Understanding solidification and wear behaviour of Al-3Cu-Bi alloys

References

• Wen F, Chen J, Zhong S, et al. Effect of crystal orientations and precipitates on the corrosion behavior of the Al-Cu alloy using single crystals. J Alloys Compd. 2022;890:161858.
   Web of Science ®Google Scholar
• Sun YS, Lorimer GW, Ridley N. Microstructure and its development in Cu-Al-Ni alloys. Metall Trans A. 1990;21:575–588.
   Web of Science ®Google Scholar
• Dorin T, Ramajayam M, Langan TJ. Impact of scandium and zirconium on extrudability, microstructure and hardness of a binary Al-Cu alloy. Mater Today Proc. 2019;10:242–247.
   Google Scholar
• Park JM, Mattern N, Kühn U, et al. High-strength bulk Al-based bimodal ultrafine eutectic composite with enhanced plasticity. J Mater Res. 2009;24:2605–2609.
   Web of Science ®Google Scholar
• Lichioiu I, Peter I, Varga B, et al. Preparation and structural characterization of rapidly solidified Al–Cu alloys. J Mater Sci Technol. 2014;30:394–400.
   Web of Science ®Google Scholar
• Li X, Yang X, Yi D, et al. Effects of NbC content on microstructural evolution and mechanical properties of laser cladded Fe50Mn30Co10Cr10-xNbC composite coatings. Intermetallics. 2021;138:107309.
   Web of Science ®Google Scholar
• Wu Y, Chen J, Zhang L, et al. Effect of boron on the structural stability, mechanical properties, and electronic structures of γ′-Ni3Al in TLP joints of nickel-based single-crystal alloys. Mater Today Commun. 2022;31:103375.
   Web of Science ®Google Scholar
• Cantor B, Assender H, Grant P. Aerospace materials. 1st ed. Philadelphia (PA): CRC Press; 2001.
   Google Scholar
• Kaldor S, Ber A, Lenz E. On the mechanism of chip breaking. J Eng Ind. 1979;101:241–249.
   Web of Science ®Google Scholar
• Wani AL, Ara A, Usmani JA. Lead toxicity: a review. Interdiscip Toxicol. 2015;8:55–64.
   PubMedGoogle Scholar
• Jin S, Kim M, Kanayama S, et al. in: 2017 IEEE 19th Electron. Packag Technol Conf, IEEE; 2017, p. 1–5.
   Google Scholar
• Smolej A, Breskvar B, Sokovic M, et al. Properties of aluminium free-cutting alloys with tin, Part I. 2002;78:284–288.
   Google Scholar
• Smolej A, Breskvar B, Sokovic M, et al. Properties of aluminium free-cutting alloys with tin, Part II. 2002;78:388–391.
   Google Scholar
• Cuffari B. AZoM; 2021.
   Google Scholar
• ALABI MM. Hypo-Eutectic Aluminum-Silicon Alloy Having Tin and Bismuth Additions, 5,122,208; n.d.
   Google Scholar
• Faltus J, Stulíková I, Hájek M, et al. Aluminium alloys on the basis of Al-Cu-Mg, lead-free, intended for cutting. Mater Sci Forum. 2002;396–402:1641–1646.
   Google Scholar
• Costa TA, Dias M, Silva C, et al. Measurement and interrelation of length scale of dendritic microstructures, tensile properties, and machinability of Al-9 wt% Si-(1 wt% Bi) alloys. Int J Adv Manuf Technol. 2019;105:1391–1410.
   Web of Science ®Google Scholar
• Dias M, Oliveira R, Kakitani R, et al. Effects of solidification thermal parameters and Bi doping on silicon size, morphology and mechanical properties of Al-15wt.% Si-3.2wt.% Bi and Al-18wt.% Si-3.2wt.% Bi alloys. J Mater Res Technol. 2020;9:3460–3470.
   Google Scholar
• Grugel RN, Lograsso TA, Hellawell A. The solidification of monotectic alloys—microstructures and phase spacings. Metall Mater Trans A. 1984;15:1003–1012.
   Web of Science ®Google Scholar
• Zhao JZ, He J, Hu ZQ, et al. Microstructure evolution in immiscible alloys during rapid directional solidification. Int J Mater Res. 2022;95:362–368.
   Google Scholar
• Ratke L, Müller A. On the destabilisation of fibrous growth in monotectic alloys. Scr Mater. 2006;54:1217–1220.
   Web of Science ®Google Scholar
• Ratke L. Theoretical considerations and experiments on microstructural stability regimes in monotectic alloys. Mater Sci Eng A. 2005;413–414:504–508.
   Web of Science ®Google Scholar
• Silva AP, Spinelli JE, Garcia A. Microstructural evolution during upward and downward transient directional solidification of hypomonotectic and monotectic Al–Bi alloys. J Alloys Compd. 2009;480:485–493.
   Web of Science ®Google Scholar
• Freitas ES, Silva AP, Spinelli JE, et al. Inter-relation of microstructural features and Dry sliding wear behavior of monotectic Al–Bi and Al–Pb alloys. Tribol Lett. 2014;55:111–120.
   Web of Science ®Google Scholar
• Reyes RV, Pinotti VE, Afonso CRM, et al. Processing, As-cast microstructure and wear characteristics of a monotectic Al-Bi-Cu alloy. J Mater Eng Perform. 2019;28:1201–1212.
   Web of Science ®Google Scholar
• Cruz KS, Meza ES, Fernandes FAP, et al. Dendritic Arm spacing affecting mechanical properties and wear behavior of Al-Sn and Al-Si alloys directionally solidified under unsteady-state conditions. Metall Mater Trans A. 2010;41:972–984.
   Web of Science ®Google Scholar
• Savaşkan T, Bican O. Dry sliding friction and wear properties of Al–25Zn–3Cu–3Si alloy. Tribol Int. 2010;43:1346–1352.
   Web of Science ®Google Scholar
• Dong YJ, Wang HM. Microstructure and dry sliding wear resistance of laser clad TiC reinforced Ti–Ni–Si intermetallic composite coating. Surf Coatings Technol. 2009;204:731–735.
   Web of Science ®Google Scholar
• Spinelli JE, Ferreira IL, Garcia A. Influence of melt convection on the columnar to equiaxed transition and microstructure of downward unsteady-state directionally solidified Sn–Pb alloys. J Alloys Compd. 2004;384:217–226.
   Web of Science ®Google Scholar
• Spinelli JE, Rosa DM, Ferreira IL, et al. Influence of melt convection on dendritic spacings of downward unsteady-state directionally solidified Al–Cu alloys. Mater Sci Eng A. 2004;383:271–282.
   Web of Science ®Google Scholar
• Silva AP, Spinelli JE, Garcia A. Thermal parameters and microstructure during transient directional solidification of a monotectic Al–Bi alloy. J Alloys Compd. 2009;475:347–351.
   Web of Science ®Google Scholar
• WebElements; 2022. Available in: https://www.webelements.com/. Access at: 09/07/2022.
   Google Scholar
• Wang T, Cao F, Chen Z, et al. Three dimensional microstructures and wear resistance of Al-Bi immiscible alloys with different grain refiners. Sci China Technol Sci. 2015;58:870–875.
   Web of Science ®Google Scholar
• Schouwenaars R, Jacobo VH, Ortiz A. Microstructural aspects of wear in soft tribological alloys. Wear. 2007;263:727–735.
   Web of Science ®Google Scholar