A different attempt to analysis friction stir spot welding of AA5083-copper alloys

References

• Mehta KP, Badheka VJ. Effects of tilt angle on properties of dissimilar friction stir welding copper to aluminum. Mater Manuf Process. 2016;31:255–263. DOI:10.1080/10426914.2014.994754.
   Web of Science ®Google Scholar
• Zhang CH, Robson JD, Haigh SJ, et al. Interfacial segregation of alloying elements during dissimilar ultrasonic welding of AA6111 aluminum and Ti6Al4V titanium. Metal Mater Trans A. 2019. DOI:10.1007/s11661-019-05395-7
   PubMed Web of Science ®Google Scholar
• Bagheri B, Abbasi M, Sharifi F, et al. Investigation into novel multipass friction stir vibration brazing of carbon steels. Mater Manuf Process. 2022;31(4):3369–3381. DOI:10.1080/10426914.2021.2006220.
   Web of Science ®Google Scholar
• Patel NP, Parlikar P, Dhari RS, et al. Numerical modelling on cooling assisted friction stir welding of dissimilar Al-Cu joint. J Manuf Process. 2019;47:98–109. DOI:10.1016/j.jmapro.2019.09.020.
   Web of Science ®Google Scholar
• Zhang Q, Sekol RC, Zhang CH, et al. Joining lithium-ion battery tabs using solder reinforced adhesive (SRA). J Manuf Sci Eng. 2019. DOI:10.1115/1.4042842
   PubMed Web of Science ®Google Scholar
• Zhang CQ, Liu W. Non-parabolic Al3Ti intermetallic layer growth on aluminum-titanium interface at low annealing temperatures. Mater Letter. 2019;256:126624. DOI:10.1016/j.matlet.2019.126624.
   Web of Science ®Google Scholar
• Vaneghi AH, Bagheri B, Shamsipur A, et al. Investigations into the formation of intermetallic compounds during pinless friction stir spot welding of AA2024-Zn-pure copper dissimilar joints. Weld World. 2022;66(11):2351–2369. DOI:10.1007/s40194-022-01366-6.
   Web of Science ®Google Scholar
• Mehta KP, Badheka VJ. A review on dissimilar friction stir welding of copper to aluminum: process, properties and variants. Mater Manuf Process. 2016;31:233–254. DOI:10.1080/10426914.2015.1025971.
   Web of Science ®Google Scholar
• Gao P, Zhang Y, Mehta KP. Metallurgical and mechanical properties of Al–Cu joint by friction stir spot welding and modified friction stir clinching. Met Mat Int. 2020. DOI:10.1007/s12540-020-00759-w
   Web of Science ®Google Scholar
• Zhao Y, Huang L, Zhao Z, et al. Effect of travel speed on the microstructure of Al-to-Mg FSW joints. Mater Sci Technol. 2016;32:1025–1034. DOI:10.1080/02670836.2015.1110281.
   Web of Science ®Google Scholar
• Abdollahzadeh A, Bagheri B, Abbasi M, et al. Mechanical, wear and corrosion behaviors of AZ91/SiC composite layer fabricated by friction stir vibration processing. Surf Topo: Metro Proper. 2021;9(3):035038. DOI:10.1088/2051-672X/ac2176.
   Web of Science ®Google Scholar
• Kumar A, Nayak CV, Herbert MA, et al. Microstructure and hardness of friction stir welded aluminium–copper matrix-based composite reinforced with 10 wt-% SiCp. Mater Res Innovations. 2014;18(6):84–89. DOI:10.1179/1432891714Z.0000000001016.
   Google Scholar
• Rizi VS, Abbasi M, Bagheri B. Investigation into microstructure and mechanical behaviors of joints made by friction stir vibration brazing between Low carbon steels. Physic Script. 2021;96(12):125704. DOI:10.1088/1402-4896/ac1dcb.
   Web of Science ®Google Scholar
• Dadaei M, Omidvar H, Bagheri B, et al. The effect of SiC/Al2O3 particles used during FSP on mechanical properties of AZ91 magnesium alloy. Int J Mater Res. 2014;105:369–374. DOI:10.3139/146.111025.
   Web of Science ®Google Scholar
• Kumar A, Nayak CV, Herbert MA, et al. Microstructure and hardness of friction stir welded aluminium–copper matrix-based composite reinforced with 10 wt-% SiCp. Mater Res Innovations. 2014;18(6):84–89. DOI:10.1179/1432891714Z.0000000001016.
   Google Scholar
• Bagheri B, Abbasi M, Hamzeloo R. The investigation into vibration effect on microstructure and mechanical characteristics of friction stir spot vibration welded aluminum: simulation and experiment. Proc IMechE Part C J Mech Eng Sci. 2020;234(9):1809–1822. DOI:10.1177/0954406219900194.
   Web of Science ®Google Scholar
• Wu D, Shen J, Lv L, et al. Effects of nano-SiC particles on the FSSW welded AZ31 magnesium alloy joints. Mater Sci Technol. 2017;33:998–1003. DOI:10.1080/02670836.2016.1254891.
   Web of Science ®Google Scholar
• Bagheri B. Abbasi M development of AZ91/SiC surface composite by FSP: effect of vibration and process parameters on microstructure and mechanical characteristics. Ad Manuf. 2020;8:82–96. DOI:10.1007/s40436-019-00288-9.
   Web of Science ®Google Scholar
• Li M, Zhang CH, Wang D, et al. Friction stir spot welding of aluminum and copper: a review. Mater. 2020;13:156. DOI:10.3390/ma13010156.
   Web of Science ®Google Scholar
• Bagheri B, Abbasi M, Abdollahzadeh A, et al. A comparative study between friction stir processing and friction stir vibration processing to develop magnesium surface nanocomposite. Int J Min Metall Mater. 2020;27:1133–1146. DOI:10.1007/s12613-020-1993-4.
   Web of Science ®Google Scholar
• Mehta K, Astarita A, Carlone P, et al. Investigation of exit-hole repairing on dissimilar aluminum-copper friction stir welded joints. J Mater Res Technol. 2021;13:2180–2193. DOI:10.1016/j.jmrt.2021.06.019.
   Google Scholar
• Zhao H, Zhang G, Zhang Q, et al. Joining mechanism and mechanical properties of metallic bump assisted weld-bonded (MBaWB) joints of AA6061-T6 and bare DP590. J Manuf Proc. 2020;50:204–215. DOI:10.1016/j.jmapro.2019.12.018.
   Web of Science ®Google Scholar
• Mehta KP, Badheka VJ. Hybrid approaches of assisted heating and cooling for friction stir welding of copper to aluminum joints. J Mater Proc Technol. 2016. DOI:10.1016/j.jmatprotec.2016.08.037
   Web of Science ®Google Scholar
• Mehta KP, Vishvesh JB. Influence of tool design and process parameters on dissimilar friction stir welding of copper to AA6061-T651 joints. Int J Adv Manuf Technol. 2015. DOI:10.1007/s00170-015-7176-1
   PubMed Web of Science ®Google Scholar
• Abbasi M, Givi M, Bagheri B. New method to enhance the mechanical characteristics of Al-5052 alloy weldment produced by tungsten inert gas. Proc IMechE Part B: J Eng Manuf. 2020: 1–9. DOI:10.1177/0954405420929777.
   Web of Science ®Google Scholar
• Sadeghi B, Abbasi H, Atapour M, et al. Friction stir spot welding of TiO2 nanoparticlereinforced interstitial free steel. J Mater Sci. 2020;55:12458. DOI:10.1007/s10853-020-04838-6.
   Web of Science ®Google Scholar
• Abbasi M, Baghei B. New attempt to improve friction stir brazing. Mater Letter. 2021;304:130688. DOI:10.1016/j.matlet.2021.130688.
   Web of Science ®Google Scholar