Highly textured TiN ceramic prepared by edge-free spark plasma sintering

References

• Stone DS, Yoder KB, Sproul WD. Hardness and elastic modulus of TiN based on continuous indentation technique and new correlation. J Vac Sci Technol A. 1991;9:2543–2547.
   Web of Science ®Google Scholar
• Yang K, Jiang JQ, Gu MY. Effects of nitrogen partial pressure on microstructure, morphology and N/Ti ratio of TiN films deposited by reactive magnetron sputtering. Mater Sci Technol. 2007;23(8):958–962.
   Web of Science ®Google Scholar
• Abadias G. Stress and preferred orientation in nitride-based PVD coatings. Surf Coat Tech. 2008;202:2223–2235.
   Web of Science ®Google Scholar
• Moriyama M, Kamata K, Kobayashi Y. Mechanical and electrical properties of hot-pressed TiN ceramics with additives. (in Japanese). J Ceram Soc Jpn. 1991;99:286–291.
   Web of Science ®Google Scholar
• Kawano S, Takahashi J, Shimada S. Spark plasma sintering of nano-sized TiN prepared from TiO2 by controlled hydrolysis of TiCl4 and Ti(O-i-C3H7)4 solution. J Am Ceram Soc. 2010;86:1609–1611.
   Web of Science ®Google Scholar
• Andrievski RA. Physical-mechanical properties of nanostructured titanium nitride. Nanostruct Mater. 1997;9:607–610.
   Google Scholar
• Zimmerman MH, Baskin DM, Faber KT, et al. Fracture of a textured anisotropic ceramic. Acta Mater. 2001;49:3231–3242.
   Web of Science ®Google Scholar
• Zhang Y, Zhang J, Lu Q. Rapid synthesis of Ca2Co2O5 textured ceramics by coprecipitation method and spark plasma sintering. J Alloy Compd. 2005;399:64–68.
   Web of Science ®Google Scholar
• Zhang Z, Duan X, Qiu B, et al. Preparation and anisotropic properties of textured structural ceramics: a review. J Adv Ceram. 2019;8:289–332.
   Web of Science ®Google Scholar
• Zhang X, Xie W, Sun L, et al. Continuous SiC skeleton reinforced highly oriented graphite flake composites with high strength and specific thermal conductivity. J Adv Ceram. 2022;11:403–413.
   Web of Science ®Google Scholar
• Ljungcrantz H, Odén M, Hultman L, et al. Nanoindentation studies of single-crystal (001), (011), and (111) oriented TiN layers on MgO. J Appl Phys. 1996;80:6725–6733.
   Web of Science ®Google Scholar
• Gong YS, Tu R, Goto T. Microstructure and preferred orientation of titanium nitride films prepared by laser CVD. Mater Trans. 2009;50:2028–2034.
   Web of Science ®Google Scholar
• Tang SY, Gao S, Wang SX, et al. Characterization of CVD TiN coating at different deposition temperatures and its application in hydrocarbon pyrolysis. Surf Coat Tech. 2014;258:1060–1067.
   Web of Science ®Google Scholar
• Liang HL, Xu J, Zhou DY, et al. Thickness dependent microstructural and electrical properties of TiN thin films prepared by DC reactive magnetron sputtering. Ceram Int. 2016;42:2642–2647.
   Web of Science ®Google Scholar
• Kobayashi M, Doi Y. TiN and TiC coating on cemented carbides by ion plating. Thin Solid Films. 1978;54:67–74.
   Web of Science ®Google Scholar
• Liu W, Qiu C, Zhou J, et al. Fabrication of Ti2AlN ceramics with orientation growth behavior by the microwave sintering method. J Eur Ceram Soc. 2015;35:1385–1391.
   Web of Science ®Google Scholar
• Liu Y, Li YX, Li F, et al. Highly textured Ti2AlN ceramic prepared via thermal explosion followed by edge-free spark plasma sintering. Scr Mater. 2017;136:55–58.
   Web of Science ®Google Scholar
• Pang WK, Low IM, Kennedy SJ, et al. In situ diffraction study on decomposition of Ti2AlN at 1500–1800°C in vacuum. Mat Sci Eng A. 2010;528:137–142.
   Web of Science ®Google Scholar
• Low IM, Pang WK, Kennedy SJ, et al. High-temperature thermal stability of Ti2AlN and Ti4AlN3: a comparative diffraction study. J Eur Ceram Soc. 2011;31:159–166.
   Web of Science ®Google Scholar
• Green DJ. An introduction to the mechanical properties of ceramics. Cambridge: Cambridge University Press; 1998.
   Google Scholar
• Tanaka K, Kitahara Y, Ichinose Y, et al. Fracture analysis of single crystal manganese zinc ferrites using indentation flaws. Acta Metall. 1984;32:1719–1729.
   Google Scholar
• https://mmrc.caltech.edu/PVD/manuals/Metals%20Vapor%20pressure.pdf#opennewwindow.
   Google Scholar
• Suarez-Vazquez S, Nanko M. Preparation of dense TiN1-x (X = 0–0.4) by pulsed electric current sintering: densification and mechanical behavior. Int J Ref Metal Hard Mater. 2014;44:54–59.
   Web of Science ®Google Scholar
• Naguib M, Mochalin VN, Barsoum MW, et al. 25th anniversary article: MXenes: a new family of two-dimensional materials. Adv Mater. 2014;26:992–1005.
   PubMed Web of Science ®Google Scholar
• Shein IR, Ivanovskii AL. Graphene-like titanium carbides and nitrides Tin+1Cn, Tin+1Nn (n = 1, 2, and 3) from de-intercalated MAX phases: first-principles probing of their structural, electronic properties and relative stability. Comp Mater Sci. 2012;65:104–114.
   Web of Science ®Google Scholar
• Lin ZJ, Zhuo MJ, Li MS, et al. Synthesis and microstructure of layered-ternary Ti2AlN ceramic. Scr Mater. 2007;56:1115–1118.
   Web of Science ®Google Scholar
• Wang XH, Zhou YC. Layered machinable and electrically conductive Ti2AlC and Ti3AlC2 ceramics:a review. J Mater Sci Technol. 2010;26:385–416.
   Web of Science ®Google Scholar
• Emmerlich J, Music D, Eklund P, et al. Thermal stability of Ti3SiC2 thin films. Acta Mater. 2007;55:1479–1488.
   Web of Science ®Google Scholar
• Chen ZS, Li HJ, Fu QG, et al. Annealing effect on microstructure and mechanical properties of magnetron sputtering Ti–Si–C thin film. Mater Sci Technol. 2013;29(8):975–979.
   Web of Science ®Google Scholar
• Zhang J, Wang JY, Zhou YC. Structure stability of Ti3AlC2 in Cu and microstructure evolution of Cu-Ti3AlC2 composites. Acta Mater. 2007;55:4381–4390.
   Web of Science ®Google Scholar
• Liu Y, Jin Z. Electric current assisted sintering of continuous functionally graded Ti2AlN/TiN material. Ceram Int. 2012;38:217–222.
   Web of Science ®Google Scholar
• Will FG, deLorenzi HG, Janora KH. Effect of crystal orientation on conductivity and electron mobility in single-crystal alumina. J Am Ceram Soc. 1992;75(10):2790–2794.
   Web of Science ®Google Scholar