References
- Ma K, Wen H, Hu T, et al. Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy. Acta Mater. 2014;62:141–155. doi:https://doi.org/10.1016/j.actamat.2013.09.042.
- Rezaee-Bazzaz A, Ahmadian S, Reihani H. Modeling of microstructure and mechanical behavior of ultra fine grained aluminum produced by accumulative roll-bonding. Mater Des. 2011;32:4580–4585. doi:https://doi.org/10.1016/j.matdes.2011.04.011.
- Lang Y, Zhou G, Hou L, et al. Significantly enhanced the ductility of the fine-grained Al-Zn-Mg-Cu alloy by strain-induced precipitation. Mater Des. 2015;88:625–631. doi:https://doi.org/10.1016/j.matdes.2015.09.023.
- Nayeb-Hashemi H, Lockwood M. The effect of processing variables on the microstructures and properties of aluminum brazed joints. J Mater Sci. 2002;37:3705–3713. doi:https://doi.org/10.1023/A:1016517510260.
- Bazhenov VE, Pashkov IN, Pikunov MV, et al. Interaction of Zn and Zn - 4Al, Zn - 15Al (wt-%) solder alloys with aluminium. Mater Sci Technol (United Kingdom). 2016;32:752–759. doi:https://doi.org/10.1179/1743284715Y.0000000135.
- Yang J, Xue S, Xue P, et al. Development of novel CsF-RbF-AlF3 flux for brazing aluminum to stainless steel with Zn-Al filler metal. Mater Des. 2014;64:110–115. doi:https://doi.org/10.1016/j.matdes.2014.07.059.
- Xiao B, Wang D, Cheng F, et al. Development of ZrF4-containing CsF-AlF3 flux for brazing 5052 aluminium alloy with Zn-Al filler metal. Mater Des. 2016;90:610–617. doi:https://doi.org/10.1016/j.matdes.2015.11.025.
- Li YX, Zhao WW, Leng XS, et al. Microstructure evolution and mechanical properties of ultrasonic-assisted soldering joints of 2024 aluminum alloys. Trans Nonferrous Met Soc China (English Ed). 2011;21:1937–1943. doi:https://doi.org/10.1016/S1003-6326(11)60953-9.
- Nagaoka T, Morisada Y, Fukusumi M, et al. Selection of soldering temperature for ultrasonic-assisted soldering of 5056 aluminum alloy using Zn-Al system solders. J Mater Process Technol. 2011;211:1534–1539. doi:https://doi.org/10.1016/j.jmatprotec.2011.04.004.
- Guo W, Luan T, He J, et al. Ultrasonic-assisted soldering of fine-grained 7034 aluminum alloys using ZnAl filler metals. Mater Des. 2017;125:85–93. doi:https://doi.org/10.1016/j.matdes.2017.03.073.
- Shaffer J, Maassen K, Wilson C, et al. Development of an open-sourced automated ultrasonic-assisted soldering system. J Manuf Process. 2019;47:284–290. doi:https://doi.org/10.1016/j.jmapro.2019.09.007.
- Gheybi Hashemabad S, Gu Z, Ando T. Flux-less direct soldering of aluminum by ultrasonic surface activation. J Mater Process Technol. 2016;233:135–141. doi:https://doi.org/10.1016/j.jmatprotec.2016.02.015.
- Wan L, Huang Y, Huang T, et al. Novel method of fluxless soldering with self-abrasion for fabricating aluminum foam sandwich. J Alloys Compd. 2015;640:1–7. doi:https://doi.org/10.1016/j.jallcom.2015.04.005.
- Shirzadi AA, Saindrenan G. New method for flux free diffusion brazing of aluminium alloys using liquid gallium (UK patent application 0128623.6). Sci Technol Weld Join. 2003;8:149–153. doi:https://doi.org/10.1179/136217103225010871.
- Ferchaud E, Christien F, Barnier V, et al. Characterisation of Ga-coated and Ga-brazed aluminium. Mater Charact. 2012;67:17–26. doi:https://doi.org/10.1016/j.matchar.2012.02.013.
- Niu T, Hou H, Wang Y, et al. Effect of high uniform magnetic field on joining property and element diffusion of 1420 Al-Li alloy. Trans China Weld Inst. 2016;37:1–5.
- Shimizu T, Ishikawa H, Ohnuma I, et al. Zn-Al-Mg-Ga alloys as Pb-free solder for die-attaching use. J Electron Mater. 1999;28:1172–1175. doi:https://doi.org/10.1007/s11664-999-0153-4.
- Kravchenko OV, Semenenko KN, Bulychev BM, et al. Activation of aluminum metal and its reaction with water. J Alloys Compd. 2005;397:58–62. doi:https://doi.org/10.1016/j.jallcom.2004.11.065.
- Xu Z, Yan J, Wang C, et al. Substrate oxide undermining by a Zn-Al alloy during wetting of alumina reinforced 6061 Al matrix composite. Mater Chem Phys. 2008;112:831–837. doi:https://doi.org/10.1016/j.matchemphys.2008.06.056.
- Nam HS, Srolovitz DJ. Effect of material properties on liquid metal embrittlement in the Al-Ga system. Acta Mater. 2009;57:1546–1553. doi:https://doi.org/10.1016/j.actamat.2008.11.041.
- Senel E, Walmsley JC, Diplas S, et al. Liquid metal embrittlement of aluminium by segregation of trace element gallium. Corros Sci. 2014;85:167–173. doi:https://doi.org/10.1016/j.corsci.2014.04.012.
- Chang CC, Uan JY. Ductile-to-brittle transition for the aluminum alloy contacting to liquid gallium metal. J Alloys Compd. 2008;464:146–149. doi:https://doi.org/10.1016/j.jallcom.2007.09.115.
- Rettenmayr M, Lambracht P, Kempf B, et al. Zn-Al based alloys as Pb-free solders for die attach. J Electron Mater. 2002;31:278–285. doi:https://doi.org/10.1007/s11664-002-0144-1.
- Regan M, Tostmann H, Pershan P, et al. X-ray study of the oxidation of liquid-gallium surfaces. Phys Rev B-Condens Matter Mater Phys. 1997;55:10786–10790. doi:https://doi.org/10.1103/PhysRevB.55.10786.
- Plech A, Klemradt U, Metzger H, et al. In situ x-ray reflectivity study of the oxidation kinetics of liquid gallium and the liquid alloy Ga0.93Hg0.07. J Phys Condens Matter. 1998;10:971–982. doi:https://doi.org/10.1088/0953-8984/10/5/007.
- Flamini DO, Saidman SB, Bessone JB. Aluminium activation produced by gallium. Corros Sci. 2006;48:1413–1425. doi:https://doi.org/10.1016/j.corsci.2005.05.014.