121
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Characteristics of advanced high-strength steels obtained by the compact strip production route

, , , , & ORCID Icon
Pages 327-337 | Received 02 Feb 2022, Accepted 03 Aug 2022, Published online: 22 Aug 2022

References

  • Miller JD, Façanha C. The state of clean transport policy. A 2014 synthesis of vehicle and fuel policy developments. New York: International Council on Clean Transportation; 2014; Available from: www.theicct.org/state-of-clean-transport-policy-2014
  • Meszler D, Delgado O, Rodríguez F, et al. European heavy-duty vehicles: cost-effectiveness of fuel efficiency technologies for long-haul tractor-trailers in the 2025-2030 timeframe. Copenhagen: European Environment Agency, Analysis of key trends and drivers in greenhouse gas emissions in the EU between 1990 and 2014, 2016; Available from: www.eea.europa.eu/publications/analysis-of-key-trends-ghg
  • Petrov RH, Sidor J, Kestens LAI. Advanced high-strength steels: microstructure and texture evolution. In: R Colás, GE Totten, editors. Encyclopedia of iron, steel and their alloys. Boca Raton (FL): CRC Press; 2016. p. 70–99.
  • Lesch C, Kwiaton N, Klose FB. Advanced high strength steels (AHSS) for automotive applications − tailored properties by smart microstructural adjustments. Steel Res Int. 2017;88:1700210.
  • Ludwig A, Wu M, Kharicha A. On macrosegregation. Metall Mat Trans A. 2015;46:4854–4867.
  • Thomas BG. Review on modeling and simulation of continuous casting. Steel Res Int. 2018;89:1700312.
  • Sun X, Choi KS, Soulami A, et al. On key factors influencing ductile fractures of dual phase (DP) steels. Mater Sci Eng A. 2009;526:140–149.
  • Bhattacharya D, Roy TK, Mahashabde VV. A study to establish correlation between intercolumnar cracks in slabs and off-center defects in hot-rolled products. J Fail Anal Preven. 2016;16:95–103.
  • Lee H, Jo MC, Sohn SS, et al. Novel medium-Mn (austenite + martensite) duplex hot-rolled steel achieving 1.6 GPa strength with 20% ductility by Mn-segregation-induced TRIP mechanism. Acta Mater. 2018;147:247–260.
  • Guo F, Wang X, Liu W, et al. The influence of centerline segregation on the mechanical performance and microstructure of X70 pipeline steel. Steel Res Int. 2018;89:1800407.
  • Guo F, Liu W, Wang X, et al. Controlling variability in mechanical properties of plates by reducing centerline segregation to meet strain-based design of pipeline steel. Metals (Basel). 2019;9:749.
  • Reip CP, Shanmugam S, Misra RDK. High strength microalloyed CMn(V–Nb–Ti) and CMn(V–Nb) pipeline steels processed through CSP thin-slab technology: microstructure, precipitation and mechanical properties. Mater Sci Eng A. 2006;424:307–317.
  • Ramírez-Ramírez JH, Pérez-González FA, Zapata-Hernández OJ, et al. Failure analysis of an advanced high-strength steel. Eng Fail Anal. 2022;131:105893.
  • Zare MH, Meysami AH, Mahmoudi S, et al. Simulation of fluid flow and solidification in the funnel type crystalizer of thin slab continuous cast. Orient J Chem. 2013;29:1325–1337.
  • Klinkenberg C, Kintscher B, Hoen K, et al. More than 25 years of experience in thin slab casting and rolling current state of the art and future developments. Steel Res Int. 2017;88:1700272.
  • Zambrano PC, Delgado AL, Guerrero-Mata MP, et al. Hot rolling of light gauge steel strip. ISIJ Int. 2003;43:1030–1035.
  • Hernández L, Guerrero-Mata MP, Leduc LA, et al. A model for the run out table cooling in a compact rolling mill. J Phys IV. 2004;120:513–518.
  • Ramírez-Cuéllar J, Leduc-Lezama LA, Colás R. Mechanisms of formation and removal of the primary oxide in a tunnel furnace by the descaling on a compact plant for flat products. ISIJ Int. 2011;51:409–415.
  • ASTM E8/E8M-21. Standard test methods for tension testing of metallic materials. West Conshohocken (PA): ASTM Int.; 2021; Available from: www.astm.org
  • Saunders N, Guo Z, Li X, et al. Using JMatPro to model materials properties and behavior. JOM. 2003;55(12):60–65.
  • Colás R. Modelling heat transfer during hot rolling of steel strip. Modelling Simul Mater Sci Eng. 1995;3:437–453.
  • Colás R. Mathematical modelling of hot rolling steel strip. Mater Sci Tech. 1998;14:388–393.
  • El-Dasher B, Deal A. Application of electron backscatter diffraction to phase identification. In: AJ Schwartz, M Kumar, BL Adams, et al, editors. Electron backscatter difraction in materials science. Springer-Verlag, New York; 2009.
  • Okamoto H. The C-Fe (carbon-iron) system. J. Phase Equil. 1992;13:543–565.
  • Azisi G, Thomas BG, Zaeem MA. Review of peritectic solidification mechanisms and effects in steel casting. Metall Mat Trans B. 2020;51:1875–1903.
  • Sverdlin A. Carbon-iron alloys: austenite transformation and heat treatment processing. In: R Colás, GE Totten, editors. Encyclopedia of iron, steel and their Alloys. Boca Raton (FL): CRC Press; 2016. p. 517–549.
  • Bai M, Liu D, Lou Y, et al. Effects of Ti addition on low carbon hot strips produced by CSP process. J Univ Sc Techn Beijing Min Met Mat. 2006;13:230–234.
  • Hollomon JH. Tensile deformation. Trans AIME. 1945;162:268–290.
  • Voce E. The relationship between stress and strain for homogeneous deformation. J Inst Met. 1948;74:537–562.
  • Pickering FB. Physical metallurgy and the design of steel. London: Applied Sc. Pub.1978.
  • Leslie WC. The physical metallurgy of steels. Tokyo: McGraw-Hill International Book Co.; 1982.
  • Considère A. Mémoire sur l’emploi du fer et de l’acier dans les constructions. Ann Ponts Chaus. 1885;9:574–775.
  • Turkdogan ET. Causes and effects of nitride and carbonitride precipitation during continuous casting. Iron Steelmaker. 1989;16:61–75.
  • Kunze J. Nitrogen and carbon in iron and steel – thermodynamics. Berlin: Akademie Verlag; 1991.
  • Cui K-Y, Ye X-Y, Li Z-R, et al. Investigation of cold forming cracking defect of high-strength vehicle structural steel. Adv Eng Res. 2017;110:337–342.
  • Capurro C, Cicutti C. Analysis of titanium nitrides precipitated during medium carbon steels solidification. J Mat Res Technol. 2018;7:342–349.
  • Pérez-González FA, Camurri CG, Carrasco CA, et al. Precipitation in a lead calcium tin anode. Mater Charact. 2012;64:62–68.
  • Mecking H, Kocks UF. Kinetics of flow and strain-hardening. Acta Metal. 1981;29:1865–1875.
  • Estrin Y, Mecking H. A unified phenomenological description of work hardening and creep based on one-parameter models. Acta Metal. 1984;32:57–70.
  • Colás R. Determination of the onset of microstructural changes occurring during mechanical testing. Scripta Met. 1985;19:155–157.
  • Airod A, Petrov R, Colás R, et al. Analysis of the trip effect by means of axisymmetric compressive tests on a Si-Mn bearing steel. ISIJ Int. 2004;44:179–186.
  • Choudhary BK, Palaparti DPR, Samuel EI. Analysis of tensile stress-strain and work-hardening behavior in 9Cr-1Mo ferritic steel. Metal Mater Trans A. 2013;44:212–223.
  • Salinas A, Celentano D, Carvajal L, et al. Microstructure-based constitutive modelling of low-alloy multiphase TRIP steels. Metals (Basel). 2019;9:250.
  • Bowen AW, Partridge PG. Limitations of the Hollomon strain-hardening equation. J Phys D Appl Phys. 1974;7:969–978.
  • Ghatei Kalashamia A, Kermanpur A, Ghassemali E, et al. Correlation of microstructure and strain hardening behavior in the ultrafine-grained Nb-bearing dual phase steels. Mat Sc Eng A. 2016;678:215–226.
  • Béres G, Weltsch Z, Lukács Z, et al. Prediction of stress- and strain-based forming limits of automotive thin sheets by numerical, theoretical and experimental methods. AIP Conf Proc. 2018;1960:160002.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.