Effects of anisotropy and pre-strain on the shear fatigue behaviour of DP600 steel

References

• Wang PY, Garlock MEM, Zoli TP, et al. Low-frequency sinusoids for enhanced shear buckling performance of thin plates. J Constr Steel Res. 2021;177:106475.
   Web of Science ®Google Scholar
• Su Y, Guan Z, Wang X, et al. Buckling and post-buckling behavior of titanium alloy stiffened panels under shear load. Chin J Aeronaut. 2019;32(3):619–626.
   Web of Science ®Google Scholar
• Liu W, Sun G, Chen L, et al. Experimental investigation into NiTi shape memory alloy panels under cyclic shear loading. Eng Struct. 2021;245:112958.
   Web of Science ®Google Scholar
• Roberts TM, Davies AW. Fatigue induced by plate breathing. J Constr Steel Res. 2002;58(12):1495–1508.
   Web of Science ®Google Scholar
• Alinia MM, Hosseinzadeh SAA, Habashi HR. Influence of central cracks on buckling and post-buckling behaviour of shear panels. Thin-Walled Struct. 2007;45(4):422–431.
   Web of Science ®Google Scholar
• Wang ZY, Zhang T, Chen Y, et al. Fatigue behaviour of slender corrugated webs subjected to plate breathing. Int J Fatigue. 2019;122:46–60.
   Web of Science ®Google Scholar
• Peng Y, Ye M, Sun W, et al. Buckling fatigue behavior of 2A97 Al-Li alloy stiffened panels under shear loading. Eng Fail Anal. 2021;128:105575.
   Web of Science ®Google Scholar
• Wang B, Chen X, Sun X, et al. Interaction formulae for buckling and failure of orthotropic plates under combined axial compression/tension and shear. Chin J Aeronaut. 2022;35(3):272–280.
   Web of Science ®Google Scholar
• A W TMR, Davies RJ, Bennett H. Fatigue shear strength of slender web plates. J Struct Eng. 1995;121(10):1396–1401.
   Web of Science ®Google Scholar
• Guo L, Liao F, Xu Y, et al. Experimental method and failure mechanisms investigation for out-of-plane shear fatigue behavior of 3D woven composites. Int J Fatigue. 2020;134:1–9.
   Web of Science ®Google Scholar
• Das B, Singh A, Paul SK, et al. Correlation between fatigue response of preformed bend DP600 steel specimen and wheel disc. Fatigue Fract Eng Mater Struct. 2020;43(12):2842–2853.
   Web of Science ®Google Scholar
• Das B, Singh A, Kumar Paul S. Low cycle fatigue performance of DP600 steel under various pre-straining paths. Int J Fatigue. 2020;132:105331.
   Web of Science ®Google Scholar
• Jin X, Ji S, Liu C, et al. Comparison of low cycle fatigue behavior of 304 stainless steels induced by tensile and torsional prestrain. Fatigue Fract Eng Mater Struct. 2020;43(10):2247–2258.
   Web of Science ®Google Scholar
• Das B, Singh A, Arora KS, et al. Influence of pre-straining path on high cycle fatigue performance of DP 600 steel. Int J Fatigue. 2019;126:369–380.
   Web of Science ®Google Scholar
• Liao J, Sousa JA, Lopes AB, et al. Mechanical, microstructural behaviour and modelling of dual phase steels under complex deformation paths. Int J Plast. 2017;93:269–290.
   Web of Science ®Google Scholar
• Tuo Z, Yue Z, Zhuang X, et al. Comparison of two uncoupled ductile damage initiation models applied to DP900 steel sheet under various loading paths. Int J Damage Mech. 2021;30(1):25–45.
   Web of Science ®Google Scholar
• Branco R, Costa JD, Borrego LP, et al. Effect of strain ratio on cyclic deformation behaviour of 7050-T6 aluminium alloy. Int J Fatigue. 2019;129:105234.
   Web of Science ®Google Scholar
• Ghosal P, Raj A, Paul SK. Influence of uniaxial and biaxial pre-straining on the low cycle fatigue performance of DP590 steel. Int J Fatigue. 2021;149:106260.
   Web of Science ®Google Scholar
• Gustavsson A, Melander A. Variable-amplitude fatigue of a dual-phase sheet steel subjected to prestrain. Int J Fatigue. 1994;16(7):503–509.
   Web of Science ®Google Scholar
• Paul SK, Sivaprasad S, Dhar S, et al. Cyclic plastic deformation and cyclic hardening/softening behavior in 304LN stainless steel. Theor Appl Fract Mech. 2010;54(1):63–70.
   Web of Science ®Google Scholar
• Le Q, Kang H, Kridli G, et al. Effect of prestrain paths on mechanical behavior of dual phase sheet steel. Int J Fatigue. 2009;31(4):607–615.
   Web of Science ®Google Scholar
• Yin Q, Soyarslan C, Güner A, et al. A cyclic twin bridge shear test for the identification of kinematic hardening parameters. Int J Mech Sci. 2012;59(1):31–43.
   Web of Science ®Google Scholar
• Yu HY, Shen JY. Evolution of mechanical properties for a dual-phase steel subjected to different loading paths. Mater Des. 2014;63:412–418.
   Web of Science ®Google Scholar
• Ghosal P, Paul SK, Das B, et al. Notch fatigue performance of DP600 steel under different pre-straining paths. Theor Appl Fract Mech. 2020;108:102630.
   Web of Science ®Google Scholar
• Flores P, Tuninetti V, Gilles G, et al. Accurate stress computation in plane strain tensile tests for sheet metal using experimental data. J Mater Process Technol. 2010;210(13):1772–1779.
   Web of Science ®Google Scholar
• Hilditch TB, Timokhina IB, Robertson LT, et al. Cyclic deformation of advanced high-strength steels: mechanical behavior and microstructural analysis. Metall Mater Trans A. 2009;40(2):342–353.
   Web of Science ®Google Scholar
• Paul SK, Stanford N, Hilditch T. Effect of martensite volume fraction on low cycle fatigue behaviour of dual phase steels: experimental and microstructural investigation. Mater Sci Eng A. 2015;638:296–304.
   Web of Science ®Google Scholar
• Paul SK, Sivaprasad S, Dhar S, et al. Key issues in cyclic plastic deformation: experimentation. Mech Mater. 2011;43(11):705–720.
   Web of Science ®Google Scholar
• Branco R, Costa JD, Berto F, et al. Fatigue life assessment of notched round bars under multiaxial loading based on the total strain energy density approach. Theor Appl Fract Mech. 2018;97:340–348.
   Web of Science ®Google Scholar
• Lambers HG, Rüsing CJ, Niendorf T, et al. On the low-cycle fatigue response of pre-strained austenitic Fe61Mn24Ni6.5Cr8.5 alloy showing TWIP effect. Int J Fatigue. 2012;40:51–60.
   Web of Science ®Google Scholar
• Ghosal P, Kumar Paul S, Raj A. Influence of uniaxial and biaxial pre-straining on the notch fatigue performance of DP590 steel. Theor Appl Fract Mech. 2021;115:103072.
   Web of Science ®Google Scholar
• Dey R, Tarafder S, Sivaprasad S. Influence of proportional and non-proportional loading on deformation behaviour of austenitic stainless steel-macro and micro analysis. Theor Appl Fract Mech. 2019;100:342–353.
   Web of Science ®Google Scholar
• Brewer LN, Othon MA, Young LM, et al. Misorientation mapping for visualization of plastic deformation via electron back-scattered diffraction. Microsc Microanal. 2006;12(1):85–91.
   PubMed Web of Science ®Google Scholar
• Paul SK. Effect of martensite volume fraction on stress triaxiality and deformation behavior of dual phase steel. Mater Des. 2013;50:782–789.
   Web of Science ®Google Scholar
• Tsipouridis P, Koll L, Krempaszky C, et al. On the strength of grain and phase boundaries in ferritic-martensitic dual-phase steels. Int J Mater Res. 2011;102(6):674–686.
   Web of Science ®Google Scholar
• Archie F, Li X, Zaefferer S. Micro-damage initiation in ferrite-martensite DP microstructures: A statistical characterization of crystallographic and chemical parameters. Mater Sci Eng A. 2017;701:302–313.
   Web of Science ®Google Scholar