al. Effect of crystal orientation on the mechanical properties and strain hardening behavior of magnesium alloy AZ31 during uniaxial compression. Mater Sci Eng A. 2012;534:588–593.
  • Dudamell NV, Ulacia I, Glvez F, et al. Twinning and grain subdivision during dynamic deformation of a Mg AZ31 sheet alloy at room temperature. Acta Mater. 2011;59:6949–6962.
  • Song B, Xin RL, Guo N, et al. Research progress of strain hardening behavior at room temperature in wrought magnesium alloys. Chin J Nonferrous Met. 2014;24:2699–2710.
  • Jonas J, Mu S, Al-Samman T, et al. The role of strain accommodation during the variant selection of primary twins in magnesium. Acta Mater. 2011;59:2046–2056.
  • Wang BS, Shi JJ, Ye P, et al. Analysis of 10–12 twinning variants selection behavior during multi-directional compression in Mg–3Al–1Zn magnesium alloy. J Mater Sci. 2019;55:9797–9808.
  • Wang B, Deng L, Guo N, et al. EBSD analysis of 10–12 twinning activity in Mg–3Al–1Zn alloy during compression. Mater Charact. 2014;98:180–185.
  • Kuang XL, Liu TM, He JJ. Evolution of texture and yielding behavior induced by 10–12 twinning of magnesium alloy. Chin J Nonferrous Met. 2014;24:1111–1117.
  • Liu YY, Mao PL, Liu Z, et al. Theoretical calculation of Schmid factor and its application under high strain rate deformation in magnesium alloys. Acta Metal Sin. 2018;54:950–958.
  • Chapuis A, Xin YC, Zhou XJ, et al. 10–12 twin variants selection mechanisms during twinning, re-twinning and detwinning. Mater Sci Eng A. 2014;612:431–439.
  • Guo CF, Xin RL, Ding CH, et al. Understanding of variant selection and twin patterns in compressed Mg alloy sheets via combined analysis of Schmid factor and strain compatibility factor. Mater Sci Eng A. 2014;609:92–101.
  • Barnett MR, Ghaderi A, Quinta da Fonseca J, et al. Influence of orientation on twin nucleation and growth at low strains in a magnesium alloy. Acta Mater. 2014;80:380–391.
  • Wang L, Eisenlohr P, Yang Y, et al. Nucleation of paired twins at grain boundaries in titanium. Scr Mater. 2010;63:827–830.
  • Liu DJ, Xin RL, Xiao Y, et al. Strain localization in friction stir welded magnesium alloy during tension and compression deformation. Mater Sci Eng A. 2014;609:88–91.
  • Meyers MA, Vohringer O, Lubarda VA. The onset of twinning in metals: a constitutive description. Acta Mater. 2001;49:4025–4039.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.