Optimization of wood machining parameters using artificial neural network in CNC router

References

• Malkocoglu A, Ozdemir T. The machining properties of some hardwoods and softwoods naturally grown in Eastern Black Sea Region of Turkey. J Mater Process Technol. 2006;173(3):315–320.
   Web of Science ®Google Scholar
• Pelit H, Korkmaz M, Budakci M. Surface roughness of thermally treated wood cut with different parameters in CNC router machine. BioResources. 2021;16(3):5133–5147.
   Web of Science ®Google Scholar
• Zhong ZW. Surface roughness of machined wood and advanced engineering materials and its prediction: a review. Adv Mech Eng. 2021;13(5):1–19.
   Web of Science ®Google Scholar
• Davim JP, editor. Wood machining. 1 ed. London: Wiley; 2011.
   Google Scholar
• Csanády E, Magoss E. Mechanics of wood machining. Berlin: Springer; 2013.
   Google Scholar
• Hazir E, Koc KH. Optimization of wood machining parameters in CNC routers: Taguchi orthogonal array based simulated angling algorithm. Maderas Ciencia Tecnol. 2019;21(4):493–510.
   Web of Science ®Google Scholar
• Binali R, Kuntoglu M, Pimenov DY, et al. Advance monitoring of hole machining operations via intelligent measurement systems: a critical review and future trends. Measurement (Mahwah N J). 2022;201:1–27.
   Google Scholar
• Aguilera A, Martin P. Machining qualification of solid wood of Fagus silvatica L. and Picea excelsa L.: cutting forces, power requirements and surface roughness. Holz Roh-und Werkstoff. 2001;59(6):483–488.
   Google Scholar
• Cristóvão L. Machining properties of wood: tool wear, cutting force and tensioning of blades [Doctoral dissertation]. Skellefteå: Luleå tekniska universitet; 2013.
   Google Scholar
• Porankiewicz B, Marklund B, Grönlund A, et al. Main and normal cutting forces by machining wood of Pinus sylvestris. BioResources. 2011;6(4):3687–3713.
   Web of Science ®Google Scholar
• Kumar K, Ranjan C, Davim JP. Non-conventional machining. CNC programming for machining. Materials forming, machining and tribology. Cham: Springer; 2020. p. 73–87.
   Google Scholar
• Sofuoglu SD. Using artificial neural networks to model the surface roughness of massive wooden edge-glued panels made of scotch pine (Pinus sylvestris L.) in a machining process with computer numerical control. BioResources. 2015;10(4):6797–6808.
   Web of Science ®Google Scholar
• Cakmak A. Investigation of optimal parameters with artificial neural networks in machining of some wood species in CNC router machine [Doctoral thesis]. Trabzon: Karadeniz Technical University; 2021.
   Google Scholar
• Zhang G, Patuwo BE, Hu MY. Forecasting with artificial neural networks: the state of the art. Int J Forecast. 1998;14(1):35–62.
   Web of Science ®Google Scholar
• Ozsahin S, Murat M. Prediction of equilibrium moisture content and specific gravity of heat-treated wood by artificial neural networks. Eur J Wood Wood Prod. 2018;76(2):563–572.
   Web of Science ®Google Scholar
• Savkovic B, Kovac P, Rodic D, et al. Comparison of artificial neural network, fuzzy logic and genetic algorithm for cutting temperature and surface roughness prediction during the face milling process. Adv Prod Eng Manage. 2020;15(2):137–150.
   Web of Science ®Google Scholar
• Ozsahin S, Singer H. Development of an artificial neural network model to minimize power consumption in the milling of heat-treated and untreated wood. Kastamonu Univ J Forestry Faculty. 2019;19(3):317–328.
   Web of Science ®Google Scholar
• Tiryaki S, Ozsahin S, Aydin A. Employing artificial neural networks for minimizing surface roughness and power consumption in abrasive machining of wood. Eur J Wood Wood Prod. 2017;75(3):347–358.
   Web of Science ®Google Scholar
• Gurgen A, Cakmak A, Yildiz S, et al. Optimization of CNC operating parameters to minimize surface roughness of Pinus sylvestris using integrated artificial neural network and genetic algorithm. Maderas Ciencia Tecnol. 2022;24(1):1–12.
   Google Scholar
• Pimenov DY, Bustillo A, Wojciechowski S, et al. Artificial intelligence systems for tool condition monitoring in machining: analysis and critical review. J Intell Manuf. 2022:1–43. doi:10.1007/s10845-022-01923-2.
   Web of Science ®Google Scholar
• Demir A, Cakiroglu EO, Aydin I. Determination of CNC processing parameters for the best wood surface quality via artificial neural network. Wood Material Science & Engineering. 2022;17(6):685–692.
   Web of Science ®Google Scholar
• Tiryaki S, Malkocoglu A, Ozsahin S. Artificial neural network modeling to predict optimum power consumption in wood machining. Drewno. 2016;59(196):109–125.
   Web of Science ®Google Scholar
• Iskra P, Hernández RE. The influence of cutting parameters on the surface quality of routed paper birch and surface roughness prediction modeling. Wood Fiber Sci. 2009;41(1):28–37.
   Web of Science ®Google Scholar
• Prommul K, Kaewtatip P, Arlai T, et al. Investigation on the influences of cutting parameters in CNC machining of rubber wood with integration of neural networks. 2nd international symposium on wood machining; Vienna, Austria; 2004.
   Google Scholar
• Chladil J, Sedlák J, Rybářová EŠ, et al. Cutting conditions and tool wear when machining wood-based materials. BioResources. 2019;14(2):3495–3505.
   Web of Science ®Google Scholar
• Kazlauskas D, Jankauskas V, Bendikienė R, et al. Wear of cemented tungsten carbide (WC) router cutters during oak wood milling. Mechanika. 2017;23(3):469–472.
   Web of Science ®Google Scholar
• Karagoz U, Akyildiz MH, Isleyen O. Effect of heat treatment on surface roughness of thermal wood machined by CNC. Pro Ligno. 2011;7(4):50–58.
   Google Scholar
• Lemaster RL, Stewart JS. Wood machining and tooling research programs research summary. Proceedings of the 3rd international symposium. Raleigh: North Carolina State University Wood and Paper Science Dept; 1994.
   Google Scholar
• Malkocoglu A. Machining properties and surface roughness of various wood species planed in different conditions. Build Environ. 2007;42(7):2562–2567.
   Web of Science ®Google Scholar
• Ramanakoto MF, Andrianantenaina AN, Ramananantoandro T, et al. Visual and visuo-tactile preferences of Malagasy consumers for machined wood surfaces for furniture: acceptability thresholds for surface parameters. Eur J Wood Wood Prod. 2017;75(5):825–837.
   Web of Science ®Google Scholar
• Mitchell PH, Lemaster RL. Investigation of machine parameters on the surface quality in routing soft maple. Forest Prod J. 2002;52(6):85.
   Web of Science ®Google Scholar
• Škaljić N, Beljo Lučić R, Čavlović A, et al. Effect of feed speed and wood species on roughness of machined surface. Drvna Indus. 2009;60(4):229–234.
   Web of Science ®Google Scholar
• Sogutlu C. The effect of some factors on surface roughness at planning process of cedar wood. J Polytech. 2010;13(3):177–181.
   Google Scholar
• Aykac E, Sofuoglu SD. Investigation of the effect of machining parameters on surface quality in bamboo. Tehnički Vjesnik. 2021;28(2):684–688.
   Web of Science ®Google Scholar
• Su W-C, Wang Y. Effect of the helix angle of router bits on chip formation and energy consumption during milling of solid wood. J Wood Sci. 2002;48(2):126–131. doi:10.1007/BF00767289
   Web of Science ®Google Scholar
• Sutcu A, Karagoz U. The influence of process parameters on the surface roughness in aesthetic machining of wooden edge-glued panels (EGPs). BioResources. 2013;8(4):5435–5448.
   Web of Science ®Google Scholar
• Jiang S, Buck D, Tang Q, et al. Cutting force and surface roughness during straight-tooth milling of walnut wood. Forests. 2022;13(12):2126.
   Web of Science ®Google Scholar
• Kminiak R. The effect of selected factors on the milled surface quality of native sycamore maple wood and thermally modified sycamore maple wood. Innov Woodworking Ind Eng Des. 2019;8(1):105–112.
   Google Scholar
• Davis EM. Machining and related characteristics of United States hardwoods. Washington (DC): U.S. Department of Agriculture; 1962.
   Google Scholar
• Koch P. Wood machining processes; a volume in the wood processing series. New York: The Ronald Press Company; 1964.
   Google Scholar
• Stewart HA. Some surfacing defects and problems related to wood moisture content. Wood Fiber Sci. 1980;12(3):175–182.
   Web of Science ®Google Scholar
• Pinheiro C, de Sampaio Alves MC, Simões Amaral S. Moisture content and its influence on the roughness and noise emission during wood machining. Advanced Materials Research. 2015;1088:680–685.
   Google Scholar
• Fu W, Guan H, Chen B. Investigation on the influence of moisture content and wood section on the frictional properties of beech wood surface. Tribol Trans. 2021;64(5):830–840.
   Web of Science ®Google Scholar
• Naylor A, Hackney P. A review of wood machining literature with a special focus on sawing. BioResources. 2013;8(2):3122–3135.
   Web of Science ®Google Scholar
• Durkovic M, Mladenovic G, Tanovic L, et al. Impact of feed rate, milling depth and tool rake angle in peripheral milling of oak wood on the cutting force. Maderas Ciencia Tecnol. 2018;20(1):25–34.
   Web of Science ®Google Scholar
• Koleda P, Barcík Š, Svoreň J, et al. Influence of cutting wedge treatment on cutting power, machined surface quality, and cutting-edge wear when plane milling oak wood [cutting edge wear; cutting power; plane milling; surface roughness]. BioResources. 2019;14(4):9271–9286.
   Web of Science ®Google Scholar
• Sedlecký M, Gašparík M. Power consumption during edge milling of medium-density fiberboard and edge-glued panel. BioResources. 2017;12(4):7413–7426.
   Web of Science ®Google Scholar
• Bal BC, Dumanoğlu F. Surface roughness and processing time of a medium density fiberboard cabinet door processed via CNC router, and the energy consumption of the CNC router. BioResources. 2019;14(4):9500–9508.
   Web of Science ®Google Scholar
• Salca E-A. Optimization of wood milling schedule – a case study. Dimensions. 2015;2000:160.
   Google Scholar
• Zhu Z, Buck D, Guo X, et al. Energy efficiency optimization for machining of wood plastic composite. Machines. 2022;10(2):104.
   Web of Science ®Google Scholar
• Mendoza BA. Power consumption and planing quality of coconut lumber (Cocos nucifera L.) as affected by density and some machining variable [Doctoral thesis]. Los Banos: Philippines University; 1989.
   Google Scholar
• Berkel A. Wood machining technology. Vol. 183. İstanbul: Faculty of Forestry of İstanbul University; 1972.
   Google Scholar
• Ross RJ. Wood handbook: wood as an engineering material. Vol. 190. Madison, WI: United States Department of Agriculture Forest Service; 2010.
   Google Scholar
• Eyma F, Méausoone P-J, Martin P. Study of the properties of thirteen tropical wood species to improve the prediction of cutting forces in mode B. Ann For Sci. 2004;61(1):55–64.
   Web of Science ®Google Scholar
• Gurleyen L, Subasi S. The compulsions which the hard tree materials show against to the cutters and machine in planning process. J Faculty Eng Architect Gazi Univ. 2009;24(2):209–219.
   Web of Science ®Google Scholar