Effect of tempering temperature on the wear behaviour of martensitic ductile iron

References

• Ahmadabadi MN, Shamloo R. Control of austenitic transformation in ductile iron aided by calculation of Fe-C-Si-X phase boundaries. J Phase Equilib. 2001;22:194–198.
   Web of Science ®Google Scholar
• Zeng D, Zhang Y, Ning J, et al. Investigation on the scuffing resistance of nodular cast iron as affected by fine particle bombardment to produce surface hardened layer and micro-dimpled surface. Wear An Int J Sci Technol Friction Lubr Wear. 2017;378–379:174–182.
   Web of Science ®Google Scholar
• Ye Z, Zhang C, Wang Y, et al. An experimental investigation of piston skirt scuffing: a piston scuffing apparatus, experiments, and scuffing mechanism analyses. Wear. 2004;257:8–31.
   Web of Science ®Google Scholar
• Eymard S, Ignaszak Z, Mathia T, et al. Fundamentals of nodular cast iron scuffing at the boundary lubrication regime. Tribol Int. 2015;90:445–454.
   Web of Science ®Google Scholar
• Guo Z, Yuan C, Peng L, et al. Study on influence of cylinder liner surface texture on lubrication performance for cylinder liner–piston ring components. Tribol Lett. 2013;51:9–23.
   Web of Science ®Google Scholar
• Gagg CR, Lewis PR. Wear as a product failure mechanism – overview and case studies. Eng Fail Anal. 2007;14:1618–1640.
   Web of Science ®Google Scholar
• Sahin Y, Durak O. Abrasive wear behavior of austempered ductile iron. Mater Des. 2007;28:1844–1850.
   Web of Science ®Google Scholar
• Cao Y, Sun J, Ma F, et al. Effect of the microstructure and residual stress on tribological behavior of induction hardened GCr15 steel. Tribol Int. 2017;115:108–115.
   Web of Science ®Google Scholar
• Oksanen V, Andersson P, Valtonen K, et al. Characterization of the wear of nodular cast iron rollers in contact with wire ropes, wear: an International Journal on the Science and Technology of Friction. Lubr Wear. 2013;308:199–205.
   Web of Science ®Google Scholar
• Li Z, Lei J, Xu H, et al. Current status and development trend of bearing steel in China and abroad. J Iron Steel Res. 2016;28:12.
   Google Scholar
• Yu F, Chen X, Xu H, et al. Current status of metallurgical quality and fatigue performance of rolling bearing steel and development direction of high-end bearing steel. Acta Metall Sinica. 2020;56:513–522.
   Web of Science ®Google Scholar
• Chaengkham P, Srichandr P. Continuously cast ductile iron: processing, structures, and properties. J Mater Process Technol. 2011;211:1372–1378.
   Web of Science ®Google Scholar
• Abedi HR, Fareghi A, Saghafian H, et al. Sliding wear behavior of a ferritic–pearlitic nodular cast iron with different nodule count. Wear. 2010;268:622–628.
   Web of Science ®Google Scholar
• Sugishita J, Fujiyoshi S. The effect of cast iron graphite on friction and wear performance III: The lubricating effect of graphite under rolling-sliding contacts. Wear. 1982;77:181–193.
   Web of Science ®Google Scholar
• PourAsiabi H, Saghafian H, Pourasiabi H. Effect of austempering process on microstructure and wear behavior of ductile iron containing Mn-Ni-Cu-Mo. Met Mater Int. 2013;19:67–76.
   Web of Science ®Google Scholar
• Leiro A, Vuorinen E, Sundin KG, et al. Wear of nano-structured carbide-free bainitic steels under dry rolling–sliding conditions. Wear. 2013;298–299:42–47.
   Web of Science ®Google Scholar
• Kumar S, Mondal DP, Jha AK, et al. Improvement in high stress abrasive wear property of steel by hardfacing. J Mater Eng Perform. 1999;8:711–715.
   Web of Science ®Google Scholar
• Jena PSM, Sahu JK, Rai RK, et al. Influence of duplex ferritic-austenitic matrix on two body abrasive wear behavior of high chromium white cast iron. Wear. 2018;406–407:140–148.
   Web of Science ®Google Scholar
• Cetinkaya C. An investigation of the wear behaviors of white cast irons under different compositions. Mater Des. 2006;27:437–445.
   Web of Science ®Google Scholar
• Zhang Y, Chen Y, He R, et al. Investigation of tribological properties of brake shoe materials – phosphorous cast irons with different graphite morphologies. Wear. 1993;166:179–186.
   Web of Science ®Google Scholar
• Zhang X, Liu W, Godfrey A, et al. The effect of long-time austenization on the wear resistance and thermal fatigue properties of a high speed steel roll. Metall Mater Trans A. 2009;40:2171–2177.
   Web of Science ®Google Scholar
• Wang B, Liu B, Zhang X, et al. Enhancing heavy load wear resistance of AISI 4140 steel through the formation of a severely deformed compound-free nitrided surface layer. Surf Coat Technol. 2018;356:89–95.
   Web of Science ®Google Scholar
• Sharif KJ, Evans HP, Snidle RW. Prediction of the wear pattern in worm gears. Wear. 2006;261:666–673.
   Web of Science ®Google Scholar
• Stahl K, Höhn B-R, Hermes J, et al. Pitting resistance of worm gears: advanced model for contact pattern of any size, position, flank type. Gear Technol. 2012;7:44–49.
   Google Scholar
• Opalic M, Zezelj D, Vuckovic K. A new method for description of the pitting process on worm wheels propagation. Wear. 2015;332–333:1145–1150.
   Web of Science ®Google Scholar
• Fontanari V, Benedetti M, Girardi C, et al. Investigation of the lubricated wear behavior of nodular cast iron and quenched and tempered alloy steel for possible use in worm gearing. Wear. 2016;350–351:68–73.
   Web of Science ®Google Scholar
• ASTM E-8. Standard test method for tensile testing of metallic materials, annual book of ASTM standards. Philadelphia: ASTM; 2003.
   Google Scholar
• ASTM G77-2017. Standard test method for ranking resistance of materials to sliding wear using block-on-ring wear test, UA-ASTM standards. Philadelphia: ASTM; 2017.
   Google Scholar
• Panneerselvam S, Martis CJ, Putatunda SK, et al. An investigation on the stability of austenite in austempered nodular cast iron (ADI). Mater Sci Eng A. 2015;626:237–246.
   Web of Science ®Google Scholar
• Wang F, Qian DS, Mao HJ, et al. Evolution of microstructure and mechanical properties during tempering of M50 steel with Bainite/Martensite duplex structure. J Mater Res Technol. 2020;9:6712–6722.
   Google Scholar
• He T, Shao R, Liu J, et al. Sliding friction and wear properties of GCr15 steel under different loads. Trans Mater Heat Treat. 2020;41:105–110.
   Google Scholar
• Chen K, Zhang Q, Li X, et al. Dry sliding wear behavior of TC11 alloy/GCr15 steel tribo-pair. Rare Meter Mater Eng. 2015;44:1531–1535.
   Web of Science ®Google Scholar
• Tkaya MB, Mezlini S, Mansori ME, et al. On some tribological effects of graphite nodules in wear mechanism of SG cast iron: finite element and experimental analysis. Wear. 2009;267:535–539.
   Web of Science ®Google Scholar
• Andriollo T, Zhang Y, Fster S, et al. Analysis of the correlation between micro-mechanical fields and fatigue crack propagation path in nodular cast iron. Acta Mater. 2020;188:302–314.
   Web of Science ®Google Scholar
• Yildizli K, Karamis MB, Nair F. Erosion mechanisms of nodular and gray cast irons at different impact angles. Wear. 2006;261:622–633.
   Web of Science ®Google Scholar
• Zhang X, Hansen N, Godfrey A, et al. Structure and strength of sub-100 nm lamellar structures in cold-drawn pearlitic steel wire. Mater Sci Technol. 2018;34:794–808.
   Web of Science ®Google Scholar
• Nikas D, Zhang X, Ahlström J. Evaluation of local strength via microstructural quantification in a pearlitic rail steel deformed by simultaneous compression and torsion. Mater Sci Eng A. 2018;737:341–347.
   Web of Science ®Google Scholar
• Zhang X, Nielsen CV, Hansen N, et al. Local stress and strain in heterogeneously deformed aluminum: a comparison analysis by microhardness, electron microscopy and finite element modelling. Int J Plast. 2019;115:93–110.
   Web of Science ®Google Scholar
• Chen S, Hu J, Zhang X, et al. High ductility and toughness of a micro-duplex medium-Mn steel in a large temperature range from −196°C to 200°C. J Iron Steel Res Int. 2015;22:1126–1130.
   Web of Science ®Google Scholar
• Zhang X, Godfrey A, Winther G, et al. Plastic deformation of submicron-sized crystals studied by in-situ Kikuchi diffraction and dislocation imaging. Mater Charact. 2012;70:21–27.
   Web of Science ®Google Scholar