Effect of P-MIG and CMT on microstructure and properties of 6082-T6 joints

References

• Panagopoulos CN, Georgiou EP, Gavras AG. Corrosion and wear of 6082 aluminum alloy. Tribol Int. 2008;42(6):886–889.
   Web of Science ®Google Scholar
• Liu F, Yu FX, Zhao DZ, et al. Microstructure and mechanical properties of an Al-12.7Si-0.7Mg alloy processed by extrusion and heat treatment. Mat Sci Eng A-Struct. 2011;528(10):3786–3790.
   Google Scholar
• Min D. Joining of 6061 aluminium ultrasonic soldered of Sn–Pb–Zn alloys. Mater Sci Tech-LOND; 2013;29(3):342–345.
   Web of Science ®Google Scholar
• Kaibyshev R, Musin F, Gromov D, et al. Grain refinement and superplastic behaviour of a modified 6061 aluminium alloy. Mater Sci Tech-LOND. 2003;19(4):483–490.
   Web of Science ®Google Scholar
• Li H, Zou JS, Yao JS, et al. The effect of TIG welding techniques on microstructure, properties and porosity of the welded joint of 2219 aluminum alloy. J Alloy Compd. 2017;727:1–8.
   Web of Science ®Google Scholar
• Taban E, Kaluc E. Comparison between microstructure characteristics and joint performance of 5086-H32 aluminium alloy welded by MIG, TIG and friction stir welding processes. Kovove Mater. 2007;45(5):241–248.
   Web of Science ®Google Scholar
• Potluri NB, Ghosh PK, Gupta PC, et al. Studies on weld metal characteristics and their influence on tensile and fatigue properties of pulsed-current GMA welded Al-Zn-Mg alloy. Weld J. 1996;75(2):62–70.
   Web of Science ®Google Scholar
• Viscusi A, Leitão C, Rodrigues DM, et al. Laser beam welded joints of dissimilar heat treatable aluminium alloys. J Mater Process Tech. 2016;236:48–55.
   Web of Science ®Google Scholar
• Feng JC, Zhang HT, He P. The CMT short-circuiting metal transfer process and its use in thin aluminium sheets welding. Mater Design. 2008;30(5):1850–1852.
   Web of Science ®Google Scholar
• Rodrigues DM, Menezes LF, Loureiro A. The influence of the HAZ softening on the mechanical behaviour of welded joints containing cracks in the weld metal. Eng Fract Mech. 2003;71(13):2053–2064.
   Web of Science ®Google Scholar
• Derekar KS, Addison A, Joshi SS, et al. Effect of pulsed metal inert gas (pulsed-MIG) and cold metal transfer (CMT) techniques on hydrogen dissolution in wire arc additive manufacturing (WAAM) of aluminum. Int J Adv Manuf Technol. 2020;107(1-3):311–331.
   Web of Science ®Google Scholar
• Liu HB, Yang SL, Xie CJ, et al. Microstructure characterization and mechanism of fatigue crack initiation near pores for 6005A CMT welded joint. Mat Sci Eng A-Struct. 2017;707:22–29.
   Google Scholar
• Ebrahimzadeh I, Sadeghi B, Maddahi H. Welding of thin sheet of Al5456 aluminum alloy by using GTA and GMA welding process. Mater Res Express. 2019;6(6):066546–066546.
   Web of Science ®Google Scholar
• Dong XJ, Li H, Yang LJ, et al. Microstructure and mechanical properties of P-MIG aluminum alloy welded joints by means of a novel multi-strands composite welding wire. Trans China Welding Inst. 2019;40(11):61–67. +163-164 (in Chinese).
   Google Scholar
• Elrefaey A. Effectiveness of cold metal transfer process for welding 7075 aluminium alloys. Sci Technol Weld Joi. 2015;20(4):280–285.
   Web of Science ®Google Scholar
• Zhao YL, Chen FR, Cao SL, et al. Effect of CMT welding heat input on microstructure and properties of 2A14 aluminum alloy joint. Metals-Basel. 2022;12(12):2100–2100.
   Web of Science ®Google Scholar
• Zhang YL, Lu FG, Wang HP, et al. Reduced hot cracking susceptibility by controlling the fusion ratio in laser welding of dissimilar Al alloys joints. J Mater Res. 2015;30(7):993–1001.
   Web of Science ®Google Scholar
• Zhan XH, Zhao YQ, Liu ZM, et al. Microstructure and porosity characteristics of 5A06 aluminum alloy joints using laser-MIG hybrid welding. J Manuf Process. 2018;35:437–445.
   Web of Science ®Google Scholar
• Dewan MW, Wahab MA, Okeil AM. Influence of weld defects and post weld heat treatment of gas tungsten arc-welded AA-6061-T651 aluminum alloy. J Manuf Sci E-T ASME. 2015;137(5):1–33.
   Web of Science ®Google Scholar
• Han YL, Xue SB, Fu RL, et al. Influence of hydrogen embrittlement on impact property and microstructural characteristics in aluminum alloy weld. Vacuum. 2020;172(C):109073–109073.
   Google Scholar
• Kutsuna M, Yan Q. Study on porosity formation in laser welds in aluminium alloys (Report 1) effects of hydrogen and alloying elements. Weld Int. 1998;12:937–949.
   Google Scholar
• Fan CL, Chen C, Lin SB, et al. Microstructure homogenization of 2A14 aluminum alloy weld seam by ultrasonic irradiation in metal inert gas welding. Int J Adv Manuf Technol. 2020;108(prepublish):1–5.
   Google Scholar
• Kumar R, Dilthey U, Dwivedi DK, et al. Welding of thin sheet of Al alloy (6082) by using Vario wire DC P-GMAW. Int J Adv Manuf Technol. 2009;42(1-2):102–117.
   Web of Science ®Google Scholar
• Li RF, Zhang F, Sun TZ, et al. Investigation of strengthening mechanism of commercially pure titanium joints fabricated by autogenously laser beam welding and laser-MIG hybrid welding processes. Int J Adv Manuf Technol. 2019;101(1):377–389.
   Web of Science ®Google Scholar
• Huan PC, Wang XN, Zhang J, et al. Effect of wire composition on microstructure and properties of 6063 aluminum alloy hybrid synchronous pulse CMT welded joints. Mat Sci Eng A-Struct. 2020;790(pre-publish):1–42.
   Google Scholar
• Pozdniakov AV, Yarasu V, Barkov RY, et al. Microstructure and mechanical properties of novel Al-Mg-Mn-Zr-Sc-Er alloy. Mater Lett. 2017;202:116–119.
   Web of Science ®Google Scholar
• Vladivoj O, Margarita S. Resistance to recrystallization due to Sc and Zr addition to Al-Mg alloys. Mater Charact. 2001;47:157–162.
   Web of Science ®Google Scholar
• Vandyoussefi M, Worth J, Greer AL. Effect of instability of TiC particles ongrain refinement of Al and Al-Mg alloys by addition of Al-Ti-C inoculants. Mater Sci Tech-LOND. 2000;16(10):1121–1128.
   Web of Science ®Google Scholar
• Ezuber H, El-Houd A, El-Shawesh F. A study on the corrosion behavior of aluminum alloys in seawater. Mater Design. 2008;29(4):801–805.
   Web of Science ®Google Scholar
• Hamana D, Bouchear M, Betrouche M, et al. Comparative study of formation and transformation of transition phases in Al-12wt.% Mg alloy. J Alloy Compd. 2001;320(1):93–102.
   Web of Science ®Google Scholar
• Liu Y, Wang WJ, Xie JJ, et al. Microstructure and mechanical properties of aluminum 5083 weldments by gas tungsten arc and gas metal arc welding. Mat Sci Eng A-Struct. 2012;549:7–13.
   Google Scholar
• Zajac S, Hutchinson B, Johansson A, et al. Microstructure control and extrudability of aluminium-Mg-Si alloys microalloyed with manganese. Le Journal de Physique IV. 1993;3(C7):251–254.
   Google Scholar
• Shen L, Guo YJ, Shi ZM. Microstructure and mechanical properties of As-cast 5182 aluminum alloy modified with Al-RE and Al-5Ti-1B Master alloys. Matec Web Conf. 2016;67:05026–05026.
   Google Scholar
• Luo XE, Fang HJ, Liu H, et al. Effect of Sc and Zr on Al6(Mn, Fe) phase in Al-Mg-Mn alloys. Mater Trans. 2019;60(5):737–742.
   Web of Science ®Google Scholar
• Elsharkawi EA, Abdelaziz MH, Doty HW, et al. Effect of β-Al5FeSi and π-Al8Mg3FeSi6 phases on the impact toughness and fractography of Al-Si-Mg-based alloys. Int J Metalcast. 2017;12:148–163.
   Google Scholar
• Seifeddine S, Johansson S, Svensson IL. The influence of cooling rate and manganese content on theβ-Al5FeSi phase formation and mechanical properties of Al–Si-based alloys. Mat Sci Eng A-Struct. 2008;490(1-2):385–390.
   Google Scholar
• Zhuang L, Bottema J, Kaasenbrood P, et al. The effect of small particles on annealed grain size and texture of Al-Mg-Si alloys. Mater Sci Forum. 1996;217-222:487–492.
   Google Scholar
• Rokhlin LL, Dobatkina TV, Bochvar NR. Investigation of phase equilibria in alloys of the Al-Zn-Mg-Cu-Zr-Sc system. J Alloy Compd. 2004;367(1/2):10–16.
   Web of Science ®Google Scholar
• Wang F, Qiu D, Liu ZL, et al. The grain refinement mechanism of cast aluminium by zirconium. Acta Mater 2013;61(15):5636–5645.
   Web of Science ®Google Scholar
• Wang F, Liu ZL, Qiu D, et al. Revisiting the role of peritectics in grain refinement of Al alloys. Acta Mater 2013;61(1):360–370.
   Web of Science ®Google Scholar
• Liu FC, Ma ZY, Zhang FC. High strain rate superplasticity in a micro-grained A1-Mg-Sc alloy with predominant high angle grain boundaries. J Mater Sci Technol. 2012;28(11):1025–1030.
   Web of Science ®Google Scholar
• Bochvar NR, Rybalchenko OV, Leonova NP, et al. Effect of cold plastic deformation and subsequent aging on the strength properties of Al-Mg2Si alloys with combined (Sc + Zr) and (Sc + Hf) additions. J Alloy Compd. 2020;821(C):153426–153435.
   Google Scholar
• Starink MJ, Cao LF, Rometsch PA. A model for the thermodynamics of and strengthening due to co-clusters in Al–Mg–Si-based alloys. Acta Mater 2012;60(10):4194–4207.
   Web of Science ®Google Scholar
• Yang DX, Li XY, He DY, et al. Effect of minor Er and Zr on microstructure and mechanical properties of Al-Mg-Mn alloy (5083) welded joints. Mat Sci Eng A-Struct. 2013;561:226–231.
   Google Scholar