Effect of radial-shear rolling on particle’s morphology and mechanical properties of AA7075 alloy

References

• Hirsch J. Recent development in aluminium for automotive applications. T. Nonferr Metal Soc. 2014;24:1995–2002.
   Web of Science ®Google Scholar
• Xiao W, Wang B, Wu Y, et al. Constitutive modeling of flow behavior and microstructure evolution of AA7075 in hot tensile deformation. Mater Sci Eng A. 2018;712:704–713. doi:10.1016/j.msea.2017.12.028.
   Web of Science ®Google Scholar
• Elagin V. Paths of development of high-strength and heat-resistant structural aluminum alloys in the 21st century. Met Sci Heat Treat. 2007;49:427–434. doi:10.1007/s11041-007-0081-y.
   Web of Science ®Google Scholar
• Valiev RZ, Alexandrov IV, Zhu YT, et al. Paradox of strength and ductility in metals processed by severe plastic deformation. J Mater Res. 2014;17:5–8. doi:10.1557/JMR.2002.0002.
   Web of Science ®Google Scholar
• Lowe TC, Valiev RZ, Li X, et al. Commercialization of bulk nanostructured metals and alloys. MRS Bull. 2021;46:265–272. doi:10.1557/s43577-021-00060-0.
   Web of Science ®Google Scholar
• Koch CC, Langdon TG, Lavernia EJ. Bulk nanostructured materials. Metall Mater Trans A. 2017;48:5181–5199. doi:10.1007/s11661-017-4298-0.
   Web of Science ®Google Scholar
• Valiev RZ, Estrin Y, Horita Z, et al. Producing bulk ultrafine-grained materials by severe plastic deformation: ten years later. JOM. 2016;68:1216–1226. doi:10.1007/s11837-016-1820-6.
   Web of Science ®Google Scholar
• Ghosh A, Ghosh M, Gudimetla K, et al. Development of ultrafine grained Al–Zn–Mg–Cu alloy by equal channel angular pressing: microstructure, texture and mechanical properties. Archiv Civ Mech Eng. 2020;20:7, doi:10.1007/s43452-019-0003-y.
   Web of Science ®Google Scholar
• Pirgazi H, Akbarzadeh A, Petrov R, et al. Microstructure evolution and mechanical properties of AA1100 aluminum sheet processed by accumulative roll bonding. Mater Sci Eng A. 2008;497:132–138. doi:10.1016/j.msea.2008.06.025.
   Web of Science ®Google Scholar
• Mohammadi A, Enikeev NA, Murashkin MY, et al. Examination of inverse Hall-petch relation in nanostructured aluminum alloys by ultra-severe plastic deformation. J Mater Sci Technol. 2021;91:78–89. doi:10.1016/j.jmst.2021.01.096.
   Web of Science ®Google Scholar
• Muñoz JA, Avalos M, Schell N, et al. Comparison of a low carbon steel processed by cold rolling (CR) and asymmetrical rolling (ASR): heterogeneity in strain path, texture, microstructure and mechanical properties. J Manuf Process. 2021;64:557–575. doi:10.1016/j.jmapro.2021.02.017.
   Web of Science ®Google Scholar
• Pustovoytov D, Pesin A, Biryukova O. Finite element analysis of strain gradients in aluminium alloy sheets processed by asymmetric rolling. Procedia Manuf. 2018;15:129–136. doi:10.1016/j.promfg.2018.07.186.
   Google Scholar
• Galkin SP. Regulating radial-shear and screw rolling on the basis of the metal trajectory. Steel Transl. 2004;34(7):57–60.
   Google Scholar
• Romantsev BA, Galkin SP, Mikhajlov VK, et al. Bar micromill. Stal. 1995;2:40–42.
   Google Scholar
• Xin C, Sun Q, Xiao L, et al. Synergetic strengthening of grain refinement and texture in gradient zircaloy-4 by surface mechanical rolling treatment. J of Materi Eng and Perform. 2019;28:6354–6364. doi:10.1007/s11665-019-04358-8.
   Web of Science ®Google Scholar
• Wu X, Jiang P, Chen L, et al. Extraordinary strain hardening by gradient structure. Proc Natl Acad Sci USA. 2014;111:7197–7201. doi:10.1073/pnas.1324069111.
   PubMed Web of Science ®Google Scholar
• Prokof’eva OV, Beygelzimer YY, Usov VV, et al. Formation of a gradient structure in a material by twist extrusion. Russ Metall. 2020;2020:573–578. doi:10.1134/S0036029520050110.
   Web of Science ®Google Scholar
• Gamin Y, Akopyan T, Koshmin A, et al. Investigation of the microstructure evolution and properties of A1050 aluminum alloy during radial-shear rolling using FEM analysis. Int J Adv Manuf Technol. 2020;108:695–704. doi:10.1007/s00170-020-05227-8.
   Web of Science ®Google Scholar
• Galkin SP, Aleschenko AS, Romantsev BA, et al. Effect of preliminary deformation of continuously cast billets by radial-shear rolling on the structure and properties of Hot-rolled chromium-containing steel pipes. Metallurgist. 2021;65:185–195. doi:10.1007/s11015-021-01147-4.
   Web of Science ®Google Scholar
• Gamin YV, Akopyan TK, Koshmin AN, et al. Microstructure evolution and property analysis of commercial pure Al alloy processed by radial-shear rolling. Archiv Civ Mech Eng. 2020;20:143, doi:10.1007/s43452-020-00143-w.
   Web of Science ®Google Scholar
• Naizabekov AB, Lezhnev SN, Panin E. Formation of a gradient structure in austenitic stainless steel AISI 321 by radial-shear rolling. Solid State Phenom. 2021;316:246–251. doi:10.4028/www.scientific.net/ssp.316.246.
   Google Scholar
• Panov EI. Improving the ductility properties of hard-to-deform hypereutectoid silumin alloys by helical rolling. Metallurgist. 2004;48:286–291. doi:10.1023/B:MELL.0000042830.60323.f8.
   Web of Science ®Google Scholar
• Shatalov RL, Medvedev VA. Effect of deformed workpiece temperature inhomogeneity on mechanical properties of thin-walled steel vessels during treatment in a rolling and pressing line. Metallurgist. 2019;63:176–182. doi:10.1007/s11015-019-00807-w.
   Web of Science ®Google Scholar
• Akopyan TK, Gamin YV, Galkin SP, et al. Radial-shear rolling of high-strength aluminum alloys: finite element simulation and analysis of microstructure and mechanical properties. Mater Sci Eng A. 2020;768:139424, doi:10.1016/j.msea.2020.139424.
   Web of Science ®Google Scholar
• Dobatkin S, Galkin S, Estrin Y, et al. Grain refinement, texture, and mechanical properties of a magnesium alloy after radial-shear rolling. J Alloys Compd. 2019;774:969–979. doi:10.1016/j.jallcom.2018.09.065.
   Web of Science ®Google Scholar
• Igathinathane C, Pordesimo LO, Columbus EP, et al. Shape identification and particles size distribution from basic shape parameters using ImageJ. Comput Electron Agric. 2008;63:168–182. doi:10.1016/j.compag.2008.02.007.
   Web of Science ®Google Scholar
• Shelekhov EV, Sviridova TA. Programs for X-ray analysis of polycrystals [J]. Met Sci Heat Treat. 2000;42:309–313. doi:10.1007/BF02471306.
   Web of Science ®Google Scholar
• YuV G, Koshmin AN, Kin T, et al. Comparative analysis of stress-strain state of bars from aluminum alloys A2024 and A7075 processed by RSR based on FEM modeling. Mater Today: Proc. 2021;46:8138–8142. doi:10.1016/j.matpr.2021.03.106.
   Google Scholar
• Akopyan TK, Belov NA, Aleshchenko AS, et al. Formation of the gradient microstructure of a new Al alloy based on the Al-Zn-Mg-Fe-Ni system processed by radial-shear rolling. Mater Sci Eng A. 2019;746:134–144. doi:10.1016/j.msea.2019.01.029.
   Web of Science ®Google Scholar
• Kumar SR, Gudimetla K, Venkatachalam P, et al. Microstructural and mechanical properties of Al 7075 alloy processed by equal channel angular pressing. Mater Sci Eng A. 2012;533:50–54. doi:10.1016/j.msea.2011.11.031.
   Web of Science ®Google Scholar
• Shurkin PK, Akopyan TK, Galkin SP, et al. Effect of radial shear rolling on the structure and mechanical properties of a New-generation high-strength aluminum alloy based on the Al-Zn-Mg-Ni-Fe system. Met Sci Heat Treat. 2019;60(11-12):764–769. doi:10.1007/s11041-019-00353-x.
   Web of Science ®Google Scholar
• Lezhnev SN, Naizabekov AB, Panin EA, et al. Graded microstructure preparation in austenitic stainless steel during radial-shear rolling. Metallurgist. 2021;64:1150–1159. doi:10.1007/s11015-021-01100-5.
   Web of Science ®Google Scholar