Copper plating on bonding properties of aluminium/steel explosive welded composite plate

References

• Zhang H, Jiao KX, Zhang JL, et al. Comparisons of the microstructures and micro-mechanical properties of copper/steel explosive-bonded wave interfaces. Mater Sci Eng A. 2019;756:430–441.
   Web of Science ®Google Scholar
• Yang M, Ma HH, Shen ZW, et al. Dissimilar material welding of tantalum foil and Q235 steel plate using improved explosive welding technique. Mater Des. 2020;186:108348.
   Web of Science ®Google Scholar
• Zahedi A, Dariani BM, Mirnia MJ. Experimental determination and numerical prediction of necking and fracture forming limit curves of laminated Al/Cu sheets using a damage plasticity model. Int J Mech Sci. 2019;153–154:341–358.
   Web of Science ®Google Scholar
• Liang HL, Luo N, Shen T, et al. Experimental and numerical simulation study of Zr-based BMG/Al composites manufactured by underwater explosive welding. J Mater Res Technol. 2020;9:1539–1548.
   Google Scholar
• Boroński D, Skibicki A, Maćkowiak P, et al. Modeling and analysis of thin-walled Al/steel explosion welded transition joints for shipbuilding applications. Mar Struct. 2020;74:102843.
   Web of Science ®Google Scholar
• Zeng XY, Wang YX, Li XQ, et al. Effect of inert gas-shielding on the interface and mechanical properties of Mg/Al explosive welding composite plate. J Manuf Process. 2019;45:166–175.
   Web of Science ®Google Scholar
• Liang HL, Ning L, Li XJ, et al. Joining of Zr60Ti17Cu12Ni11 bulk metallic glass and aluminum 1060 by underwater explosive welding method. J Manuf Process. 2019;45:115–122.
   Web of Science ®Google Scholar
• Yang M, Xu JF, Ma HH, et al. Microstructure development during explosive welding of metal foil: morphologies, mechanical behaviors and mechanisms. Composites Part B. 2021;212:108685.
   Web of Science ®Google Scholar
• Yang M, Ma HH, Shen ZW, et al. Microstructure and mechanical properties of Al−Fe meshing bonding interfaces manufactured by explosive welding. Trans Nonferrous Met Soc China. 2019;29:680–691.
   Web of Science ®Google Scholar
• Zhou GA, Xu JF, Shen ZW, et al. Microstructure and mechanical properties of simultaneously explosively-welded steel/Cu pipes and Al/Cu pipe/rod. J Manuf Process. 2019;47:244–253.
   Web of Science ®Google Scholar
• Parchuri P, Kotegawa S, Yamamoto H, et al. Benefits of intermediate-layer formation at the interface of Nb/Cu and Ta/ Cu explosive clads. Mater Des. 2019;166:107610.
   Web of Science ®Google Scholar
• Liu KY, Chen PW, Chun R, et al. Investigation on the interfacial microstructure and mechanical properties of the W-Cu joints fabricated by hot explosive welding. J Mater Process Technol. 2022;300:117400.
   Web of Science ®Google Scholar
• Paul H, Chulist R, Bobrowski P, et al. Microstructure and properties of the interfacial region in explosively welded and post-annealed titanium-copper sheets. Mater Charact. 2020;167:110520.
   Web of Science ®Google Scholar
• Paul H, Skuza W, Chulist R, et al. The effect of interface morphology on the electro-mechanical properties of Ti/Cu clad composites produced by explosive welding. Metall Mater Trans A. 2020;51A:750–766.
   Google Scholar
• Bi XZ, Li XJ, Yang K, et al. Experimental and numerical studies of titanium foil/steel explosively welded clad plate. Def Technol. 2022; doi:10.1016/j.dt.2022.05.001.
   Google Scholar
• Carvalho GHSFL, Galvão I, Mendes R, et al. Explosive welding of aluminium to stainless steel using carbon steel and niobium interlayers. J Mater Process Technol. 2020;283:116707.
   Web of Science ®Google Scholar
• Paul H, Chulist R, Lityńska-Dobrzyńska L, et al. Interfacial reactions and microstructure related properties of explosively welded tantalum and steel sheets with copper interlayer. Mater Des. 2021;208:109873.
   Web of Science ®Google Scholar
• Chen X, Inao D, Tanaka S, et al. Explosive welding of Al alloys and high strength duplex stainless steel by controlling energetic conditions. J Manuf Process. 2020;58:1318–1333.
   Web of Science ®Google Scholar
• Kwaśniak P, Garbacz H. Ab initio study of the influence of alloying elements on stability and mechanical properties of selected tixaly intermetallic compounds and their TixAly/Al, TixAly/Ti interfaces in explosively welded metal–metal composites. Metall Mater Trans A. 2021;52A:5032–5042.
   Google Scholar
• Zhang TT, Wang WX, Yan ZF, et al. Interfacial morphology and bonding mechanism of explosive weld joints. Chin J Mech Eng. 2021;34:8.
   Web of Science ®Google Scholar
• Roostaei M, Darabi R. Investigation on formability of three-layer joined Al/Cu/Al sheets annealed at different temperature. Mater Sci Technol. 2020;36:1476–1486.
   Web of Science ®Google Scholar
• Wu Z, Zong L, Sun L. A mie- Grüneisen mixture Eulerian model for underwater explosion. Eng Computation. 2014;31:425–452.
   Web of Science ®Google Scholar
• Abdulazeem MS. Shock and detonation properties of solid explosives with gaseous products. Hazard Mater. 2010;177:372–376.
   PubMed Web of Science ®Google Scholar
• Zhang X, Luo B, Wu G, et al. Yield behavior of polystyrene at strain rate 106/s under quasi-isentropic compression. Mech Mater. 2018;124:1–6.
   Web of Science ®Google Scholar
• Yoh JJ, McClelland MA, Maienschein JL, et al. Test-based thermal explosion model for HMX. Proc Combust Inst. 2007;31:2353–2359.
   Web of Science ®Google Scholar
• Swift DC, Seifter A, Holtkamp DB, et al. Shock and release temperatures in molybdenum: experiment and theory. Phys Rev B. 2007;76:54122.
   Web of Science ®Google Scholar
• Mousavi SAAA, Riahi M, Parast AH. Experimental and numerical analyses of explosive free forming. J Mater Process Technol. 2007;187–188:512–516.
   Web of Science ®Google Scholar
• Rushton N, Schleyer GK, Clayton AM, et al. Internal explosive loading of steel pipes. Thin Wall Struct. 2008;46:870–877.
   Web of Science ®Google Scholar
• Walsh JM, Shreffler RG, Willig FJ. Limiting conditions for jet formation in high velocity collisions. J Appl Phys. 1953;24:349–359.
   Web of Science ®Google Scholar
• Yang M, Ma HH, Shen ZW. Study on the effects of explosive covering on explosive welding of stainless steel to steel. Propellants Explos Pyrotech. 2019;44:609–616.
   Web of Science ®Google Scholar
• Yang M, Ma HH, Shen ZW. Study on self-restrained explosive welding with high energy efficiency. Int J Adv Manuf Tech. 2018;99:3123–3132.
   Web of Science ®Google Scholar
• Deribas AA, Kudinov M, Fl M. Effect of the initial parameters on the process of wave formation in explosive welding. Combust Explos Shock Waves. 1967;3:344–348.
   Web of Science ®Google Scholar
• Zhou Q, Liu R, Zou Q, et al. Microstructure characterization and tensile shear failure mechanism of the bonding interface of explosively welded titanium-steel composite. Mater Sci Eng, A. 2021;820:141559.
   Web of Science ®Google Scholar
• Zhang T, Wang W, Zhou J, et al. Molecular dynamics simulations and experimental investigations of atomic diffusion behavior at bonding interface in an explosively welded Al/Mg alloy composite plate. Acta Metall Sin. 2017;30:983–991.
   Web of Science ®Google Scholar
• Paul H, Petrzak P, Chulist R, et al. Effect of impact loading and heat treatment on microstructure and properties of multi-layered AZ31/AA1050 plates fabricated by single-shot explosive welding. Mater Des. 2022;214:110411.
   Web of Science ®Google Scholar
• Fu YS, Luo KX, Zhao PL, et al. Dynamic behavior of Cu/Al-laminated metal with impedance mismatch. J Mater Eng Perform. 2022: 1–10.
   Web of Science ®Google Scholar
• Li HZ, Yang Y, Liang XP, et al. Effect of annealing temperature and time on the microstructure, mechanical properties and conductivity of cold-rolled explosive Cu/Al composite sheets. Mater Res Express. 2020;7:106502.
   Web of Science ®Google Scholar