Influence of prestress grinding hardening residual stress on rolling contact fatigue

References

• Qu S, Yao P, Gong Y, et al. Modelling and grinding characteristics of unidirectional C–SiCs. Ceram Int. 2022;48:8314–8324.
   Web of Science ®Google Scholar
• Li C, Wu Y, Li X, et al. Deformation characteristics and surface generation modelling of crack-free grinding of GGG single crystals. J Mater Process Technol. 2020;279:116577.
   Web of Science ®Google Scholar
• Sun C, Xiu S, Li Q, et al. Mechanism of surface creation for dynamic and static feature end grinding of associated systems. Surf Technol. 2021;50(12):35–43.
   Google Scholar
• Wang W, Liu H, Zhu C, et al. Effects of microstructure on rolling contact fatigue of a wind turbine gear based on crystal plasticity modeling. Int J Fatigue. 2019;120:73–86.
   Web of Science ®Google Scholar
• Zhong-Yu P, Bin-Shi X, Hai-Dou W, et al. Rolling contact fatigue behavior of thermal-sprayed coating: a review. Crit Rev Solid State Mater Sci. 2020;45(6):429–456.
   Web of Science ®Google Scholar
• Sun C, Hong Y, Xiu S, et al. Investigation on the influence of dynamic characteristic on grinding residual stress. Int J Adv Manuf. 2021;115:1853–1875.
   Web of Science ®Google Scholar
• Sun C, Xiu S, Hong Y, et al. Prediction on residual stress with mechanical-thermal and transformation coupled in DGH. Int J Mech Sci. 2020;179:105629.
   Web of Science ®Google Scholar
• Hönnige JR, Colegrove PA, Ahmad B, et al. Residual stress and texture control in Ti-6Al-4V wire-+-arc additively manufactured intersections by stress relief and rolling. Mater Des; 150:193–205.
   Web of Science ®Google Scholar
• Williams RJ, Vecchiato F, Kelleher J, et al. Effects of heat treatment on residual stresses in the laser powder bed fusion of 316L stainless steel: finite element predictions and neutron diffraction measurements. J Manuf Process. 2020;57:641–653.
   Web of Science ®Google Scholar
• Li J, Du A, Fan Y, et al. Effect of shot-blasting pretreatment on microstructures of hot-dip galvanized coating. Surf Coat Technol. 2019;364:218–224.
   Web of Science ®Google Scholar
• Nguyen T, Zhang LC. Grinding–hardening using dry air and liquid nitrogen: prediction and verification of temperature fields and hardened layer thickness. Int J Mach Tools Manuf. 2010;50(10):901–910.
   Web of Science ®Google Scholar
• Lin Y-C, Hung J-C, Lee H-M, et al. Machining characteristics of a hybrid process of EDM in gas combined with ultrasonic vibration. Int J Adv Manuf Techn. 2017;92(5):2801–2808.
   Web of Science ®Google Scholar
• Wang X, Shen X, Zeng C, et al. Combined influences of tool shape and as-deposited diamond film on cutting performance of drills for CFRP machining. Surf Coat Technol. 2018;347:390–397.
   Web of Science ®Google Scholar
• Deng Y, Xiu S, Shi X, et al. Study on the effect mechanisms of pre-stress on residual stress and surface roughness in PSHG. Int J Adv Manuf Technol. 2017;88(9):3243–3256.
   Web of Science ®Google Scholar
• Kammerhofer C, Hohenwarter A, Pippan R. A novel laboratory test rig for probing the sensitivity of rail steels to RCF and wear – first experimental results. Wear. 2014;316(1):101–108.
   Web of Science ®Google Scholar
• Liu C-P, Liu P-T, Pan J-Z, et al. Effect of pre-wear on the rolling contact fatigue property of D2 wheel steel. Wear. 2020;442–443:203154.
   Web of Science ®Google Scholar
• Huang YB, Shi LB, Zhao XJ, et al. On the formation and damage mechanism of rolling contact fatigue surface cracks of wheel/rail under the dry condition. Wear. 2018;400–401:62–73.
   Web of Science ®Google Scholar
• Nejad RM. Using three-dimensional finite element analysis for simulation of residual stresses in railway wheels. Eng Fail Anal. 2014;45:449–455.
   Web of Science ®Google Scholar
• Glodež S, Ren Z. Modelling of crack growth under cyclic contact loading. Theor Appl Fract Mech. 1998;30(2):159–173.
   Web of Science ®Google Scholar
• Ooi GTC, Roy S, Sundararajan S. Investigating the effect of retained austenite and residual stress on rolling contact fatigue of carburized steel with XFEM and experimental approaches. Mater Sci Eng A. 2018;732:311–319.
   Web of Science ®Google Scholar
• Wang W, Liu H, Zhu C, et al. Effect of the residual stress on contact fatigue of a wind turbine carburized gear with multiaxial fatigue criteria. Int J Mech Sci. 2019;151:263–273.
   Web of Science ®Google Scholar
• Li F, Hu W, Meng Q, et al. A new damage-mechanics-based model for rolling contact fatigue analysis of cylindrical roller bearing. Tribol Int. 2018;120:105–114.
   Web of Science ®Google Scholar
• Kang B, Ma H, Li J, et al. Effect of grinding parameters on surface quality, microstructure and rolling contact fatigue behaviors of gear steel for vacuum pump. Vacuum. 2020;180:109637.
   Web of Science ®Google Scholar
• Zhang W, Fang K, Hu Y, et al. Effect of machining-induced surface residual stress on initiation of stress corrosion cracking in 316 austenitic stainless steel. Corros Sci. 2016;108:173–184.
   Web of Science ®Google Scholar
• Ringsberg JW. Life prediction of rolling contact fatigue crack initiation. Int J Fatigue. 2001;23(7):575–586.
   Web of Science ®Google Scholar
• Lu C, Martínez-Esnaola JM. Multiaxial fatigue space: a three-dimensional space constituted of fatigue basic units. Int J Fatigue. 2021;143:105995.
   Web of Science ®Google Scholar
• Šraml M, Flašker J, Potrč I. Numerical procedure for predicting the rolling contact fatigue crack initiation. Int J Fatigue. 2003;25(7):585–595.
   Web of Science ®Google Scholar
• Zhang X, Liu Z, Liu L. Critical conditions of residual stresses to optimize fatigue life of rolling bearings in superfinish hard turning. Tool Eng. 2004;38(5):19–21.
   Google Scholar
• Webster GA, Ezeilo AN. Residual stress distributions and their influence on fatigue lifetimes. Int J Fatigue. 2001;23:375–383.
   Web of Science ®Google Scholar
• Hajshirmohammadi B, Khonsari MM. On the entropy of fatigue crack propagation. Int J Fatigue. 2020;133:105413.
   Web of Science ®Google Scholar