Grain boundary and grain interior strengthening in nano-micron grain sized Cu-1wt.%Al₂O₃ composite

References

• Li C, Xie Y, Zhou D, et al. A novel way for fabricating ultrafine grained Cu-4.5 vol% Al2O3 composite with high strength and electrical conductivity. Mater Charact 2019;155:109775.
   Web of Science ®Google Scholar
• Chandrasekhar SB, Sudhakara Sarma S, Ramakrishna M, et al. Microstructure and properties of hot extruded Cu-1 wt. %Al2O3 nanocomposites synthesized by various techniques. Mater Sci Eng A. 2014;591:46–53.
   Web of Science ®Google Scholar
• Chandrasekhar SB, Wasekar NP, Ramakrishna M, et al. Dynamic strain ageing in fine grained Cu-1 wt. %Al2O3 composite processed by two step ball milling and spark plasma sintering. J Alloys Compd 2016;656:423–430.
   Web of Science ®Google Scholar
• Zhou D, Wang X, Muránsky O, et al. Heterogeneous microstructure of an Al2O3 dispersion strengthened Cu by spark plasma sintering and extrusion and its effect on tensile properties and electrical conductivity. Mater Sci Eng A. 2018;730:328–335.
   Web of Science ®Google Scholar
• Feng X, Zhang D, Feng B, et al. Microstructure and properties of Cu-0.4 wt.% Al2O3 composites fabricated by hot extrusion and cold drawing. J Mater Eng Perform 2022;31:1241–1249.
   Google Scholar
• Hall EO. The deformation and ageing of mild steel: III discussion of results. Proc Phys Soc London Sect B. 1951;64:747–753.
   Google Scholar
• Petch NJ. The cleavage strength of polycrystals. J Iron Steel Inst 1953;174:25–28.
   Web of Science ®Google Scholar
• Kim HS, Estrin Y, Bush MB. Plastic deformation behavior of fine-grained materials. Acta Mater. 2000;48:493–504.
   Web of Science ®Google Scholar
• Hansen N, Ralph B. The strain and grain size dependence of the flow stress of copper. Acta Metall 1982;30:411–417.
   Google Scholar
• Dollar M, Thompson AW. The effect of grain size and strain on the tensile flow stress of quenched aluminum. Acta Metall 1987;35:227–235.
   Google Scholar
• Sanders PG, Eastman JA, Weertman JR. Elastic and tensile behavior of nanocrystalline copper and palladium. Acta Mater 1997;45:4019–4025.
   Web of Science ®Google Scholar
• Youngdahl CJ, Sanders PG, Eastman JA, et al. Compressive yield strengths of nanocrystalline Cu and Pd. Scr Mater 1997;37:809–813.
   Web of Science ®Google Scholar
• Dongju L, Malik AU, Yoochul S, et al. The effect of sintering conditions and ZrN volume fraction on the mechanical properties of spark plasma sintered W/ZrN composites. Mater Sci Eng A. 2012;552:481–485.
   Web of Science ®Google Scholar
• Sun H, Shi Y. An investigation on Hall–Petch relationship in electrodeposited nanocrystalline Cu–Ni–P alloys. J Mater Sci Technol 2009;25:347–350.
   Web of Science ®Google Scholar
• Armstrong RW. Engineering science aspects of the Hall–Petch relation. Acta Mech 2014;225:1013–1028.
   Web of Science ®Google Scholar
• Hansen N. Hall–Petch relation and boundary strengthening. Scr Mater. 2004;51:801–806.
   Web of Science ®Google Scholar
• Meyers MA, Chawla KK. Mechanical behavior of materials. NJ: Prentice-Hall; 1999.
   Google Scholar
• Kashyap BP, Tangri K. On the Hall–Petch relationship and substructural evolution in type 316L stainless steel. Acta Metall Mater 1995;43:3971–3981.
   Google Scholar
• Thompson AW. Effect of grain size on work hardening in nickel. Acta Metall 1977;25:83–86.
   Google Scholar
• Lloyd DJ. Deformation of fine-grained aluminium alloys. Met Sci 1980;14:193–198.
   Web of Science ®Google Scholar
• Bouaziz O, Estrin Y, Brechet Y, et al. Critical grain size for dislocation storage and consequences for strain hardening of nanocrystalline materials. Scr Mater 2010;63:477–479.
   Web of Science ®Google Scholar
• Zen XH, Eisenlohr P, Blum W. Modelling the transition from strengthening to softening due to grain boundaries. Mater Sci Eng A. 2008;483–484:95–98.
   Web of Science ®Google Scholar
• Armstrong RW, Codd I, Doutwaite RM, et al. The plastic deformation of polycrystalline aggregates. Philos. Mag. A J. Theor. Exp. Appl. Phys. 1962;7:45–58.
   Google Scholar
• Li JCM. Petch relation and grain boundary sources. Trans. TMS-AIME. 1963;227:239–247.
   Google Scholar
• Kashyap BP, Tangri K. Hall–Petch relationship and substructural evolution in boron containing type 316L stainless steel. Acta Mater 1997;45:2383–2395.
   Web of Science ®Google Scholar
• Janecek M, Tangri K. Substructure evolution and flow behavior of AISI 316L stainless steel polycrystals at room temperature. Mater Sci Eng A 1991;138:237–245.
   Web of Science ®Google Scholar
• Kuhlmann-Wilsdorf D. Theory of work hardening 1934–1984. Metall Trans A 1985;16:2091–2108.
   Web of Science ®Google Scholar
• Courtney TH. Mechanical behavior of materials. New York: McGraw-Hill; 2000.
   Google Scholar
• Kashyap BP. Towards interrelationship of grain size, cell parameters and flow stress in type 316L stainless steel. Acta Mater. 2002;50:2413–2427.
   Web of Science ®Google Scholar
• Ashby MF. The deformation of plastically non-homogeneous materials. Philos. Mag. A J. Theor. Exp. Appl. Phys. 1970;21:399–424.
   Google Scholar
• Young CM, Sherby OD. Subgrain formation and subgrain-boundary strengthening in iron-based materials. J Iron Steel Inst 1973;211:640–647.
   Web of Science ®Google Scholar