Microstructure and corrosion behaviour of WC/NiCrBSi coatings by vacuum cladding

References

• Karimi M, Salimijazi H, Golozar M. Effects of remelting processes on porosity of NiCrBSi flame sprayed coatings. Surf Eng. 2016;32(3):238–243.
   Web of Science ®Google Scholar
• Sidhu T, Prakash S, Agrawal R. Hot corrosion behaviour of HVOF-sprayed NiCrBSi coatings on Ni-and Fe-based superalloys in Na2SO4-60% V2O5 environment at 900 ℃. Acta Mater. 2006;54(3):773–784.
   Web of Science ®Google Scholar
• Shi B, Li T, Wang D. Investigation on crack behavior of Ni60A alloy coating produced by coaxial laser cladding. Mater Sci Tech. 2021;23(56):13323–13336.
   Google Scholar
• Tobar M, Álvarez C, Amado J, et al. Morphology and characterization of laser clad composite NiCrBSi-WC coatings on stainless steel. Surf Coat Tech. 2006;200(22–23):6313–6317.
   Web of Science ®Google Scholar
• Hulka I, Utu D, Serban V, et al. Effect of Ti addition on microstructure and corrosion properties of laser cladded WC-Co/NiCrBSi(Ti) coatings. Appl Surf Sci. 2020;504:144349.
   Web of Science ®Google Scholar
• Jiang P, Zhang C, Zhang S, et al. Fabrication and wear behavior of TiC reinforced FeCoCrAlCu-based high entropy alloy coatings by laser surface alloying. Mater Chem Phys. 2020;255:123571.
   Web of Science ®Google Scholar
• He L, Tan Y, Tan H, et al. Tribological properties of nanostructured Al2O3-40%TiO2 multiphase ceramic particles reinforced Ni-based alloy composite coatings. T Nonferr Metal Soc. 2013;23:2618–2627.
   Web of Science ®Google Scholar
• Singh S, Maurya A, Gupta R. Improved microwave absorption behavioral response of Ni/SiC and Ni/SiC/graphene composites: A comparative insight. J Alloy Compd. 2020;823:153780.
   Web of Science ®Google Scholar
• Wang S, Zhang S, Zhang C, et al. Effect of Cr3C2 content on 316L stainless steel fabricated by laser melting deposition. Vacuum. 2018;147:92–98.
   Web of Science ®Google Scholar
• Kaushal S, Singh D, Gupta D, et al. On the development and characterization of microwave processed Ni + 30% SiC based composite clads. Mater Today. 2018;5(14):27718–27725.
   Google Scholar
• Yadav S, Zhang QF, Behera A. Role of binder phase on the microstructure and mechanical properties of a mechanically alloyed and spark plasma sintered WC-FCC HEA composites. J Alloy Compd. 2021;877:160265.
   Web of Science ®Google Scholar
• Kılıçay K, Buytoz S, Ulutan M. Microstructural and tribological properties of induction cladded NiCrBSi /WC composite coatings. Surf Coat Tech. 2020;397:125974.
   Web of Science ®Google Scholar
• Yao S. Tribological behaviour of NiCrBSi-WC(Co) coatings. Mater Res Innov. 2014;18:332–337.
   Google Scholar
• Lyu Y, Sun Y, Yang Y. Non-vacuum sintering process of WC/W2C reinforced Ni-based coating on steel. Met Mater Inter. 2016;22(2):311–318.
   Web of Science ®Google Scholar
• Lee J, Ryu W, Yoon K. In-situ synthesis of Mg-based bulk metallic glass matrix composites with primary alpha-Mg phases. J Alloy Compd. 2021;879:160417.
   Web of Science ®Google Scholar
• Yuan Y, Li Z. A novel approach of in-situ synthesis of WC particulate-reinforced Fe-30Ni ceramic metal coating. Surf Coat Tech. 2017;328:256–265.
   Web of Science ®Google Scholar
• Zhang L, Zhao Z, Bai P, et al. EBSD investigation on microstructure evolution of in-situ synthesized TiC/Ti6Al4V composite coating. Mater Lett. 2021: 290:129449.
   Web of Science ®Google Scholar
• Wang H, Zhang S, Zhang C, et al. Effects of V and Cr on laser cladded Fe-based coatings. Coatings. 2018;8:107.
   Web of Science ®Google Scholar
• Shu D, Li Z, Yao C, et al. In situ synthesised WC reinforced nickel coating by laser cladding. Surf Eng. 2017;34(4):1–7.
   Web of Science ®Google Scholar
• Lekatou A, Karantzalis AE, Evangelou A, et al. Aluminium reinforced by WC and TiC nanoparticles (ex-situ) and aluminide particles (in-situ): microstructure, wear and corrosion behaviour. Mater Des. 2015;65:1121–1135.
   Web of Science ®Google Scholar
• Yang G, Song W, Wang N, et al. Fabrication and formation mechanism of vacuum cladding Ni/WC/GO composite fusion coatings. Mater Today Commun. 2020;25:101342.
   Web of Science ®Google Scholar
• Tao X, Zhang S, Wu C, et al. In situ synthesised WC-reinforced Co-based alloy layer by vacuum cladding. Surf Eng. 2018;34(4):316–323.
   Web of Science ®Google Scholar
• Cui X, Zhang S, Wang C, et al. Microstructure and fatigue behavior of a laser additive manufactured 12CrNi2 low alloy steel. Mater Sci Eng A. 2020;772:138685.
   Web of Science ®Google Scholar
• Yuan J, Wang Q, Liu X, et al. Microstructures and high-temperature wear behavior of NiAl/WC-Fex coatings on carbon steel by plasma cladding. J Alloy Compd. 2020;842:155850.
   Web of Science ®Google Scholar
• Salimi A, Sanjabi S. Influence of Cu shell on the anomalous WC grain growth in Ni-base brazed cladding. Surf Coat Tech. 2019;360:335–346.
   Web of Science ®Google Scholar
• Tang X, Zhang S, Cui X, et al. Tribological and cavitation erosion behaviors of nickel-based and iron-based coatings deposited on AISI 304 stainless steel by cold metal transfer. J Mater Res Technol. 2020;9:6665–6681.
   Google Scholar
• Sia C, Duana B, Zhang Q, et al. Microstructure, corrosion-resistance, and wear-resistance properties of subsonic flame sprayed amorphous Fe-Mo-Cr-Co coating with extremely high amorphous rate. J Mater Res Technol. 2020;9(3):3292–3303.
   Google Scholar
• Jiang P, Zhang C, Zhang S, et al. Microstructure evolution, wear behavior, and corrosion performance of alloy steel gradient material fabricated by direct laser deposition. J Mater Res Technol. 2020;9:11702–11716.
   Google Scholar
• Zhao G, Wang K. Effect of La2O3 on corrosion resistance of laser clad ferrite-based alloy coatings. Corros Sci. 2006;48:273–284.
   Web of Science ®Google Scholar
• Hong S, Wu Y, Wu J, et al. Effect of flow velocity on cavitation erosion behavior of HVOF sprayed WC-10Ni and WC-20Cr(3)C(2)-7Ni coatings. Int J Refract Met H. 2020;92:105330.
   Web of Science ®Google Scholar